Carbon fiber reinforced polymer and tensegrity structures in search of model architectural and engineering solutions

Franta, Anna; Zając, Dawid

doi:10.37705/TechTrans/e20220137

Artykuł - szczegóły

Tytuł artykułu

Carbon fiber reinforced polymer and tensegrity structures in search of model architectural and engineering solutions

Autorzy

Franta Anna , Zając Dawid

Wybrane pełne teksty z tego czasopisma

Identyfikatory

DOI

10.37705/TechTrans/e20220137

Warianty tytułu

Języki publikacji

Abstrakty

The current era of nanomaterials brings advancements in science and technology. This creates new solutions and possibilities in the creation of novel spatial structures. This study leads through the presentation of iconic architectural objects created with the use of high strength composite materials and tensegrity structure. Then presents the design process, numerical simulations of the three-way tensegrity grid prototype module. Static stress simulations were done within the simulation engine of the Fusion 360 software. Moreover, 1:1 scale prototype was developed. It could be used as a modular construction slab of a novel architectural design. One of the key characteristic features of high strength composite materials, high strength-to-weight ratio, combined with tensegrity structures allows to develop lightweight and hence very durable spatial structures. This gives tensegrity structures a very low dead load value as compared to traditional reinforced concrete structures. Thanks to the application of high strength and hence lightweight materials, the dead load of the prototype is only 0,18 kN/m².

Słowa kluczowe

architecture carbon fiber reinforced plastics CFRP composite materials lightweight structures tensegrity static stress simulation

architektura tworzywa sztuczne wzmocnione włóknem węglowym CFRP materiały kompozytowe konstrukcja lekka

Wydawca

Wydawnictwo Politechniki Krakowskiej im. Tadeusza Kościuszki

Czasopismo

Technical Transactions

Rocznik

2022

Tom

Vol. 119, iss. 1

Strony

art. no. e2022013

Opis fizyczny

Bibliogr. 48 poz., il., tab.

