Shaping of Panel Materials in Light Direction Design

• Autorzy: Urzędowski A. , Wójcicka-Migasiuk D.

Identyfikatory

DOI

10.1515/amm-2016-0160

• Języki publikacji: EN

Abstrakty

EN

Abstract The paper presents the methodology of the analysis of the materials used in solar energy conversion, and an elaborated example with simulations of obtained results. Material properties are selected in relation to the need of sunlight illumination applications in civil constructions. This process is presented , starting from the analysis of some aspects of solar radiation, through the calculations of lens curvature and leading to the execution of simulations in different conditions. Graphical presentation of the phenomenon, it can visualize the process of shaping curves. The materials such as glass, polymers, metals, and gases have been discussed. Particular attention was paid to the results of the transmission of materials, their reflection and absorption of solar radiation. Moreover, the research problems of illumination and reflection in multi-layer structures used for civil constructions have been presented.

Słowa kluczowe

EN

reflective materials; illumination channels; surface shaping; reflection; non-imaging optics

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 941--945
• Opis fizyczny: Bibliogr. 5 poz. rys., wykr., wzory

Twórcy

autor

Urzędowski A.

• Department of Fundamental of Technology, Fundamentals of Technology Faculty Lublin University of Technology, 38 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Wójcicka-Migasiuk D.

• Department of Fundamental of Technology, Fundamentals of Technology Faculty Lublin University of Technology, 38 Nadbystrzycka Str., 20-618 Lublin, Poland

Bibliografia

• [1] D. Wójcicka-Migasiuk, The use of solar energy is the challenge for material research. (in Polish), Postępy Nauki i Techniki 5, 114-124 (2003).
• [2] K. Domke, Optical reflection modeling (in Polish). Wyd. Politechniki Poznańskiej, Poznań 2012.
• [3] L. A. Dobrzański, Material and metal science fundamentals (in Polish) Wyd. Naukowo-Techniczne, Warszawa 2002.
• [4] Y. T. Chen, T. H. Ho, Design method of non-imaging secondary (NIS) for CPV usage, Solar Energy 93, 32-42 (2013).
• [5] R. Winston, J. C. Mianano, P. G. Benitez, Nonimaging Optics. Academic Press, London 2005.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę