Investigation on Mechanical Properties and Microstructures of Aluminum Hybrid Composites Reinforced with Al₂O₃/GNPs Binary Particles

• Autorzy: Şenel M. Can , Gürbüz M.

Identyfikatory

DOI

10.24425/amm.2021.134764

• Języki publikacji: EN

Abstrakty

EN

Nowadays, aluminum-based composites have been produced by pure alumina (Al₂O₃) or pure graphene nanoplatelets (GNPs) in aluminum matrix because of the high compressive strength of alumina and the solid lubricant properties of graphene. However, there are no studies on the influence of both alumina and graphene reinforced aluminum composites. In this study, Al-Al₂O₃ and Al-Al₂O₃-GNPs composites were reinforced with pure alumina (between 0 and 30 wt.%), pure graphene (0, 0.1, 0.3, 0.5 wt.%), and their hybrid forms (Al₂O₃-GNPs) by the powder metallurgy method. This method involved ultrasonic dispensing, mixing, filtering, drying, pressing, and sintering processes. From the test results, the micro Vickers hardness of pure aluminum (28.2±1 HV) improved to 51.5±0.8 HV (Al-30Al₂O₃) and 63.1±1 HV (Al-30Al₂O₃-0.1GNPs). Similarly, the ultimate compressive strength (UCS) enhanced from 92.4±4 MPa (pure aluminum) to 165±4.5 MPa (Al-30Al₂O₃) and 188±5 MPa (Al-30Al₂O₃-0.1GNPs), respectively. In conclusion, the Vickers hardness and ultimate compressive strength of aluminum hybrid composites improved up to 0.1 wt.% graphene content. After 0.1 wt.% graphene content, these mechanical properties decreased because of the clumping of graphene nanoparticles.

Słowa kluczowe

EN

composite; aluminum; graphene; alumina; hybrid

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 1
• Strony: 97--106
• Opis fizyczny: Bibliogr. 42 poz., fot., rys., tab., wykr., wzory

Twórcy

autor

Şenel M. Can

• Ondokuz Mayis University, Mechanical Engineering Department, Samsun, Turkey

autor

Gürbüz M.

