Deposition of Polymer Sensor Films on SAW Surface by Electrospraying Technology

• Autorzy: Jasek K. , Pasternak M. , Grabka M. , Neffe S. , Zasada D.

Identyfikatory

DOI

10.1515/aoa-2017-0054

• Języki publikacji: EN

Abstrakty

EN

One of the most important problems with regard to the Surface Acoustic Wave (SAW) gas sensors technology is the deposition of chemosensitive films exhibiting desirable chemical and physical properties. The electrospraying technology seems to be a very promising method of the film deposition in this case. It allows the chemosensitive layers to be obtained out of almost any chemicals and their mixtures in a controllable way. The process gives the possibility to generate specific films with properties unattainable if other methods were to be applied. For example, it allows to deposit solutions of polymers and suspensions of solids in polymer solutions which can degrade in the process of thermal evaporation deposition. The paper describes the results of experiments with electrospraying technique in order to obtain Nafion^® films. The influence of the process parameters on film sensitivity has been studied.

Słowa kluczowe

EN

surface acoustic wave; SAW; gas sensors; deposition of chemosensitive films; Nafion® films

• Wydawca: Instytut Podstawowych Problemów Techniki PAN ; Komitet Akustyki PAN ; Polskie Towarzystwo Akustyczne
• Czasopismo: Archives of Acoustics
• Rocznik: 2017
• Tom: Vol. 42, No. 3
• Strony: 507--513
• Opis fizyczny: Bibliogr. 33 poz., fot., rys., wykr.

Twórcy

autor

Jasek K.

• Institute of Chemistry, Military University of Technology, S. Kaliskiego 2, 00-908 Warszawa, Poland

autor

Pasternak M.

• Institute of Radioelectronics, Military University of Technology, S. Kaliskiego 2, 00-908 Warszawa, Poland

autor

Grabka M.

• Institute of Chemistry, Military University of Technology, S. Kaliskiego 2, 00-908 Warszawa, Poland

autor

Neffe S.

• Institute of Chemistry, Military University of Technology, S. Kaliskiego 2, 00-908 Warszawa, Poland

autor

Zasada D.

• Chair of Advanced Materials and Technologies, Military University of Technology, S. Kaliskiego 2, 00-908 Warszawa, Poland