Twórcy

autor

Franta Anna

studio_ut@pk.edu.pl

Faculty of Architecture, Cracow University of Technology

https://orcid.org/0000-0001-6351-8622

autor

Zając Dawid

dawid.zajac@pk.edu.pl

Faculty of Architecture, Cracow University of Technology

https://orcid.org/0000-0002-8306-4450

Bibliografia

1. Adriaenssens, S., Block, P., Veenendaal, D. & Williams, C.J.K. (2014). Shell structures for architecture: form finding and optimization. London, England: Routledge.
2. Ashby, M.F., Ferreira, P.J. & Schodek, D.L. (2009). Nanomaterials, nanotechnologies and design: An introduction for engineers and architects. Amsterdam, Netherlands: Butterworth-Heinemann.
3. Bacon, R. (1960). U.S. Patent No. US2957756A. Filamentary graphite and method for producing the same. Washington, DC: U.S. Patent and Trademark Office.
4. Bakis, C.E., Bank, L.C., Brown, V.L., Cosenza, E., Davalos, J.F., Lesko, J.J., Machida, A., Rizkalla, S.H., Triantafillou, T.C. (2002). Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review. Journal of Composites for Construction, 6(2). https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(73)
5. Bank L. C. (2006). Composites for construction: Structural Design with FRP Materials. USA: Wiley.
6. Burdett, R., Cook, P. & Rogers, R. (1996). Richard Rogers Partnership: Works and projects. New York, US: The Monacelli Press.
7. Cheung, K.C. & Gershenfeld, N. (2013). Reversibly Assembled Cellular Composite Materials. Science, 341(6151), 1219–1221. http://dx.doi.org/10.1126/science.1240889
8. Columbia (n.d.). Olympic fencing and gymnastics arenas. Retrieved from: http://www.columbia.edu/cu/gsapp/BT/DOMES/SEOUL/images.html (access: 2022/11/29).
9. Corbusier, L. (2012). W strone architektury (Vers une architecture). Warszawa, Poland: Fundacja Centrum Architektury.
10. Cramer, N.B., Cellucci, D.W., Formoso, O.B., Gregg, C.E., Jenett, B.E., Kim, J.H., Cheung, K.C. (2019). Elastic shape morphing of ultralight structures by programmable assembly. Smart Materials and Structures, 28(5), 055006. https://doi.org/10.1088/1361-665X/ab0ea2
11. Dörstelmann, M., Knippers, J., Menges, A., Parascho, S., Prado, M. & Schwinn, T. (2015). ICD/ITKE Research Pavilion 2013–14: Modular Coreless Filament Winding Based on Beetle Elytra. Architectural Design, 85(5), 54–59. https://doi.org/10.1002/ad.1954
12. Dörstelmann, M., Knippers, J., Koslowski, V., Menges, A., Prado, M., Schieber, G. & Vasey, L. (2015). ICD/ITKE Research Pavilion 2014–15: Fibre Placement on a Pneumatic Body Based on a Water Spider Web. Architectural Design, 85(5), 60–65. https://doi.org/10.1002/ad.1955
13. Dong, L. & Wadley, H. (2015). Mechanical properties of carbon fiber composite octet-truss lattice structures. Composites Science and Technology, 119, 26–33. https://doi.org/10.1016/j.compscitech.2015.09.022
14. Emmerich D.G. (1988). Structures Tendues et Autotendantes. Paris, France: Edition del’Ecole d’Architecture de Paris La Vilette.
15. Felbrich B., Früh N., Prado M., Saffarian S., Solly J., Vasey L., Knippers J. & Menges A. (2017). Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long-Span Composite Structures. In ACADIA 2017: Disciplines + Disruption, Boston, USA, October.
16. Fest, E., Shea, K., Domer, B., Smith, I. F. C. (2003). Adjustable Tensegrity Structures. Journal of Structural Engineering, 129(4). https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(515)
17. Franta, A. (2019). Myths and Realities of Adaptable city. Contemporary City as Adaptable Hybrid. IOP Conference Series Materials Science and Engineering, 471(9). 1–10. https://doi.org/10.1088/1757-899X/471/9/092030
18. Fu, F. (2006). Non-linear static analysis and design of Tensegrity domes. Steel and Composite Structures, 6(5), 417-433. https://doi.org/10.12989/scs.2006.6.5.417
19. Gerardo Castro, M.ASCE & Matthys P. Levy, F.ASCE (June 7–9, 1992), Analysis of the Georgia Dome Cable Roof. In Proceedings of the Eighth Conference of Computing in Civil Engineering and Georgraphic Information Systems Symposium, ASCE, ed. by Barry J. Goodno & Jeff R. Wright. Dallas, TX.
20. Gough, M. (1998). In the Laboratory of Constructivism: Karl Ioganson’s Cold Structures. October, 84, 90–117. https://doi.org/10.2307/779210
21. Huu, T., Vo-Duy, D., Duong-Gia, D., & Nguyen-Thoi, T. (2018). An efficient procedure for lightweight optimal design of composite laminated beams. Steel and Composite Structures, 27(3), 297–310. http://dx.doi.org/10.12989/scs.2018.27.3.297
22. Ikebata, S. & Uzawa, K. (2018). Seismic Reinforcing Material for Important Cultural Properties! Innovative New Construction Material Developed. Japan Science and Technology Agency – Science and Technology for Society.
23. JEC Group. (2018). Construction and Infrastructure, CABKOMA CFRTP Strand Rod. JEC Innovation Awards 2018: 30 finalists exemplify the best composite innovation worldwide. Paris, France.
