Influence of laser texturing on tribological properties of DLC coatings

• Autorzy: Radek Norbert , Tokar Dorota , Kalinowski Artur , Pietraszek Jacek

Identyfikatory

DOI

10.30657/pea.2021.27.15

• Języki publikacji: EN

Abstrakty

EN

The work presents the use of laser texturing of DLC coatings to improve tribological properties. The coatings were applied by the PVD method to the rings made of 4H13 steel. The surface texturing was = 343 nm.performed with the TruMICRO 5325c picosecond laser with the radiation wavelength The surface microstructure analysis, surface microgeometry and microhardness measurements and tribological tests were carried out. The problem presented in the paper can be used to extend the knowledge of the areas of application of DLC coatings, especially in sliding friction pairs.

Słowa kluczowe

EN

DLC; laser texturing; coatings; tribological properties; graphite

PL

DLC; laserowe teksturowanie; powłoki; właściwości tribologiczne; grafit

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2021
• Tom: Vol. 27, Iss. 2
• Strony: 119--123
• Opis fizyczny: Bibliogr. 35 poz., rys., tab.

Twórcy

autor

Radek Norbert

• Kielce University of Technology, 1000-lecia P.P. 7 str., 25-314 Kielce, Poland

autor

Tokar Dorota

• Graduate of the Kielce University of Technology, al. 1000-lecia P.P. 7, 25-314 Kielce, Poland

