Used Furan Sand Reclamation in REGMAS Vibratory Unit

• Autorzy: Dańko J. , Dańko R. , Skrzyński M.

Identyfikatory

DOI

10.1515/afe-2015-0053

• Języki publikacji: EN

Abstrakty

EN

The paper, especially dealt with problems of reclamation of used furan sand, carried out in new, vibratory sand reclamation unit REGMAS developed by researches from AGH-University of Science and Technology, Faculty of Foundry Engineering in Cracow (Poland). Functional characteristics of reclamation unit as well as the results of reclamation of used sand with furfuryl resin are discussed in the paper. The quality of reclaim was tested by means of the LOI and pH value, dust content in the reclaim and at least by the the quality of the castings produced in moulds prepared with the use of reclaimed matrix.

Słowa kluczowe

EN

used sand; mechanical reclamation; environmental protection

PL

masa zużyta; regeneracja mechaniczna; ochrona środowiska

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 3
• Strony: 25--28
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Dańko J.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 str., 30-059 Kraków, Poland

autor

Dańko R.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 str., 30-059 Kraków, Poland

autor

Skrzyński M.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 str., 30-059 Kraków, Poland

Bibliografia

• [1] Dańko, J., Dańko, R., Łucarz, M. (2007). Processes and equipment for recovery of matrix of used moulding sands. Cracow: Scientific Publishers Akapit (in Polish).
• [2] Dańko, R. (2007). Development of energetic model for dry mechanical reclamation process of used foundry sands. International Journal of Cast Metals Research. 20(4), 228-232.
• [3] Integrated Pollution and Control (2005). Reference Document on Best Available Techniques in the Smitheries and Foundries Industry. European Commision, May 2005.
• [4] Dianjie, L., Linling, S., Dong, E. (2010). Reclamation process and equipment of used of self hardening sand. In 69th World Foundry Congress, 16-20 October 2010 (pp. 665-673). Hangzhou China.
• [5] Ignaszak, Z. (2011). Contribution to determination of the life time of chemically self-hardening mould sand. Archives of Foundry Engineering. 11(4), 55-60.
• [6] Tordoff, W.L., Miller, J. & Trembly, J. (1999). New development in sand reclamation. CIATF Technical Forum, 1999, (pp. 377-386).
• [7] Wang, J.N. & Fan, Z.T. (2010). Freezing-mechanical' reclamation of used sodium silicate sands. International Journal of Cast Metals Research. 23(5), 257-263.
• [8] Łucarz, M. (2014). Influence of the thermal reclamation of the spent core sand matrix on its reuse. Archives of Foundry Engineering. 14(spec. 1), 27-30.
• [9] Łucarz, M. (2013). Utilisation of the reclaim from the cold-box technology in the core sands production. Archives of Foundry Engineering. 13(spec.3), 107-112.
• [10] Design and development of a novel type of vibratory reclamation system using modern techniques for reclaiming spent moulding sands. Polish Innovative Optional Programme, No. WND-POIG.01.03.01-12-007/09.