PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Formation of Hard Composite Layer on Tool Steel by Laser Alloying

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Investigations include alloying the PMHSS6-5-3 steel surface layer with carbide and ceramic powders WC, VC, TiC, SiC, Si3N4 and Al2O3, using the high power diode laser (HPDL). Laser treatment is especially promising for solving contemporary surface engineering problems making it possible to focus precisely the delivered energy in the form of heat in the surface layer. The structural mechanism was determined of surface layers development, effect was studied of alloying parameters, method on structure refinement and influence of these factors on the mechanical properties of surface layer, and especially on its abrasive wear resistance. The fine grained martensite structure is responsible for hardness increase of the alloyed layer. The tribological wear relationships were determined for laser treated surface layers, determining friction coefficient, and wear trace shape developed due to the abrasive wear of the investigated surfaces. Comparison of the laser treatment parameters and tribological properties of surface layer after remelting and alloying with hard particles of the PMHSS6-5-3 steel using the high power diode laser to obtain the optimum service properties is the outcome of the investigations carried out.
Słowa kluczowe
Twórcy
autor
  • Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, 18a Konarskiego Str., 44-100 Gliwice, Poland
Bibliografia
  • [1] J. Mateos, J. M. Cuetos, E. Fernandez, R. Vijande, Wear. 239, 274-281 (2000).
  • [2] T. R. Jervis, Surf Coat Tech. 89, 158-164 (1997).
  • [3] J. Kusiński, Lasers and their employment in materials engineering, Publisher „Akapit”, Kraków, 2000, (in Polish)
  • [4] J. Kusiński, Appl Surf Sci. 86, 317-322 (1995).
  • [5] J. Kusiński, J Mater Process Tech. 64, 239-246 (1997).
  • [6] M. Bonek, G. Matula, L.A. Dobrzanski, Adv Mat Res. 291-294, 1365-1368 (2011).
  • [7] M. Bonek, L.A. Dobrzański, Mater Sci Forum, 654-656, 1848-1851 (2010).
  • [8] T. Tański, Materialwiss Werkst. 45, (5), 333-343 (2014).
  • [9] L. A. Dobrzański, D. Pakuła, Mater Sci Forum, 513, 119-133 (2006).
  • [10] M. C. Oh, H. Yeom, Y. Jeon, B. Ahn, Arch Metall Mater. 60, (2), 1331-1334 (2015).
  • [11] M. Krol, M. Bilewicz, J. C. Viana, L. A. Dobrzanski, Mater Sci Forum. 587-588, 553-557 (2008).
  • [12] G. Matula, L. A. Dobrzański, A. Várez, B. Levenfeld, J. M. Torralba, J Mater Process Tech. 162, 230-235 (2005).
  • [13] Z. Brytan, J. Niagaj, Chiang Mai J Sci. 40, (5), 923-937 (2013).
  • [14] N. Radek, J. Konstanty, Arch Metall Mater. 57, (3), 665-670 (2012).
  • [15] L. A. Dobrzański, D. Pakuła, J. Mikuła, K. Gołombek, Int. J. Surface Science and Engineering, 1 (1), 111-124 (2007).
  • [16] L. A. Dobrzański, D. Pakuła, Mater. Sci. Forum. 513, 119-133 (2006).
  • [17] S. Lesz, R. Szewczyk, D. Szewieczek, A. Bieńkowski, J Mater Process Tech. 157-158, 743-748 (2004).
  • [18] D. Szewieczek, S. Lesz, J Mater Process Tech. 162, 254-259 (2005).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ee2385b6-2769-40c4-b9ff-c88a69e1ca4d
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.