• Ondokuz Mayis University, Mechanical Engineering Department, Samsun, Turkey

Bibliografia

• [1] G.S. Hanumanth, G.A. Irons, J. Mater. Sci. 28, 2459-2465 (1993).
• [2] Y. Sahin, S. Murphy, J. Mater. Sci. 34, 5399-5407 (1996).
• [3] M. Kok, J. Mater. Process. Tech. 161, 381-387 (2005).
• [4] J.K. Chen, I.S. Huang, Compos. Part B-Eng. 44 (1), 698-703 (2013).
• [5] S.J. Yan, S.L. Dai, X.Y. Zhang, C. Yang, Q.H. Hong, J.Z. Chen, Z.M. Lin, Mat. Sci. Eng. A-Struct. 612, 440-444 (2014).
• [6] F.H. Latief, E.S.M. Sherif, J. Ind. Eng. Chem. 18, 2129-2134 (2012).
• [7] J.L. Li, Y.C. Xiong, X.D. Wang, S.J. Yan, C. Yang, W.W. He, J.Z. Chen, S.Q. Wang, X.Y. Zhang, S.L. Dai, Mat. Sci. Eng. A-Struct. 626, 400-405 (2015).
• [8] A. Saboori, C. Novara, M. Pavese, C. Padini, F. Giorgis, P. Fino, J. Mater. Eng. Perform. 26 (3), 993-999 (2017).
• [9] G. O’Donnel, L. Looney, Mat. Sci. Eng. A-Struct. 303, 292-301 (2001).
• [10] O.G. Neikow, S.S. Naboychenko, G. Dawson, Handbook of Non-Ferrous Metal Powders-Technologies and Applications, Elsevier, Amsterdam (2009).
• [11] R.S. Rana, R. Purohit, V.K. Soni, S. Das, Mater. Today-Proc. 2(4-5), 1149-1156 (2015).
• [12] M. Zamani, H. Dini, A. Svoboda, L. Lindgren, S. Seifeddine, N. Andersson, A.E.W. Jarfors, Int. J. Mech. Sci. 121, 164-170 (2017).
• [13] N. Srivastava, G.P. Chaudhari, Mat. Sci. Eng. A-Struct. 724, 199-207 (2018).
• [14] J. Wang, Z. Li, G. Fan, H. Pan, Z. Chen, D. Zhang, Scripta Mater. 66 (8), 594-597 (2012).
• [15] A.K. Geim, K.S. Novoselov, Nat. Mater. 6, 183-191 (2007).
• [16] E.P. Randviir, D.A.C. Brownson, C.E. Banks, Mater. Today. 17(9), 426-432 (2014).
• [17] N. Savage, Nature, 482, 30-31 (2012).
• [18] V. Singh, D. Joung, L. Zhai, S. Das, S.I. Khondaker, S. Seal, Prog. Mater. Sci. 56 (8), 1178-1271 (2012).
• [19] B. Peng, M. Locascio, P. Zapol, S. Li, S.L. Mielke, G.C. Schatz, H.D. Espinosa, Nat. Nanotechnol. 3 (10), 626-631 (2008).
• [20] C. Balázsi, B. Fényi, N. Hegman, F. Wéber, Z. Vértesy, Z. Kónya, I. Kiricsi, L.P. Biró, P. Arató, Compos. Part B-Eng. 37 (6), 418-424 (2006).
• [21] M.M.H. Bastwros, A.M.K. Esawi, A. Wifi, Wear, 307 (1-2), 164-173 (2013).
• [22] A. Baradeswaran, A.E. Perumal, Compos. Part B-Eng. 56, 472-476 (2014).
• [23] D. Berman, A. Erdemir, A.V. Sumant, Mater. Today, 17 (1), 31-42 (2014).
• [24] Y. Zhu, S. Murali, W. Cai, X. Li, J.W. Suk, J.R. Potts, R.S. Ruoff, Adv. Mater. 22 (35), 3906-3924 (2010).
• [25] H.R. Ezatpour, M. Torabi Parizi, S.A. Sajjadi, G.R. Ebrahimi, A. Chaichi, Mater. Chem. Phys. 178, 119-127 (2016).
• [26] S.A. Sajjadi, H.R. Ezatpour, H. Beygi, Mat. Sci. Eng. A-Struct. 528, 8765-8771 (2011).
• [27] M. Bastwros, G. Kim, C. Zhu, K. Zhang, S.Wang, X. Tang, X. Wang, Compos. Part B-Eng. 60, 111-118 (2014).
• [28] M. Rashad, F. Pan, A. Tang, M. Asif, Prog. Nat. Sci.-Mater. 24(2), 101-108 (2014).
• [29] G. Li, B. Xiong, J. Alloy Compd. 697, 31-36 (2017).
• [30] M. Gürbüz, M.C. Şenel, E. Koç, J. Compos. Mater. 52 (4), 553-563 (2018).
• [31] S.F. Bartolucci, J. Paras, M.A. Rafiee, S. Lee, D. Kapoor, N. Koratkar, Mat. Sci. Eng. A-Struct. 528 (27), 7933-7937 (2011).
• [32] M.C. Şenel, M. Gürbüz, E. Koç, J. Mater. Sci. Technol. 34 (16), 1980-1989 (2018).
• [33] R. Pérez-Bustamante, D. Bolaños-Morales, J. Bonilla-Martínez, I. Estrada-Guel, R. Martínez-Sánchez, J. Alloy Compd. 615 (1), 578-582 (2014).
• [34] M.C. Şenel, M. Gürbüz, E. Koç, Compos. Part B-Eng. 154, 1-9 (2018).
• [35] M. Gürbüz, T. Mutuk, J. Compos. Mater. 52 (4), 543-551 (2018).
• [36] G.E. Dieter, Mechanical Metallurgy, McGraw-Hill, New York (1986).
• [37] Z. Hu, G. Tong, Q. Nian, R. Xu, M. Saei, F. Chen, C. Chen, M. Zhang, H. Guo, J. Xu, Compos. Part B-Eng. 93, 352-359 (2016).
• [38] Z. Cao, X. Wang, J. Li, Y. Wu, H. Zhang, J. Guo, S. Wang, J. Alloy Compd. 696, 498-502 (2017).
• [39] J.M. Torralba, C.E. Costa, F. Velasco, J. Mater. Process. Tech. 133 (1), 203-206 (2003).
• [40] J.W. Kaczmar, K. Pietrzak, W. Wlosinski, J. Mater. Process. Tech. 106, 58-67 (2000)
• [41] C. Chen, Z. Ding, Q. Tan, H. Qi, Y. He, Powder Technol. 257, 83-87 (2014).
• [42] M. Rashad, F. Pan, Z. Yu, M. Asif H. Lin, R. Pan, Prog. Nat. Sci.-Mater. 25, 460-470 (2015)

Uwagi

1. The authors of this study thank Black Sea Advanced Technology Research and Application Center (KITAM) in Ondokuz Mayıs University (OMU) for SEM and XRD analysis.

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).