Effect of chip breakers on the cutting force during the machining of steel C45

• Autorzy: Kratochvíl J. , Petrů J. , Pagáč M. , Holubják J. , Mrazik J.

Identyfikatory

DOI

10.12913/22998624/66506

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the dependence of cutting force on the breaker of an indexable cutting insert (ICI). The experiment monitored individual cutting force components for different insert breakers, cutting speeds and feed rates during machining. The cutting depth remained constant. The tool holder, material and coating of the indexable cutting insert was also identical.

Słowa kluczowe

EN

edge geometry; turning forces; breakers

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 1
• Strony: 173--178
• Opis fizyczny: Bibliogr. 11 poz., fig., tab.

Twórcy

autor

Kratochvíl J.

• VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic

autor

Petrů J.

• VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic

autor

Pagáč M.

• VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic

autor

Holubják J.

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovakia

autor

Mrazik J.

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovakia

Bibliografia

• 1. Sadílek, M., Kratochvíl, J., Petrů, J., Cep, R., Zlámal, T., Stančeková, D.: Cutting tool wear monitoring with the use of impedance layers. Tehnicki Vjesnik, Vol. 21 (3), 2014, 639–644.
• 2. Fulemová, J., Řehoř, J.: Influence of form Factor of the Cutting Edge on Tool Life during Finishing Milling. In Procedia Engineering. Vídeň: Elsevier Ltd, 2015, 682-688.
• 3. Novak, M.; Naprstkova, N.; Jozwik, J.: Analysis of the surface profile and its material share during the grinding inconel 718 alloy. Advances in Science and Technology Research Journal, 2015, Vol. 9 (26), 41-48.
• 4. Valášek, P., Müller, M., Hloch, S.: Recycling of corundum particles – two-body abrasive wear of polymeric composites based on waste. Tehnicki Vjesnik- Technical Gazette, Vol. 22 (3), 2015, 567-572.
• 5. Rudawska, A., Reszka, M., Warda, T., Miturska, I., Szabelski, J., Stančekova, D., Skoczylas, A.: Milling as a method of surface pre-treatment of steel for adhesive bonding, Journal of Adhesion Science and Technology, 2016, http://dx.doi.org/10.1080/0 1694243.2016.1191585.
• 6. Hrubý, J., Schindlerová, V., Rentka, J.: Degradation Processes in the Contact Layers of Forming Tools. Manufacturing Technology, Vol. 15 (5) 2015, 842-845.
• 7. Görög, A., Görögová, I.: Current concept of geometrical accuracy. In Vedecké práce MtF STU v Bratislave so sídlom v Trnave. Research papers Faculty of Materials Science and Technology Slovak University of Technology in Trnava. Vol. 22. No. 34 (2014), 43-50.
• 8. h t t p : / / w w w. i s c a r. c o m / e C a t a l o g / i t e m . aspx?cat=5567471 &fnum=3544&mapp=IS&app =21&GFSTYP=M [cit. 2016-06-10]
• 9. h t t p : / /www. i s c a r.com/ eCat a l o g / I t em. aspx?cat=5509359 &fnum=59&mapp=IS [cit. 2016-06-10]
• 10. h t t p : / / w w w. i s c a r. c o m / e C a t a l o g / i t e m . aspx?cat=5566794 &fnum=3420&mapp=IS&app =0&GFSTYP=M [cit. 2016-06-10]
• 11. h t t p : / / w w w. i s c a r. c o m / e C a t a l o g / i t e m . aspx?cat=5508282 &fnum=2967&mapp=IS&app =0&GFSTYP=M [cit. 2016-06-10]

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)