Bond behavior of steel fiber-reinforced mortar (SFRM) applied onto masonry substrate

• Autorzy: Zampieri Paolo , Simoncello Nicolò , Libreros Jaime Gonzalez , Pellegrino Carlo

Identyfikatory

DOI

10.1007/s43452-020-00090-6

• Języki publikacji: EN

Abstrakty

EN

Masonry was the most used material during the last centuries to build constructions. Most of the existing masonry structures (buildings, bridges, etc.) were built without considering some important structural considerations that are important nowadays. Moreover, due to factors such as the increasing of service loads, materials aging, structural damage, etc., the existing masonry structures require strengthening interventions. The definition of optimal strengthening strategies using traditional and innovative materials is still an important issue of the scientific research. In fact, during the last decade, many researchers focused their attention studying innovative composites materials, such as fiber-reinforced polymers and fiber-reinforced cementitious matrix composites, for the strengthening of existing masonry structures. This research has focused on aspects such as the bond behavior between the substrate and the composite materials, the structural behavior of the strengthened masonry and concrete structures, and the compatibility and reversibility of these materials when bonded to existing substrates. In this study, the bond behavior of a composite material known as steel fiber-reinforced mortar (SFRM), recently used as for the strengthening of existing structures, applied onto masonry structures is analyzed experimentally and numerically. First, the material is characterized experimentally with the aim of getting insight on its behavior and applicability when applied as an innovative technique for the strengthening of masonry and to obtain mechanical parameters required for the numerical models. Mechanical properties of the SFRM studied included flexural and compressive strength, tensile strength, and residual flexural strength. The SFRM bond behavior on masonry substrates was evaluated by means of double shear lap tests. In addition, the experimental tensile and bond behavior of the SFRM is studied numerically through finite-element models validated using the results obtained during the experimental tests. Results show that if an adequate bonded length is provided, the SFRM can fully develop its tensile strength as detachment from the substrate is not observed.

Słowa kluczowe

EN

steel fibre reinforced mortar; SFRM; masonry; strengthening; mechanical characterization; bond behavior; tensile test; numerical modelling

PL

zaprawa zbrojona włóknami; próba rozciągania; modelowanie numeryczne

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2020
• Tom: Vol. 20, no. 3
• Strony: 409--428
• Opis fizyczny: Bibliogr. 54 poz., fot., rys., tab., wykr.

Twórcy

autor

Zampieri Paolo

• Department of Civil, Environmental and Architectural Engineering, University of Padua, Via Marzolo 9, 35131 Padua, Italy

autor

Simoncello Nicolò

• Department of Civil, Environmental and Architectural Engineering, University of Padua, Via Marzolo 9, 35131 Padua, Italy

autor

Libreros Jaime Gonzalez

• Department of Civil, Environmental and Architectural Engineering, University of Padua, Via Marzolo 9, 35131 Padua, Italy

autor

Pellegrino Carlo

• Department of Civil, Environmental and Architectural Engineering, University of Padua, Via Marzolo 9, 35131 Padua, Italy

