Studies of the AA2519 Alloy Hot Rolling Process and Cladding with EN AW-1050A Alloy

• Autorzy: Płonka B. , Rajda M. , Zamkotowicz Z. , Żelechowski J. , Remsak K. , Korczak P. , Szymański W. , Snieżek L.

Identyfikatory

DOI

10.1515/amm-2016-0070

• Języki publikacji: EN

Abstrakty

EN

The objective of the study was to determine the feasibility of plastic forming by hot rolling of the AA2519 aluminium alloy sheets and cladding these sheets with a layer of the EN AW-1050A alloy. Numerous hot-rolling tests were carried out on the slab ingots to define the parameters of the AA2519 alloy rolling process. It has been established that rolling of the AA2519 alloy should be carried out in the temperature range of 400-440°C. Depending on the required final thickness of the sheet metal, appropriate thickness of the EN AW-1050A alloy sheet, used as a cladding layer, was selected. As a next step, structure and mechanical properties of the resulting AA2519 alloy sheets clad with EN AW-1050A alloy was examined. The thickness of the coating layer was established at 0,3÷0,5mm. Studies covered alloy grain size and the core alloy-cladding material bond strength.

Słowa kluczowe

EN

Al alloys; rolling; cladding; mechanical properties; structure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 1
• Strony: 381--388
• Opis fizyczny: Bibliogr. 10 poz., rys., rys., tab., wykr., wzory

Twórcy

autor

Płonka B.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Rajda M.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Zamkotowicz Z.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Żelechowski J.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Remsak K.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Korczak P.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Szymański W.

• Institute of Non-Ferrous Metals, Light Metals Division, 19 Pilsudskiego Str., 32-050 Skawina, Poland

autor

Snieżek L.

• Military University of Technology, Faculty of Mechanical Engineering, 2 Kaliskiego Str., 00-908 Warszawa, Poland

Bibliografia

• [1] International Alloy Designations and Chemical Composition Limits for Wrought Al and Wrought Al Alloys, The Aluminium Association, April (2006).
• [2] A. Maranda, J. Nowaczewski, E. Włodarczyk, B. Zygmunt, J. Tech. Pchys 20, 19 (1979).
• [3] H. Paul, L. Lityńska-Dobrzańska, M. Miszczyk, M. Prażmowski, -Arch Metall Mater 57, 1151-1162 (2012).
• [4] S. Saravanan, K. Raghukandan, Arch Metall Mater 59, 1615-1618, (2014).
• [5] J. Wypart, D. Rydz, G. Stradomski, H. Dyja, Arch Metall Mater 59, 1572, (2014).
• [6] http://www.aluminium-konin.com.pl/predefUpload/katalog_pl.pdf
• [7] B. Płonka, J. Senderski, Key Eng Mat 491, 59-66 (2012)
• [8] J. Senderski, B. Płonka, M. Lech-Grega, S. Boczkal, W. Pachla, Arch Mater Sci Eng 39, 97-102 (2009).
• [9] J. Senderski, M. Lech-Grega, B. Płonka, Arch Metall Mater 56, 475-486 (2011).
• [10] B. Płonka, A. Kłyszewski, J. Senderski, M. Lech-Grega, Arch Civ Mech Eng 8, 2, 149-156 (2008).

Uwagi

EN

Research was conducted within die Applied Research Programme NCBR in project nr PBS2/A5/35/2013 titled "New, advanced Al-Ti layered materials with enhanced ballistic resistance for aviation and space constructions"; realization period 2013-2016.

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę