Tilt test of a pallet load unit – simulation studies

• Autorzy: Matyja Tomasz

Identyfikatory

DOI

10.20858/sjsutst.2020.107.8

• Języki publikacji: EN

Abstrakty

EN

This paper presents a dynamic model of a palletised load unit during a static tilt test. The stability (also called rigidity) of a load unit was evaluated. The palletised load unit was built of packages forming layers and protected against disintegration by stretch film. The aim of this study was to compare the results of a static tilt test with a commonly used and recommended dynamic acceleration test.

Słowa kluczowe

EN

tilt test; load unit; stability; simulation model

PL

test pochyleniowy; jednostka ładunkowa; stabilność; model symulacyjny

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2020
• Tom: z. 107
• Strony: 107--117
• Opis fizyczny: Bibliogr. 13 poz.

Twórcy

autor

Matyja Tomasz

• Faculty of Transport and Aviation Engineering, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

Bibliografia

• 1. ASTM D4649. Standard Guide for Selection and Use of Stretch Wrap Films.
• 2. Bisha J. 2012. „Correlation of the elastic properties of stretch film in unit load containment”. PhD thesis. Blacksburg, USA: Virginia Tech.
• 3. Cieśla Maria, Tadeusz Opasiak. 2014. Load securing in cargo transport units. Katowice: PAN. ISBN 978-83-940763-2-0.
• 4. Directive 2014/47/EU of the European Parliament and of the Council. The technical roadside inspection of the roadworthiness of commercial vehicles circulating in the Union.
• 5. EUMOS 40509-2012. Test method for load unit rigidity.
• 6. Gąska Damian, Tomasz Haniszewski. 2016. “Modelling studies on the use of aluminium alloys in lightweight load-carrying crane structures”. Transport Problems 11(3): 13-20. DOI: 10.20858/tp.2016.11.3.2. ISSN: 1896-0596.
• 7. Haniszewski Tomasz, Damian Gaska. 2017. “Numerical modelling of I-Beam jib crane with local stresses in wheel supporting flanges - influence of hoisting speed”. Nase More 64(1): 7-13. DOI: 10.17818/NM/2017/1.2. ISSN: 0469-6255.
• 8. Haniszewski Tomasz. 2017. „Modeling the dynamics of cargo lifting process by overhead crane for dynamic overload factor estimation”. Journal of Vibroengineering 19(1): 75-86. DOI: 10.21595/jve.2016.17310. ISSN: 1392-8716.
• 9. Kuskil’din R.B., M.A. Vasilyeva. 2017. „Dynamic loads during safety braking of the container with cargo”. Procedia Engineering 206: 248-253. DOI: https://doi.org/10.1016/j.proeng.2017.10.469.
• 10. Singh J., K. Saha, T. Sewell. 2017. „Evaluation of stability of unit loads for tilt and shock events during distribution”. Journal of Applied Packaging Research 9(3):73-93.
• 11. Tepić J., V. Todić, I. Tanackov, D. Lukić, G. Stojić, S. Sremac. 2012. “Modular system design for plastic euro pallets”. Metalurgija: 51(2): 241-244. ISSN: 0543-5846.
• 12. The Transportable Test Pallet. Available at: https://www.bestpackaging.com.au/.
• 13. Vlkovský M., M. Šmerek, J. Michálek. 2017. „Cargo securing during transport depending on the type of a road”. IOP Conf. Series: Materials Science and Engineering 245 042001. DOI: 10.1088/1757-899X/245/4/042001.