The influence of edge defects on the lifetime of wood machining tools

• Autorzy: Barlak M. , Werner Z. , Zagórski J. , Staszkiewicz B. , Wilkowski J. , Szkarłat F. , Osipiuk J.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of durability tests for the indexable knives, implanted with nitrogen. The results for non-implanted tools are also included. The selected knives contained edge defects. The defects with the character presented in this paper had a minor impact on the durability of the investigated tools.

Słowa kluczowe

EN

WC-Co indexable knives; ion implantation; lifetime; edge defects; particleboard

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2018
• Tom: No. 104
• Strony: 533--539
• Opis fizyczny: Bibliogr. 16 poz.

Twórcy

autor

Barlak M.

• Plasma and Ion Technology Division (FM2), National Centre for Nuclear Research Świerk - NCBJ

autor

Werner Z.

• Plasma and Ion Technology Division (FM2), National Centre for Nuclear Research Świerk - NCBJ

autor

Zagórski J.

• Plasma and Ion Technology Division (FM2), National Centre for Nuclear Research Świerk - NCBJ

autor

Staszkiewicz B.

• Plasma and Ion Technology Division (FM2), National Centre for Nuclear Research Świerk - NCBJ

autor

Wilkowski J.

• Department of Mechanical Processing of Wood, Warsaw University of Life Sciences - SGGW

autor

Szkarłat F.

• Department of Mechanical Processing of Wood, Warsaw University of Life Sciences - SGGW

autor

Osipiuk J.

• Department of Mechanical Processing of Wood, Warsaw University of Life Sciences - SGGW

Bibliografia

• 1. SHEIKH-AHMAD J.Y., BAILEY J.A., 1999: High-temperature wear of cemented tungsten carbide tools while machining particleboard and fiberboard. Journal of Wood Science 45: 445-455.
• 2. PIRSO J., LETUNOVITŠ S., VILJUS M., 2004: Friction and wear behaviour of cemented carbides. Wear 257: 257-265.
• 3. BONNY K., De BAETS P., PEREZ Y., VLEUGELS J., LAUWERS B., 2010: Friction and wear characteristics of WC-Co cemented carbides in dry reciprocating sliding contact. Wear 268: 1504-1517.
• 4. OLOVSJÖ S., JOHANSON R., FALSAFI F., BEXELL U., OLSSON M., 2013: Wear 302: 1546-1554.
• 5. PALOMAR F.E., ZAMBRANO P., GÓMEZ M.I., COLÁS R., CASTILLO A., 2009:Tungsten carbide and tantalum carbide coatings on machining. Tools Ingeniería Mecánica Tecnología y Desarrollo 3: 55-59.
• 6. RAMIREZ C., IDHIL ISMAIL A., GENDARME C., DEHMAS M., AEBYGAUTIER E. POULACHON G., ROSSIA F., 2017: Understanding the diffusion wear mechanisms of WC-10%Co carbide tools during dry machining of titanium alloys. Wear 390-391: 61-70.
• 7. RAWAT S., ATTIA H., 2009: Wear mechanisms and tool life management ofWC-Co drills during dry high speed drilling of woven carbon fibre composites. Wear 267: 1022-1030.
• 8. WILKOWSKI J., BARLAK M., WERNER Z., WACHOWICZ J., CZARNIAK P., 2018: Taguchi analysis of WC-Co tools life in milling of wood-based materials. Chip and Chipless Woodworking Processes 11(1): 205-210.
• 9. WILKOWSKI J., BARLAK M., WERNER Z., CZARNIAK P., WACHOWICZ J., 2018: The effect of the WC-Co properties on the tool wear during particleboards milling. Chip and Chipless Woodworking Processes 11(1): 211-216.
• 10. BARLAK M., WILKOWSKI J., WERNER Z., 2016: Ion implantation changes of tribological and corrosion resistance properties of materials used in wood industry. Annals of Warsaw University of Life Sciences - SGGW, Forestry and Wood Technology 94: 19-27.
• 11. BARLAK M., WILKOWSKI J., BORUSZEWSKI P., WERNER Z., PAŁUBICKI B., 2017: Changes of functional properties of materials used in wood industry after ion implantation process. Annals of Warsaw University of Life Sciences - SGGW, Forestry and Wood Technology 97: 133-139.
• 12. STARODUBTSEV, S.V., ROMANOV, A.M., 1962: Passage of charged particles through matter. Academy of Sciences of the Uzbek SSR, Physico-Technical Institute, Tashkent, Russian, 228.
• 13. SUSPRE, 2001: Interactions of energetic particles. University of Surrey, (https://www.surrey.ac.uk/ion-beam-centre/research-areas/interactions-energeticparticles), Accessed 8 October 2018.
• 14. BUGAEV, S.P., NIKOLAEV, A.G., OKS, E.M., SCHANIN, P.M., YUSHKOV, G.Y., 1994: The “TITAN” ion source. Review of Scientific Instruments 65: 3119-3125.
• 15. JEMIELNIAK K., 2017: Tool and process condition monitoring. Mechanik 7: 504-510.
• 16. WILKOWSKI J., BARLAK M., WERNER Z., BÖTTGER R., KONARSKI P.,PISAREK M., 2018: The effect of nitrogen ion implantation on the properties of WCCo composites used in wood-based materials machining. Poster presentation at Yucomat 2018 Conference, Herceg Novi, Montenegro, 3-7 September, 2018.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).