Effect of Surface Treatments on Cast-Bonding Characteristics of Steel-Aluminum Hybrid Composite Materials

• Autorzy: Kim Hyo-Jung , Kim Tae Hyeong , Shin Je Sik , Park Seung Yeon , Hyun Soongkeun , Lim Kyoung Mook

Identyfikatory

DOI

10.24425/amm.2019.129467

• Języki publikacji: EN

Abstrakty

EN

In this study, we investigated the bonding mechanism of surface-treated steel with an Al-Si alloy in order to produce steel-aluminum (STL-Al) hybrid composite materials by cast-bonding. The results showed that there are differences in the phase and properties of the hybrid composite materials bonded specimens depending on the surface treatment of the steel sheet used, and that the bonding conditions can be controlled further by detailed conditions of the surface treatment. Based on the interfacial bonding strengths measured here, the galvanized surface treatment induced metallurgical bonding to form a reaction layer on the bonding surface and was determined to be the most effective surface treatment.

Słowa kluczowe

EN

cast-bonding; aluminum; steel sheet; composite material; bonding surface

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 889--892
• Opis fizyczny: Bibliogr. 10 poz., fot., rys., tab.

Twórcy

autor

Kim Hyo-Jung

• Korea Institute of Industrial Technology, Korea Institute for Rare Metal, 12 Gaetbeol Rd., Yeonsu-gu, Incheon, 21999, Korea
• Inha University, Incheon, Korea

autor

Kim Tae Hyeong

• Korea Institute of Industrial Technology, Korea Institute for Rare Metal, 12 Gaetbeol Rd., Yeonsu-gu, Incheon, 21999, Korea

autor

Shin Je Sik

• Korea Institute of Industrial Technology, Korea Institute for Rare Metal, 12 Gaetbeol Rd., Yeonsu-gu, Incheon, 21999, Korea

autor

Park Seung Yeon

• Korea Institute of Industrial Technology, Korea Institute for Rare Metal, 12 Gaetbeol Rd., Yeonsu-gu, Incheon, 21999, Korea

autor

Hyun Soongkeun

• Inha University, Incheon, Korea

autor

Lim Kyoung Mook

• Korea Institute of Industrial Technology, Korea Institute for Rare Metal, 12 Gaetbeol Rd., Yeonsu-gu, Incheon, 21999, Korea

Bibliografia

• [1] L. Y. Sheng, Composites Part B: Engineering 42, 6, 1468-1473 (2011).
• [2] A. Bouayad, JARME 1, 4, 226-231 (2010).
• [3] H. Springer, Materials Science and Engineering A 528, 1-2, 4630-4642 (2011).
• [4] Wei-Jen Cheng, Intermetallics 19, 10, 1455-1460 (2011).
• [5] F. A. Calvo, Journal of Materials Science 23, 2273-2280 (1988).
• [6] Jun-Kai Chang, Metallurgical and Materials Transactions A 49, 8, 3715-3728, (2018).
• [7] S. Kobayashi, Materials Science and Engineering A 338(2002).
• [8] W. Jiang, Journal of Alloys and Compounds 742-751 (2016).
• [9] S. M. Kang, K. S. Han, D. G. Kim, ISIJ International 52, 7, 1342-1347 (2012).
• [10] W. Fragner, B. Zberg, R. Sonnleitner, P. Uggowitzer, Materials Science Forum, 519-521, 1157-1162 (2006).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).