24. Kasprzak, A. (2014). Study on possible applications of tensegrity structures in bridge engineering. PhD thesis, Faculty of Civil Engineering Warsaw University of Technology, Warszawa.
25. Kayser, M., Cai, L., Falcone, S., Bader, C., Inglessis, N., Darweesh, B. & Oxman, N. (2018). FIBERBOTS: an autonomous swarm-based robotic system for digital fabrication of fiber-based composites. Construction Robotics, 2(1–4), 67–79. https://doi.org/10.1007/s41693-018-0013-y
26. Knippers, J., Magna, R. L., Menges, A., Reichert, S., Schwinn, T. & Waimer, F. (2015). ICD/ITKE Research Pavilion 2012: Coreless Filament Winding Based on the Morphological Principles of an Arthropod Exoskeleton. Architectural Design, 85(5), 48–53. https://doi.org/10.1002/ad.1953
27. KomatsumateRe (n.d.). Lightweight, Strong and Corrosion-free. Retrieved from: https://www.komatsumatere.co.jp/cabkoma/en/ (access: 2022/11/29).
28. Marks, R. & Fuller, R.B. (1973). The Dymaxion world of Buckminster Fuller. Garden City, New York, USA: Anchor Books.
29. McDonough, W. & Braungart, M. (2003). The Hannover principles: Design for sustainability. Charlottesville, VA, USA: William McDonough + Partners.
30. Melaragno, M. (1994). Tensegrity Structures: Filling the Gap Between Art and Science Spatial, lattice, and tension structures. In Proc., IASS-ASCE International Symposium 1994 on Spatial, Lattice and Tension Structures. Proceedings of the IASS-ASCE International Symposium 1994 on Spatial, Lattice and Tension Structures, 1994: 1024–1035.
31. Millington, R.B. & Nordberg, R.C. (1966). U.S. Patent No. US3294489A. Process for preparing carbon fibers. Washington, DC, USA: U.S. Patent and Trademark Office.
32. Morgan, M. & Warren, H. (1960). Vitruvius the ten books on architecture: With illustrations and original designs. NY, USA: Dover Publications.
33. Motro R. (2003). Tensegrity: Structural systems for the future. London, United Kingdom: Hermes Science Publishing Limited.
34. Motro. R. (2012). Tensegrity: from Art to Structural Engineering. In 2012 IASS-APCS Symposium, May 2012, Séoul, South Korea. 14, p. hal-00857410.
35. Overstreet, K. (2016). Kengo Kuma Uses Carbon Fiber Strands to Protect Building from Earthquakes. Retrieved from https://www.archdaily.com/785175/komatsu-seiren-fabric-laboratory-creates-cabkoma-strand-rod-to-protect-building-from-ea(date of access: 2020/01/15).rthquakes (access: 2022/11/29).
36. Pelczarski, M. (2013). About shaping the structure of Katowice Spodek-arena roof. Considerations from interviews with Prof. W. Zalewski. ARCHITECTUS, 69–82. https://doi.org/10.5277/arc130205
37. Prado, M., Dörstelmann, M., Menges, A., Solly, J. & Knippers, J. (2017). Elytra Filament Pavilion. Fabricate 2017, 224–231. https://doi.org/10.2307/j.ctt1n7qkg7.35
38. Pugh, A. (1976). An Introduction to tensegrity. Berkeley, CA, USA: University of California Press.
39. Rastorfer D. (1988). Structural Gymnastics for the Olympics. Architectural Record, NY, USA: Columbia University.
40. Salinas, J. G. O., Mendoza, M., & Meza, E. G. (2018). Reflections on Frei Otto as Mentor and Promoter of Sustainable Architecture and his collaboration with Kenzo Tange & Ove Arup in 1969. Journal of the International Association for Shell and Spatial Structures, 59(1), 87–100. https://doi.org/10.20898/j.iass.2018.195.900
41. Snelson K. (1973). Tensegrity Masts. CA, USA: Shelter Publications, Bolinas.
42. Solomon Fortune (2016). Georgia dome's roof: tired but true. Retrieved from: http://sites.gsu.edu/sfortune3/2016/03/09/georgia-dome-digital-artifact-5/ (access: 2022/11/29).
43. Steve Jobs Theater: Foster Partners. Retrieved from https://www.fosterandpartners.com/projects/steve-jobs-theater/ (access: 2022/11/29).
44. Thermoplastic carbon fiber composite. Retrieved from https://www.komatsumatere.co.jp/cabkoma/en/ (access: 2022/11/29).
45. The Task Committee on Fiber-Reinforced Composite Structures for Overhead Lines of the Structural Engineering Institute of the ASCE. (2003). Recommended Practice for Fiber-Reinforced Polymer Products for Overhead Utility Line Structures. US: ASCE.
46. Lin, Y., Lafarie-Frenot, M. C., Bai, J. & Gigliotti, M. (2018). Numerical simulation of the thermoelectric behavior of CNTs/CFRP aircraft composite laminates. Advances in Aircraft and Spacecraft Science, 5(6), 633–652. http://dx.doi.org/10.12989/aas.2018.5.6.633
47. Wikimedia (2018). Kurilpa Bridge seen from William Jolly Bridge, Brisbane 01. Retrieved from: https://commons.wikimedia.org/wiki/File:Kurilpa_Bridge_seen_from_William_Jolly_Bridge,_Brisbane_01.jpg (access: 2022/11/29).
48. Zając, D. (2019). High-strength composite materials in design process of tensegrity structures. In Proc. The Seventh International Conference on Structural Engineering, Mechanics and Computation, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications (pp. 969–974). Cape Town, South Africa: CRC Press/Balkema.

Uwagi

Section "Architecture and Urban Planning"

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-ee5583fc-2995-481a-a49f-d59147faf3fe