Bibliografia

• [1] Gunes B, Cosgun T, Sayin B, Ceylan O. Structural rehabilitation of a middle byzantine ruin and the masonry building constructed above the ruin. Part II: the building. Eng Fail Anal. 2019;105:527–44. https ://doi.org/10.1016/j.engfa ilana l.2019.06.096.
• [2] Caporale A, Feo L, Luciano R. Limit analysis of FRP strengthened masonry arches via nonlinear and linear programming. Compos Part B. 2012;43(2):439–46. https ://doi.org/10.1016/j.compo sitesb.2011.05.019.
• [3] Capani F, D’Ambrisi A, De Stefano M, Focacci F, Luciano R, Nudo R, Penna R. Experimental investigation on cyclic response of RC elements repaired by CFRP external reinforcing systems. Compos Part B. 2017;112:290–9. https ://doi.org/10.1016/j.composites b.2016.12.053.
• [4] Caporale A, Feo L, Luciano R, Penna R. Numerical collapse load of multi-span masonry arch structures with FRP reinforcement. Compos Part B. 2013;54:71–84. https ://doi.org/10.1016/j.composites b.2013.04.042.
• [5] Carozzi FG, Poggi C, Bertolesi E, Milani G. Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: experimental evaluation. Compos Struct. 2018;187:466–80. https ://doi.org/10.1016/j.comps truct .2017.12.075.
• [6] Feo L, Luciano R, Misseri G, Rovero L. Irregular stone masonries: analysis and strengthening with glass fibre reinforced composites. Compos Part B. 2016;92:84–93. https ://doi.org/10.1016/j.compo sites b.2016.02.038.
• [7] Alecci V, Focacci F, Rovero L, Stipo G, De Stefano M. Intrados strengthening of brick masonry arches with different FRCM composites: experimental and analytical investigations. Compos Struct. 2017;176:898–909. https://doi.org/10.1016/j.compstruct.2017.06.023.
• [8] Alecci V, Misseri G, Rovero L, Stipo G, De Stefano M, Feo L, Luciano R. Experimental investigation on masonry arches strengthened with PBO-FRCM composite. Compos Part B. 2016;100:228–39. https ://doi.org/10.1016/j.compo sitesb.2016.05.063.
• [9] Greco F, Leonetti L, Luciano R, Trovalusci P. Multiscale failure analysis of periodic masonry structures with traditional and fiber-reinforced mortar joints. Compos Part B. 2017;118:75–95. https ://doi.org/10.1016/j.composites b.2017.03.004.
• [10] Misseri G, Rovero L, Stipo G, Barducci S, Alecci V, De Stefano M. Experimental and analytical investigations on sustainable and innovative strengthening systems for masonry arches. Compos Struct. 2019;210:526–37. https ://doi.org/10.1016/j.compstruct .2018.11.054.
• [11] Cevallos OA, Olivito RS, Codispoti R, Ombres L. Flax and polyparaphenylene benzobisoxazole cementitious composites for the strengthening of masonry elements subjected to eccentric loading. Compos Part B. 2015;71:82–95. https ://doi.org/10.1016/j.compo sites b.2014.10.055.
• [12] Oliveira DV, Basilio I, Lourenço PB. Experimental behav-ior of FRP strengthened masonry arches. J Compos Constr. 2010;14(3):312–22. https ://doi.org/10.1061/(ASCE)CC.1943-5614.00000 86.
• [13] Triantafillou TC, Papanicolaou CG. Shear strengthening of rein-forced concrete members with textile reinforced mortar (TRM) jackets. Mater Struct. 2006;39:93–103. https ://doi.org/10.1007/s1152 7-005-9034-3.
• [14] Garmendia L, San-José JT, García D, Larrinaga P. Rehabilitation of masonry arches with compatible advanced composite material. Constr Build Mater. 2011;25(12):4374–85. https ://doi.org/10.1016/j.conbu ildma t.2011.03.065.
• [15] Zampieri P, Simoncello N, Tetougueni CD, Pellegrino C. A review of methods for strengthening of masonry arches with composite materials. Eng Struct. 2018;171:154–69. https ://doi.org/10.1016/j.engst ruct.2018.05.070.
• [16] Tsonos ADG. A new method for earthquake strengthening of old R/C structures without the use of conventional reinforcement. Struct Eng Mech. 2014;52(2):391–403. https ://doi.org/10.12989/sem.2014.52.2.391.
