Współczesne technologie wytwarzania w przemyśle lotniczym. Cz. I

• Autorzy: Jóźwik Jerzy
• Języki publikacji: PL

Abstrakty

PL

W artykule przedstawiono i omówiono wybrane technologie wytwarzania stosowane w przemyśle lotniczym. Skupiono się na technologiach obróbki ubytkowej, szczególnie w przypadku kształtowania części konstrukcji statków powietrznych.

Słowa kluczowe

PL

obróbka szybkościowa; obróbka HSM; narzędzia mechatroniczne; przemysł lotniczy

• Wydawca: ELAMED Media Group
• Czasopismo: Stal, Metale & Nowe Technologie
• Rocznik: 2023
• Tom: nr 1-2
• Strony: 16--18
• Opis fizyczny: Bibliogr. 40 poz., rys.

Twórcy

autor

Jóźwik Jerzy

Bibliografia

• [1] Adamski W.: Impact of Modern Manufacturing Technologies at Aircraft Design. Mechanik, No. 12, 2015, pp. 1-5,
• [2] Adamski W.: Wybrane problemy projektowania i wytwarzania CAD/CAM w przemyśle maszynowym. Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów 2012.
• [3] Aramcharoen A., Chuan S.: An Experimental Investigation on Cryogenic Milling of Inconel 718 and Sustainability Assessment. 6th CIRP International Conference on High Performance Cutting, HPC 2014, Vol. 14, 2014, pp.529-534.
• [4] Bermingham M.J., Palanisamy S., Kent D., Dargusch M.S.: A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting. Journal of Materials Processing Technology, 212, 2012, pp, 752-765.
• [5] Bermingham M.J., Kirsch J., Sun S., Palanisamy S., Dargusch M.S.: New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V. International Journal Machine Toos &Manufacture, Vol. 51, 2011, pp. 500-511.
• [6] Campbell F.C.: Manufacturing Technology for Aerospace Structural Materials. Elsevier, 2006.
• [7] Courbon C., Kramar D., Krajnik P., Pusavec F., Rech J., Kopac J.: Investigation of machining performance in high-pressure jet assisted turning of Inconel 718: An experimental study. International Journal of Machine Tools and Manufacture, Vol. 49, No. 14, 2009, pp. 1114-1125.
• [8] Erdel B. P.: High-speed machining. Society of Manu facturing Engineers, 2013.
• [9] Ezugwu E.O.: Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools and Manufacture. Vol. 45, No. 12-13, 2005, pp. 1353-1367.
• [10] Ezugwu E.O., Bonney J. Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools. Journal of Materials Processing Technology, Vol 153-154, 2004, pp.1045-1050.
• [11] Józwik J., Tofil A.: Wybrane zagadnienia obróbki materiałów stosowanych w lotnictwie. Obróbka Metalu, No. 2, 2012.
• [12] Kuczmaszewski J., Zaleski K.: Obróbka skrawaniem stopów aluminium i magnezu. Politechnika Lubelska, 2015. [13] Lawal S., Choudhury I., Nukman Y.: A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant. Journal of Cleaner Production. 41, 2013, pp. 210-221.
• [13] Machai Ch., Biermann D.: Machining of β-titanium- alloy Ti-10V-2Fe-3Al udner cryogenic conditions: Cooling with carbon dioxide snow. Journal of Materials Processing Technology, Vol. 211, No. 6, 2011, pp. 1175-1183.
• [14] M’Saoubi R., Axinte D., Soo S. L., Nobel Ch., Attia H., Kappmeyer G., Engin S., Sim W-M.: High performance cutting advanced aerospace alloys and composite materials. CRIP Annals – Manufacturing Technology, 64, 2015, pp. 557-580.
• [15] Nandy A.K., Gowrishankar, Paul S.: Some studies on high-pressure cooling in turning of Ti-6Al-4V. International Journal of Machine Tools and Manufacture. Vol. 49, No. 2, 2009, pp. 182-198.