Bibliografia

• 1. Adhikari B., Majumdar S. (2004), Polymers in sensor applications, Progress in Polymer Science, 29, 7, 699-766, doi: 10.1016/j.progpolymsci.2004.03.002.
• 2. Bain C. D., Whitesides G. M. (1989), Modelling organic surfaces with self-assembled monolayers, Advanced Materials, 1, 4, 110-116, doi: 10.1002/adma.19890010403.
• 3. Benítez R., Soler J., Daza L. (2005), Novel method for preparation of PEMFC electrodes by the electrospray technique, Journal of Power Sources, 151, 108-113.
• 4. Devkota J., Ohodnicki P. R., Greve D. W. (2017), SAW sensors for chemical vapors and gases, Sensors, 17, 801, doi: 10.3390/s17040801.
• 5. Di Natale C., Paolesse R., Macagnano A., Mantini A., Goletti C., D’Amicoa A. (1998), Characterization and design of porphyrins-based broad selectivity chemical sensors for electronic nose applications, Sensors and Actuators B, 52, 1-2, 162-168, doi: 10.1016/S0925-4005(98)00269-X.
• 6. Fernandez de la Mora J., Loscertales I. G. (1994), The current emitted by highly conducted Taylor cones, Journal of Fluid Mechanics, 260, 155-184, doi: 10.1017/S0022112094003472.
• 7. Gañán-Calvo M. (1999), The surface charge in electrospraying: its nature and its universal scaling laws, Journal of Aerosol Science, 30, 863-872.
• 8. Harsanyi G. (1995), Polymer films in sensor applications, CRC Press, ISBN 9781566762014.
• 9. Hassmann K., Gould R. D. (1992), Structural studies of thermally evaporated thin films of copper phthalocyanine, Physica Status Solidi, 132, 91-101.
• 10. Jakubik W., Krzywiecki M., Maciak E., Urbańczyk M. (2012), Bi-layer nanostructures of CuPc and Pd for resistance-type and SAW-type hydrogen gas sensors, Sensors and Actuators B, 175, 255-262, doi: 10.1016/j.snb.2012.10.056.
• 11. Jakubik W., Urbańczyk M., Maciak E. (2009), SAW hydrogen gas sensor based on WO3 and Pd nanostructures, Procedia Chemistry, 1, 1, 200-203, doi:10.1016/j.proche.2009.07.050.
• 12. Jasek K., Miluski W., Pasternak M. (2013), A new system for acoustoelectronic gas sensors analysis, Acta Physica Polonica A, 124, 3, 445-447.
• 13. Jasek K., Neffe S., Pasternak M. (2012), SAW sensor for mercury vapors detection, Acta Physica Polonica A, 122, 5, 825-828.
• 14. Johnson R. W., Hultqvist A., Bent S. F. (2014), A brief review of atomic layer deposition: from fundamentals to applications, Materials Today, 17, 5, 236-246, doi: 10.1016/j.mattod.2014.04.026.
• 15. Kawalec A., Jasek K., Pasternak M. (2008), Measurements results of SAW humidity sensor with Nafion layer, The European Physical Journal Special Topics, 154, 1, 123-126, doi: 10.1140/epjst/e2008-00529-x.
• 16. Lamara T., Belmahi M., Elmazria O., Le Brizoual L., Bougdira J., Rémy M., Alnot P. (2004), Freestanding CVD diamond elaborated by pulsedmicrowave-plasma for ZnO / diamond SAW devices, Diamond and Related Materials, 13, 581-584.
• 17. Lee Y. J., Kim H. B. Kim, Roh Y. R., Cho H. M., Baik S. (1998), Development of SAW gas sensor for monitoring SO2gas, Sensors and Actuators A, 64, 173-178.
• 18. Luo W., Deng J., Fu Q., Zhou D., Hu Y., Gong S., Zheng Z. (2015), Nanocrystalline SnO2film prepared by the aqueous sol-gel method and its application as sensing films of the resistance and SAW H2S sensor, Sensors and Actuators B, 217, 119-128, doi: 10.1016/j.snb.2014.10.078.
• 19. Martin S., Garcia-Ybarra P. L., Castillo J. L. (2010a), Electrospray deposition of catalyst layers with ultra-low Pt loadings for PEM fuel cells cathodes, Journal of Power Sources, 195, 2443-2449.
• 20. Martin S., Garcia-Ybarra P. L., Castillo J. L. (2010b), High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying, International Journal of Hydrogen Energy, 35, 10446-10451.
• 21. Ogata S., Hatae T., Shoguchi K., Shinohara H. (1978), The dimensionless correlation of mean particle diameter in electrostatic atomization, International Chemical Engineering, 18, 3, 488-493.
• 22. Piqué, Auyeung R. C. Y., Stepnowski J. L., Weir D. W., Arnold C. B., McGill R. A., Chrisey D. B. (2003), Laser processing of polymer thin films for chemical sensor applications, Surface and Coatings Technology, 163-164, 293-299.
• 23. Raj V. B., Nimalb A. T., Parmarb Y., Sharmab M. U., Gupta V. (2012), Investigations on the origin of mass and elastic loading in the time varying distinct response of ZnO SAW ammonia sensor, Sensors and Actuators B, 166-167, 576-585, doi: 10.1016/j.snb.2012.03.013.
• 24. Raj V. B., Singh H., Nimal A. T., Sharma M. U., Gupta V. (2013), Oxide thin films (ZnO, TeO2, SnO2, and TiO2) based surface acoustic wave (SAW) E-nose for the detection of chemical warfare agents, Sensors and Actuators B, 178, 636-647, doi: 10.1016/j.snb.2012.12.074.
• 25. Rayleigh R. S. (1882), On the equilibrium of liquid conducting masses charged with electricity, Philosophical Magazine Series, 14, 7, 184-186. doi: 10.1080/14786448208628425.
• 26. Roberts G. (1990), Langmuir-Blodgett films, Plenum, New York.
• 27. Rozhkova A., Prunet-Foch B., Vignes-Adler M. (2015), Star-like breakup of polymeric drops in electrical field, Journal of Non-Newtonian Fluid Mechanics, 226, 46-59, doi: 10.1016/j.jnnfm.2015.10.001.
• 28. Sarkar S., Levit N., Tepper G. (2006), Deposition of polymer coatings onto SAW resonators using AC electrospray, Sensors and Actuators B, 114, 756-761, doi: 10.1016/j.snb.2005.07.051.
• 29. Soluch W. (2008), SAW synchronous multimode resonator with gold electrodes on quartz, IEEE Trans. Ultrason. Ferroelect. Freq. Contr., 55, 6, 1391-1393, doi: 10.1109/TUFFC.2008.803.
• 30. Vanotti M., Blondeau-Patissier V., Moutarlier V., Ballandras S. (2015), Analysis of palladium and yttrium–palladium alloy layers used for hydrogen detection with SAW device, Sensors and Actuators B, 217, 30-35, doi: 10.1016/j.snb.2015.02.049.
• 31. Viespe C., Grigoriu C. (2013), SAW sensor based on highly sensitive nanoporous palladium thin film for hydrogen detection, Microelectronic Engineering, 108, 218-221, doi: 10.1016/j.mee.2012.12.001.
• 32. Zhou R., Schmeisser D., Göpel W. (1996), Mass sensitive detection of carbon dioxide by amino groupfunctionalized polymers, Sensors and Actuators B, 33, 188-193.
• 33. Zimmermann C., Rebière D., Déjous C., Pistré J., Chastaing E., Planade R. (2001), A love-wave gas sensor coated with functionalized polysiloxane for sensing organophosphorus compounds, Sensors and Actuators B, 76, 86-94.