• [17] Altun F, Haktanir T, Ari K. Effects of steel fiber addition on mechanical properties of concrete and RC beams. Constr Build Mater. 2007;21(3):654–61. https ://doi.org/10.1016/j.conbuildma t.2005.12.006.
• [18] Hassan AMT, Jones SW, Mahmud GH. Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC). Constr Build Mater. 2012;37:874–82. https ://doi.org/10.1016/j.conbu ildma t.2012.04.030.
• [19] Ţibea C, Bompa DV. Ultimate shear response of ultra-high-performance steel fibre-reinforced concrete elements. Arch Civ Mech Eng. 2020;20:49. https ://doi.org/10.1007/s4345 2-020-00051 -z.
• [20] Gholampour A, Hassanli R, Mills JE, Vincent T, Kunieda M. Experimental investigation of the performance of concrete columns strengthened with fiber reinforced concrete jacket. Constr Build Mater. 2019;194:51–61. https ://doi.org/10.1016/j.conbuildma t.2018.10.236.
• [21] Reggia A, Morbi A, Plizzari GA. Experimental study of a reinforced concrete bridge pier strengthened with HPFRC jacketing. Eng Struct. 2020;210:110355. https ://doi.org/10.1016/j.engstruct.2020.11035 5.
• [22] Facconi L, Minelli F, Lucchini S, Plizzari G. Experimental study of solid and hollow clay brick masonry walls retrofitted by steel fiber-reinforced mortar coating. J Earthq Eng. 2020;24(3):381–402. https ://doi.org/10.1080/13632 469.2018.14422 64.
• [23] Facconi L, Conforti A, Minelli F, Plizzari G. Improving shear strength of unreinforced masonry walls by nano-reinforced fibrous mortar coating. Mater Struct. 2015;48:2557–74. https ://doi.org/10.1617/s1152 7-014-0337-0.
• [24] Simoncello N, Zampieri P, Gonzalez-libreros J, Pellegrino C. Experimental behaviour of damaged masonry arches strengthened with steel fiber reinforced mortar (SFRM). Compos Part B. 2019;177:107386. https ://doi.org/10.1016/j.compo sitesb.2019.10738 6.
• [25] Sevil T, Baran M, Bilir T, Canbay E. Use of steel fiber reinforced mortar for seismic strengthening. Constr Build Mater. 2011;25(2):892–9. https ://doi.org/10.1016/j.conbu ildmat.2010.06.096.
• [26] Zhang Y, Zhu P, Liao Z, Wang L. Interfacial bond properties between normal strength concrete substrate and ultra-high performance concrete as a repair material. Constr Build Mater. 2020;235:117431. https ://doi.org/10.1016/j.conbu ildmat.2019.11743 1.
• [27] Abo Sabah SH, Zainal NL, Muhamad Bunnori N, Megat Johari MA, Hassan MH. Interfacial behavior between normal substrate and green ultra-high-performance fiber-reinforced concrete under elevated temperatures. Struct Concr. 2019;20:1896–908. https ://doi.org/10.1002/suco.20190 0152.
• [28] Zhanga Y, Zhanga C, Zhu Y, Cao J, Shao X. An experimental study: various influence factors affecting interfacial shear performance of UHPC-NSC. Constr Build Mater. 2020;236:117480. https ://doi.org/10.1016/j.conbu ildma t.2019.11748 0.
• [29] UNI EN 998-2_2016. Specification for mortar for Masory-part 2: masonry mortar.
• [30] UNI-EN 1015-11. Methods of test for mortar for Masory-determination of flexural and compressive strength of hardened mortar.
• [31] UNI EN 13412:2007. Products and systems for the protection and repair of concrete structures-test methods-determination of modulus of elasticity in compression.
• [32] BS EN 771-1:2011. Specification for masonry units-part 1: clay masonry units.
• [33] BS EN 1052-1:1999. Methods of test for Masory-part 1: deter-mination of compressive strength.
• [34] EN 1996-1 1 2005;1. Eurocode6. Structures G rules for reinforced and unreinforced masonry.
• [35] Thamboo J, Dhanasekar M. Correlation between the performance of solid masonry prisms and wallettes under compression. J Build Eng. 2019;22:429–38. https ://doi.org/10.1016/j.jobe.2019.01.007.
• [36] BS EN 14651:2005. Test method for metallic fibre concrete-measuring the flexural tensile strength (limit of proportionality (LOP), residual).