• [16] Palanisamy S., McDonald S.D., Dargusch S.: Effects of coolant pressure on chip formation while turning Ti6Al4V alloy. International Journal of Machine Tools & Manufacture, Vol. 49, 2009, pp. 4.
• [17] Palpandian P., Prabhu Raja V., Saish Babu S.: Stability Lobe Diagram for High Speed Machining Processes: Comparison of Experimental and Analytical Methods- A review. International Journal of Innovative Research in Science, Engineering and Techno- logy. Vol. 2, No. 3, March 2013.
• [18] Patel R., Ronjan A.: Advenced Techniques in Machining of Aerospace Superalloys: A Review. International Journal of Advance Research in Engineering, Science & Technology, Vol. 2, No. 5, 2015.
• [19] Pusavec F., Hamdi H., Kopac J., Jawahir I.S. Surface integrity in cryogenic machining of nickel based alloy- Inconel 718. Journal of Materials Processing Technology, Vol. 211, No. 4, 2011, pp. 773-783.
• [20[ Pusavec F., Kopac J.: Sustainability Assesment: Cryogenic Machining of Inconel 718. Strojniski Vestnik- Journal of Mechanical Engineering, Vol. 57, No. 9, 2011, pp.637-647.
• [21] Pusavec F., Stoić A., Kopac J.: The role of cryogenics in machining processes. Technical Gazette, Vol. 16, No. 4, 2009.
• [22] Richter A.: Cryogenic machining systems can extend tool life and reduce cycle times. Cutting Tool Engineering, Vol. 67, No. 2, 2015.
• [23] Stephenson D.A., Skerlos S.J., King A.S., Supekar S.D.: Rough turning Inconel 750 with supercritical CO2 - based minimum quantity lubrication. Journal of Materials Processing Technology, Vol. 214, 2014, 673-680.
• [24] Taczyński P., Wawrzonkowski M.: Nowoczesne rozwiązania konstrukcyjne w obszarze narzędzi sterowanych i mechatronicznych dedykowanych dla różnych gałęzi przemysłu. Mechanik, No 3, 2015.
• [25] Superstopy Żaroodporne. Przewodnik po zastosowaniach. Sandvik.
• [26] Ulutan D., Ozel T.: Machining induced surface integrity titanium and nickel alloys: A Review. International Journal of Machine Tools & Manufacture, 51, 2011, pp. 250-280.
• [27] Vagnorius Z., Sorby K.: Effect of high-pressurre cooling on life of SiAlON tools in machining of Inconel 718. International Journal of Advanced Manufacturing Technology, Vol. 54, 2011, pp. 83-92.
• [28] Venugopal K.A., Paul S., Chattopadhayay A.B.: Tool - wear in cryogenic turning of Ti-6Al-4V alloy. Cryogenics, Vol.47, 2007, pp. 12-18.
• [29] Yildiz Y., Nalbant M.: A review of cryogenic cooling in machining processes. International Journal of Machine Tools and Manufacture, Vol. 48, No. 9, 2008, pp. 947-964.
• [30] http://www.apx.pl/files/339035012/img/obrobka_wieloosiowa.jpg (14.12.2015).
• [31] http://www.mmsonline.com/articles/targeted-five-axis-machining (14.12.2015).
• [32] http://www.aeronamic.com/wp-content/uploads/2010/06/Impeller-1.jpg (14.12.2015).
• [33] http://www.mapal.com/uploads/tx_templavoila/mech_aussteuer_gruppe_Kopie_06.jpg (14.12.2015)
• [34] http://www.norstl.com/wp-content/uploads/2014/01/titanium-landing-gear-300x300.jpg (14.12.2015).
• [35] https://tmstitanium.com/wp-content/uploads/Titanium_Aerospace-650x394.jpg
• [36] http://shopmetaltech.com/images/articles-2014/articles_2015/5ME_Cryo_HighFeedMill2.jpg (14.12.2015).
• [37] http://www.sec.gov/Archives/edgar/data/814250/000095012310110284/l41250l41250z0010.gif (14.12.2015).
• [38] http://www.cadblog.pl/CADblog_wszystko_o_CAM_2012.htm (14.12.2015).
• [40] http://www.ith.fi/perch/resources/ultraflex-brochure.pdf (14.12.2015).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).