Analytical and Experimental Studies of Stability of Cylindrical Shells with a Cut-Out

• Autorzy: Stasiewicz P.
• Języki publikacji: EN

Abstrakty

EN

Thin-walled structure, by its nature, is subjected to loss of stability. In addition, the shell has a cutout, which reduces the critical load. The aim of this study is to determine critical stress of the shell under pure bending. The goal was achieved in two ways: experimentally and analytically. Experimental studies were carried out on a specially designed test bench with the use of a resistive strain gauge. In the analytical solution the form of buckled shell was assumed, and then Bubnov-Galerkin method was applied.

Słowa kluczowe

EN

cylindrical shell; buckling; cut-out

PL

powłoka cylindryczna; wyboczenie; wycięcie

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2013
• Tom: Vol. 17, nr 2
• Strony: 167--176
• Opis fizyczny: Bibliogr. 11 poz.

Twórcy

autor

Stasiewicz P.

• Institute of Applied Mechanics Poznań University of Technology Jana Pawa II 24, 60-965 Poznań, Poland

Bibliografia

• [1] Volmir, A. S.: Stability of deformable systems, Izd. Nauka, Fiz-Mat-Lit, Moskwa, 1967.
• [2] Staat, M.: Local and global collapse pressure of longitudinally flawed pipes and vessels, International Journal of Pressure Vessels and Piping, Vol. 82, 217–225, 2005.
• [3] Aghajari, S., Abedi, K. and Showkati, H.: Buckling and post-buckling behavior of thin–walled cylindrical steel shells with varying thickness subjected to uniform external pressure, Thin-Walled Structures, Vol. 44, 904–909, 2006.
• [4] Ahn, S. H., Nam, K. W., Takahashi, K. and Ando, K.: Comparison of experimental and finite element analytical results for the strength and the deformation of pipes with local wall thinning subjected to bending moment, Nuclear Engineering and Design, Vol. 236, 140–155, 2006.
• [5] Jullien, J. F. and Limam, A.: Effects of openings of the buckling of cylindrical shells subjected to axial compression, Thin-Walled Structures, Vol. 31, 187–202, 1998.
• [6] Vaziri, A. and Estekanchi, H. E.: Buckling of cracked cylindrical thin shells under combined internal pressure and axial compression, Thin-Walled Structures, Vol. 44, 141–151, 2006.
• [7] Schenk, C. A. and Schueller, G. I.: Buckling analysis of cylindrical shells with cutouts including random boundary and geometric imperfections, Comput. Methods Appl. Mech. Engrg, Vol. 196, 3424–3434, 2007.
• [8] Meng-Kao, Y., Ming-Chyuan, L. and Wen-Tsang, W.: Bending buckling of an elastoplastic cylindrical shell with a cutout, Engineering Structures, Vol. 21, 996–1005, 1999.
• [9] Alashti, R. A., Rahimi, G. H. and Poursaeidi, E.: Plastic limit load of cylindrical shells with cutouts subject to pure bending moment, International Journal of Pressure Vessels and Piping, Vol. 85, 498–506, 2008.
• [10] Wilde, R., Zawodny, P. and Magnucki, K.: Critical state of an axially compressed cylindrical panel with three edges simply supported and one edge free, Thin-Walled Structures, Vol. 45, 955–959, 2007.
• [11] Timoshenko, S. and Goodier, J. N.: Theory of Elasticity, McGraw-Hill Book Company, New York, Toronto, London, 1951.