• [37] CNR-DT 204/2006. Istruzioni per la Progettazione, l’Esecuzione ed il Controllo di Strutture di Calcestruzzo Fibrorinforzato.
• [38] Xu BW, Shi HS. Correlations among mechanical properties of steel fiber reinforced concrete. Constr Build Mater. 2009;23(12):3468–74. https ://doi.org/10.1016/j.conbu ildmat.2009.08.017.
• [39] Yoo DY, Banthia N, Yoon YS. Predicting the flexural behavior of ultra-high-performance fiber-reinforced concrete. Cem Concr Compos. 2016;74:71–87. https ://doi.org/10.1016/j.cemco ncomp.2016.09.005.
• [40] Mukhtar FM, Faysal RM. A review of test methods for studying the FRP-concrete interfacial bond behavior. Constr Build Mater. 2018;169:877–87. https ://doi.org/10.1016/j.conbu ildmat.2018.02.163.
• [41] Hadigheh SA, Gravina RJ, Setunge S. Identification of the interfacial fracture mechanism in the FRP laminated substrates using a modified single lap shear test. Eng Fract Mech. 2015;134:317–29. https ://doi.org/10.1016/j.engfr acmec h.2014.12.001.
• [42] Falope FO, Lanzoni L, Tarantino AM. Double lap shear test on steel fabric reinforced cementitious matrix (SFRCM). Compos Struct. 2018;201:503–13. https ://doi.org/10.1016/j.comps truct.2018.06.001.
• [43] D’Antino T, Sneed LH, Carloni C, Pellegrino C. Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints. Compos Struct. 2016;142:117–29. https://doi.org/10.1016/j.comps truct .2016.01.076.
• [44] Sneed LH, D’Antino T, Carloni C, Pellegrino C. A comparison of the bond behavior of PBO-FRCM composites determined by double-lap and single-lap shear tests. Cem Concr Com-pos. 2015;64:37–48. https ://doi.org/10.1016/j.cemco ncomp.2015.07.007.
• [45] Bertolesi E, Milani G, Fagone M, Rotunno T, Grande E. Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests. Compos Struct. 2018;201:916–31. https ://doi.org/10.1016/j.comps truct.2018.06.111.
• [46] Rotunno T, Fagone M, Bertolesi E, Grande E, Milani G. Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips. Compos Struct. 2018;200:434–48. https ://doi.org/10.1016/j.comps truct .2018.05.097.
• [47] de Carvalho Bello CD, Boem I, Cecchi A, Gattesco N, Oliveira DV. Experimental tests for the characterization of sisal fiber reinforced cementitious matrix for strengthening masonry structures. Constr Build Mater. 2019;219:44–55. https ://doi.org/10.1016/j.conbu ildma t.2019.05.168.
• [48] Ombres L, Iorfida A, Mazzuca S, Verre S. Bond analysis of thermally conditioned FRCM-masonry joints. Measurement. 2018;125:509–15. https ://doi.org/10.1016/j.measu rement.2018.05.021.
• [49] Franzoni E, Gentilini C, Santandrea M, Carloni C. Effects of rising damp and salt crystallization cycles in FRCM-masonry interfacial debonding: towards an accelerated laboratory test method. Constr Build Mater. 2018;175:225–38. https ://doi.org/10.1016/j.conbuildma t.2018.04.164.
• [50] Barbat GB, Cervera M, Chiumenti M, Espinoza E. Structural size effect: experimental, theoretical and accurate computational assessment. Eng Struct. 2020. https ://doi.org/10.1016/j.engstruct.2020.11055 5.
• [51] Popovics S. A numerical approach to the complete stress-strain curve of concrete. Cem Concr Res. 1973;3(5):583–99. https ://doi.org/10.1016/0008-8846(73)90096 -3.
• [52] CNR-DT 200 R1/2013. Istruzioni per la Progettazione, l’Esecuzione ed il Controllo di Interventi di Consolidamento Statico mediante l’utilizzo di Compositi Fibrorinforzati.
• [53] Ghiassi B, Marcari G, Oliveira DV, Lourenço PB. Numerical analysis of bond behavior between masonry bricks and composite materials. Eng Struct. 2012;43:210–20. https ://doi.org/10.1016/j.engst ruct.2012.05.022.
• [54] Vecchio FJ, Collins MP. Modified compression-field theory for reinforced concrete elements subjected to shear. J Am Concr Inst. 1986;83:219–31.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021)