Modernisation of the workplace as a result of the outbreak of the pandemic

• Autorzy: Kania A. , Polok-Rubiniec M. , Włodarczyk-Fligier A.

Identyfikatory

DOI

10.5604/01.3001.0053.7666

• Języki publikacji: EN

Abstrakty

EN

Purpose: of this paper is to propose modernisation activities, including the improvement of machines and devices that will increase work safety during the epidemic state for the workplace of an injection moulding machine operator in a selected manufacturing company. Design/methodology/approach: In the work brief analyses of a production line and a workplace of an injection moulding machine operator were carried out. Then the threats that occur at the analysed workplace were identified. The risk assessment was done using three methods: matrix according to the PN-N-18002:2011 standard, Risk Score and PHA. Findings: The results of the occupational risk assessment obtained by the three assessment methods were similar and gave similar results. The greatest and unacceptable risk has occurred for the threat of SARS-CoV-2 virus infection. Therefore, the following modernisation solutions were proposed: the introduction of mandatory epidemiological questionnaires, online training for company employees, the use of a three-axis robot, replacement of traditional disinfection dispensers with automatic ones. Practical implications: The results of re-assessing the occupational risk after introducing the proposed improvements showed that the occupational risk was significantly reduced – mainly to the low or very low levels. Originality/value: The proposed modernisation solutions at the workplace of an injection moulding machine operator can be used for each workplace and each epidemiological state.

Słowa kluczowe

EN

materials manufacturing; materials processing; safety and health management; occupational risk assessment; injection moulding operator; Covid-19

PL

wytwarzanie materiałów; obróbka materiałów; zarządzanie bezpieczeństwem i higieną pracy; ocena ryzyka zawodowego; operator wtryskarki; Covid-19

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2023
• Tom: Vol. 118, nr 2
• Strony: 69--77
• Opis fizyczny: Bibliogr. 13 poz., tab.

Twórcy

autor

Kania A.

• Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18a, 44-100 Gliwice, Poland

• https://orcid.org/0000-0003-0337-1344+

autor

Polok-Rubiniec M.

• Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18a, 44-100 Gliwice, Poland

• https://orcid.org/0000-0001-8940-0147

autor

Włodarczyk-Fligier A.

• Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] Work safety: harmful factors. Research and measurements (in Polish). Available from: https://www.pip.gov.pl/pl/f/v/198526/3220BHP20CZYNNIKI20SZKODLIWE2200internet.pdf
• [2] O. Kruzhilko, O. Polukarov, S. Vambol, V. Vambol, N.A. Khan, V. Maystrenko, V.P. Kalinchyk, A.H. Khan, Control of the workplace environment by physical factors and SMART monitoring, Archives of Materials Science and Engineering 103/1 (2020) 18-29. DOI: https://doi.org/10.5604/01.3001.0014.1770
• [3] B. Rączkowski, OHS in practice, XII edition, Human Resources Consulting and Improvement Center, Gdansk, 2009 (in Polish).
• [4] A.P. Bochkovskyi, N.Yu. Sapozhnikova, Development of system of automated occupational health and safety management in enterprises, Journal of Achievements in Materials and Manufacturing Engineering 107/1 (2021) 28-41. DOI: https://doi.org/10.5604/01.3001.0015.2454
• [5] O. Kruzhilko, V. Maystrenko, I. Tkalych, Yu. Polukarov, V.P. Kalinchyk, I. Neklonskyi, O. Ryzhchenko, Study of the harmful factors influence on the occupational risk level: the example of the Ukrainian mining industry, Journal of Achievements in Materials and Manufacturing Engineering 110/1 (2022) 35-41. DOI: https://doi.org/10.5604/01.3001.0015.7029
• [6] A.P. Bochkovskyi, Elaboration of occupational risks evaluation models considering the dynamics of impact of harmful factors, Journal of Achievements in Materials and Manufacturing Engineering 102/2 (2020) 76-85. DOI: https://doi.org/10.5604/01.3001.0014.6777
• [7] M. Krause, Practical aspects of the selection of occupational risk assessment methods, Scientific Journals of the Silesian University of Technology 59 (2011) 173-190 (in Polish).
• [8] D. Smoliński, How to work more safely. SARS-CoV-2 risk assessment, Labor Inspector 10/452 (2020) 6-10 (in Polish).
• [9] Regulation of the Council of Ministers of 2 May 2020 on the establishment of certain restrictions, orders and prohibitions due to the pandemic state, Polish Journal of Laws, item 792 (in Polish).
• [10] Guidelines for industrial plants during the COVID-19 epidemic in Poland (in Polish). Available from: https://psseproszowice.wsse.krakow.pl/index.php/obszarydzialan/109-koronawirus-sars-cov-2/953-wytyczne-dla-zakladow-przemyslowych-wtrakcie-epidemii-covid-19-w-polsce
• [11] PN-N-18002:2011. Occupational health and safety management systems – General guidelines for occupational risk assessment.
• [12] S. Wieczorek, P. Żukowski, Organization of safe work, Tarbonus Publishing House, Tarnobrzeg, 2022 (in Polish).
• [13] https://ryzykazawodowe.pl (in Polish).

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).