Recycling and segregation of used aluminium beverage cans according to the residents of Silesia voivodship

• Autorzy: Ingaldi M.
• Języki publikacji: EN

Abstrakty

EN

Aluminium is one of raw materials that can be practically continuously recycled. Thanks to the proper sorting of aluminium scrap it is possible to produce precisely the same products that it was made before Selective waste collection and an extensive network of waste collection points have significant impact on the recovery level of used aluminium beverage cans. The purpose of the article was to analyse the results of surveys on aluminium segregation in Silesia voivodship. According to literature people are increasingly interested in environmental protection and what is happening with waste generated by them. But there is lack of information about people from different regions of Poland. From the research presented in the paper it can be concluded that people realize that used aluminium beverage cans become packaging waste which can be easily recycled so most of them segregate them in everyday life. This is the result of changes in the legislation on municipal waste and their segregation, as well as the element of environmental education.

Słowa kluczowe

EN

aluminium; used beverage cans; recycling; segregation; environmental protection

PL

aluminium; recykling; złom aluminiowy; ochrona środowiska

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2017
• Tom: Vol. 16
• Strony: 7--11
• Opis fizyczny: Bibliogr.10 poz., rys.

Twórcy

autor

Ingaldi M.

• Czestochowa University of Technology, Faculty of Management, Armii Krajowej 19B, Poland

Bibliografia

• 1. DOBRZAŃSKI L. 2002 Podstawy nauki o materiałach i materiałoznawstwie. Materiały inżynierskie z podstawami projektowania materiałowego. Wydawnictwo Naukowo-Techniczne, Warszawa.
• 2. INGALDI M., BORKOWSKI S. 2014. Recycling Process of the Aluminium Cans as an Element of the Sustainable Development Concept. Manufacturing Technology, Vol.14, Iss. 2, 172-178.
• 3. LESTYÁNSZKA ŠKŮRKOVÁ K., INGALDI M. 2014. Recycling process of the aluminium cans as an example of the renewable material sources. Advanced Materials Research, Vol. 1001, 103-108.
• 4. LITWIŃCZYK-KWAŚNICKA M., ROZPONDEK M., SIWKA J. 2012. Influence the thermal process of the removing the varnish coats to the cleanness of the surface aluminium scrap. Materials Science Forum, Vol. 638- 642, 876-881.
• 5. MORYSON G. 2009. Ocena klasyfikacji odpadów aluminium i jego stopów. Archiwum Technologii Maszyn i Automatyzacji, Vol. 29 Iss. 3, 59-72.
• 6. PUSTĚJOVSKÁ P., JURSOVÁ S. 2013. Process engineering in iron production. Chemical and Process Engineering - Inżynieria Chemiczna i Procesowa, No 34 (1), 63-76.
• 7. STULGIS G. 2013. Recykling aluminium – ogniwo gospodarki. Recykling Odpadów, No 6 (150), 22-24.
• 8. ŠVECOVÁ I., TILLOVÁ E., KUCHARIKOVÁ L. 2017. Structural analysis of iron based intermetallic phases in secondary AlSi6Cu4 cast alloy. Production Engineering Archives, No 15, 3-6
• 9. Zintegrowane Zapobieganie i Ograniczanie Zanieczyszczeń (IPPC). 2001.Dokument Referencyjny BAT dla najlepszych dostępnych technik w produkcji metali nieżelaznych, Komisja Europejska.
• 10. NÁPRSTKOVÁ N., CAIS J., SVIANTEK J. 2015. Influence of antimony modification and heat treatment on the AlSi9CuMnNi alloy. Production Engineering Archives, Vol.8, No 3, 18-21.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).