Metrology risk of product quality at manufacturing stage

• Autorzy: Mykyychuk M , Stolyarchuk P.
• Języki publikacji: EN

Abstrakty

EN

The article shows that an effective tool of minimization of losses from non-probability measurements AT the stage of production is the use of risk management system. The expediency of evaluation of metrology risk of quality of products on the manufacturing stage in a kind of the generalized relative index - index of metrology risk - was grounded. This index must represent the loss of efficiency and effectiveness of the system of production metrology provision. The expressions for the estimation of the metrological risk index were offered and methodology of ranking production by the level of metrology risk was developed.

Słowa kluczowe

EN

metrology risk; quality; metrology provision; efficiency; effectiveness

• Wydawca: Polish Academy of Sciences, Branch in Lublin
• Czasopismo: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
• Rocznik: 2013
• Tom: Vol. 2, No 1
• Strony: 39--42
• Opis fizyczny: Bibliogr. 20 poz., tab.

Twórcy

autor

Mykyychuk M

• “Lviv Politechnic” of National University, Ukraine, Lviv

autor

Stolyarchuk P.

• “Lviv Politechnic” of National University, Ukraine, Lviv

Bibliografia

• 1. Markov B.F. 2008. The main directions of development of the State metrolohycheskoy system. / B.F.Markov, H.S.Sydorenko / / Ukrainian Metrology magazine. № 3. 7-11.
• 2. Dunayev B.B. 1981. Measurement accuracy for quality control / B.B. Dunayev / / K.: Tehnіka. 152.
• 3. Gray V.I. 2009. The quality and effectiveness of metrological provision of facilities and services Sveti / V.I.Seryh, L.V.Grebtsova, EI Chernyshevskaya / / Infosphere. № 44. 66 - 69.
• 4. Lisin S.K. 2007. Postoperative evaluation of the reliability of the results of quality control of industrial products / S.K Lisin / / Measuring equipment. № 8. 18.
• 5. Nazarov N.G. 2007. The method of creating the optima control plan the party based on a random sample of the serial / N.G Nazarov, A. Popov / / Measuring tehnika. № 10. 12-14.
• 6. Danylevych S.B. 2007. Metrolohycheskoe Securing production and quality of products / S. Danylevych, S. Kolesnikov / / Legislature and Applied Metrology. № 2. 6-9.
• 7. Mykyychuk M.M. 2011. Metrological risks of quality control at the manufacturing stage. Methods and devices QA / M.M Mykyychuk / / Scientifi c and technical journal Ivano-Frankivsk National Technical University of Oil and Gas. № 26. 120-123.
• 8. Dictionary of Psychology [electronic resource] – Access mode to the dictionary: http://www.slovarik.kiev.ua/ psychology/r/123726.html.
• 9. Economics and Mathematics dictionary [electronic resource] / L. Lopatnikov - 2003 - Mode of access to the dictionary: http://slovari.yandex.ru/dict/lopatnikov.
• 10. On the question of the defi nition of “risk” [electronic resource] / V.V.Indeeva / / SMU them. Acad. Pavlov, Ryazan. Russia. Mode of access to the article: http://www.rae.ru/zk/arj/2007/02/indeeva.pdf.
• 11. Serіya «Ekologіchna BEZPEKA» Ekologіchna BEZPEKA Ukrainy [electronic resource] AB Kachinsky - 2001. - Rozdil 3 / / Analіz riziku - metodologіchna basis for rozv'yazannya BEZPEKA Person of problems that dovkіllya - Mode of access: http://www.niss.gov.ua/book/ Kachin/1-3.htm.
• 12. GOST R 51897-2002 Risk Management. Terms and defi nitions. Access mode: http://sklad-zakonov.ru/gost/Gr51897-2002.htm.
• 13. ISO / IEC Guide 73:2002. Risk management – Vocabulary - Guidelines for use in standards.
• 14. Pronenko V.I. 1979. Metrology in industry / V.I Pronenko, R.V Yakyryn / / Technology. 223.
• 15. EN ISO 9001:2008 Quality Management System. Requirements. - Enter. in effect 04/01/2009. K. Standard. 2009. 39.
• 16. State system for ensuring the uniformity of measurements. Ensuring the effi ciency measurements for process control. Key points: MI 2233-2000. - Moscow: Publishing House of Standards - 2000. – 19 p.
• 17. Vitlinskyy V.V. and Velykoivanenko G.I. 2004. And risk in the economy and entrepreneurship: Monograph. K.: MBK. 480.
• 18. BS ISO 10012:2005 Requirements for measurement processes and measuring equipment. - Enter. in effect 01/01/2006. K. Standard. 2006. 39.
• 19. GOST R 51901.1-2002. Risk management. Risk analysis of technological systems. Moscow: Publishing House of Standards. 2002. 40.
• 20. M. Lut. 2012. Measuring equipment and software products in vibrodiagnostics / M. Lut, A. Mrachkovskyy, V. Taran // ECONTECHMOD. An international quarterly journal on economics in technology, new Technologies and modelling processes. Vol. I, No 1. 67