autor

Kalinowski Artur

• Kielce University of Technology, 1000-lecia P.P. 7 str., 25-314 Kielce, Poland

autor

Pietraszek Jacek

• Cracow University of Technology, 31-864 Kraków, Jana Pawła II 37 str., Poland

Bibliografia

• 1. Antoszewski, B., 2010. Textured surface layers-shaping with selected beam technologies and tribological properties, Wydawnictwo Politechniki Świętokrzyskiej, Kielce.
• 2. Bochenek, D., Niemiec, P., Korzekwa, J., Durtka, B., Stokłosa, Z., 2018. Microstructure and properties of the ferroelectric-ferromagnetic PLZTferrite composites, Symmetry, 10, art. 59, DOI: 10.3390/sym10030059
• 3. Chatys, R., Orman, Ł.J., 2017. Technology and properties of layered composites as coatings for heat transfer enhancement, Mechanics of Composite Materials, 53, 351-360, DOI: 10.1007/s11029-017-9666-8
• 4. Dudek, A., Wlodarczyk, R., 2010. Structure and properties of bioceramics layers used for implant coatings, Solid State Phenomena, 165, 31-36, DOI: 10.4028/www.scientific.net/SSP.165.31
• 5. Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobȩdza, J., 2017. The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model, METAL 2017 26th Int. Conf. on Metallurgy and Materials, Ostrava, Tanger, 1252-1257.
• 6. Esteve, J., Polo, M.C., Sanchez, G., 1999. Diamond and diamond-like carbon films, Vacuum, 52, 133-139,
• 7. Galindo, H., Prieto, P., Rincon, C., Sanchez, N.A, Zambrano, G., 2000. Characterization of diamond-like carbon (DLC) thin films prepared by R.F. magnetron sputtering, Thin Solid Films, 373, 247-250.
• 8. Korzekwa, J., Bara, M., Pietraszek, J., Pawlus, P., 2016. Tribological behaviour of Al2O3/inorganic fullerene-like WS2 composite layer sliding against plastic, International Journal of Surface Science and Engineering, 10, 570-584, DOI: 10.1504/IJSURFSE.2016.081035
• 9. Korzekwa, J., Gądek-Moszczak, A., Zubko, M., 2018. Influence of the Size of Nanoparticles on the Microstructure of Oxide Coatings, Materials Science, 53, 709-716, DOI: 10.1007/s11003-018-0127-x
• 10. Lipiński, T., 2015a. Influence of surface refinement on microstructure of AlSi cast alloys processed by welding method, Manufacturing Technology, 15, 576-581.
• 11. Lipiński, T., 2015b. Modification of Al-11% Si alloy with Cl-based modifier, Manufacturing Technology, 15, 581-587.
• 12. Lipiński, T., 2017. Corrosion effect of 20% NaCl solution on basic carbon structural S235JR steel, Engineering for Rural Development, 16, 1069- 1074, DOI: 10.22616/ERDev2017.16.N225
• 13. Lipiński, T., Karpisz, D., 2020a. Effect of animal slurry on carbon structural s235jr steel at 318 K, METAL 2020 29th Int. Conf. on Metallurgy and Materials, Ostrava, Tanger, 643-648, DOI: 10.37904/metal.2020.3569
• 14. Lipiński, T., Karpisz, D., 2020b. Effect of modification time on microstructure and tensile strength AlSi9Mg alloy with Sr, Ti and B additions using in agricultural machinery, Engineering for Rural Development, 19, 1476-1481, DOI: 10.22616/ERDev2020.19.TF367
• 15. Lipiński, T., Karpisz, D., 2020c. Effect of NaNO3, NaClO3 and TiO2 on mechanical properties AlSi7Mg alloy, METAL 2020 29th Int. Conf. on Metallurgy and Mate-rials, Ostrava, Tanger, 886-891, DOI: 10.37904/metal.2020.3627
• 16. Lipiński, T., Wach, A., Karpisz, D., 2020. Influence the non-metallic inclusions on bending fatigue strength of medium-carbon structural steel melted in an electric furnace, METAL 2020 29th Int. Conf. on Metallurgy and Materials, Ostrava, Tanger, 25-30, DOI: 10.30657/pea.2020.26.18
• 17. Madej, M., 2013. Properties of tribological systems with diamond-like coatings, Wydawnictwo Politechniki Świętokrzyskiej, Kielce.
• 18. Madej, M., 2014. The effect of TiN and CrN interlayers on the tribological behavior of DLC coatings, Wear, 317, 179-187.
• 19. Majewski, G., Telejko, M., Orman, Ł.J., 2017. Preliminary results of thermal comfort analysis in selected buildings, E3S Web of Conferences, 17, art. 00056, DOI: 10.1051/e3sconf/20171700056
• 20. Mansano, R.D., Mousinho, A.P., Salvadori, M.C., 2010. Nanostructured diamond-like carbon films characterization, Journal of Alloys and Compounds, 495, 620-624.
• 21. Orman, L.J., 2014. Boiling heat transfer on single phosphor bronze and copper mesh microstructures, EPJ Web of Conferences, 67, art. 2087, DOI: 10.1051/epjconf/20146702087
• 22. Ozimina, D., Madej M., Kowalczyk J., Suchanek J., Taticek F., Kolariikova M., 2012. Wear of diamond-like coatings depending on the type of coating composition and materials of the rubbing pair. Tribiologia, 3, 127- 136.
• 23. Pacana A., Czerwińska K., Dwornicka R., 2019. Analysis of non-compliance for the cast of the industrial robot basis. METAL 2019 28th Int. Conf. on Metallurgy and Mate-rials, Ostrava, Tanger, 664-650.
• 24. Pietraszek J., Dwornicka R., Szczotok A., 2016. The bootstrap approach to the statistical significance of parameters in the fixed effects model. ECCOMAS Congress 2016 – Proc. 7th European Congress on Computational Methods in Applied Sciences and Engineering, 3, 6061-6068, DOI: 10.7712/100016.2240.9206
• 25. Pietraszek, J., Goroshko, A., 2014. The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome, Advanced Materials Research, 874, 145-149, DOI: 10.4028/www.scientific.net/AMR.874.145
• 26. Pliszka, I., Radek, N., 2017. Corrosion Resistance of WC-Cu Coatings Produced by Electrospark Deposition, Procedia Engineering, 192, 707-712.
• 27. Radzyminska-Lenarcik E., Ulewicz R., Ulewicz M., 2018. Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole, Desalination and Water Treatment, 102, 211-219, DOI: 10.5004/dwt.2018.21826
• 28. Ryk G., Klingerman Y., Etsion I., 2002. Experimental investigation of laser surface texturing for reciprocating automotive components, Tribology Transactions, 45, 444-449.
• 29. Skrzypczak-Pietraszek, E., 2015. Phytochemistry and biotechnology approaches of the genus Exacum, In: Rybczyński J., Davey M., Mikuła A. (eds) The Gentianaceae – Vol. 2: Biotechnology and Applications, Springer, Berlin, Heidelberg, 383-401, DOI: 10.1007/978-3-642-54102- 5_16
• 30. Szala, M., Dudek, A., Maruszczyk, A., Walczak, M., Chmiel, J., Kowal, M., 2019. Effect of atmospheric plasma sprayed TiO2–10% NiAl cermet coating thickness on cavitation erosion, sliding and abrasive wear resistance, Acta Physica Polonica A, 136, 335-341, DOI: 10.12693/APhysPolA.136.335
• 31. Tokar, D., 2019. Evaluation of the properties of laser textured DLC coatings, Master’s thesis, Kielce.
• 32. Trzewiczek, K., Szczotok, A., Gadek-Moszczak, A., 2014. Evaluation of the state for the material of the live steam superheater pipe coils of V degree, Advanced Materials Research, 874, 35-42, DOI: 10.4028/www.scientific.net/AMR.874.3
• 33. Ulewicz, R., 2014. Application of servqual method for evaluation of quality of educational services at the university of higher education, Polish Journal of Management Studies, 9, 254-264.
• 34. Ulewicz, R., Nový, F., Selejdak, J., 2014. Fatigue strength of ductile iron in ultra-high cycle regime, Advanced Materials Research, 874, 43-48, DOI: 10.4028/www.scientific.net/AMR.874.43
• 35. Wojnar, L., Gadek-Moszczak, A., Pietraszek, J., 2019. On the role of histomorphometric (stereological) microstructure parameters inthe prediction of vertebrae compression strength, Image Analysis and Stereology, 38, 63-73, DOI: 10.5566/ias.2028

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).