The Critical Conditions and Kinetics Required for Dynamic Recrystallization in a High-Carbon Tool Steel

• Autorzy: Zhang Yong-Ji , Wu Guang-Lian , Wu Shang-Wen

Identyfikatory

DOI

10.24425/amm.2021.134767

• Języki publikacji: EN

Abstrakty

EN

A hot compression test was conducted on a Gleeble-3500 thermo-simulation machine to study the critical conditions and kinetics of dynamic recrystallization in a high-carbon tool steel. The critical conditions for the initiation of dynamic recrystallization were determined using the working-hardening theory. The quantitative relationship between the critical characteristics of dynamic recrystallization and the hot deformation parameters were elucidated based on two different methods: the apparent method and physically based method. It was found that the two methods both have high applicability for the investigated steel, but the physically-based method needs less parameters and makes it possible to study the effect of different factors. A dynamic recrystallization kinetics model was used to calculate the recrystallization volume fraction under different conditions. The calculation results matched well with the data obtained from the flow curves.

Słowa kluczowe

EN

high-carbon steel; critical conditions; dynamic recrystallization; work-hardening; kinetics model

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 1
• Strony: 119--125
• Opis fizyczny: Bibliogr. 24 poz., rys., wzory

Twórcy

autor

Zhang Yong-Ji

• School of Minerals Processing and Bioengineering, Central South University, China

autor

Wu Guang-Lian

• School of Minerals Processing and Bioengineering, Central South University, China

autor

Wu Shang-Wen

• School of Minerals Processing and Bioengineering, Central South University, China

Bibliografia

• [1] S.T. Hu, H.Y. Chen, S.L. Li, G.B. Tang, Heat. Treat. Metals. 40 (8), 132-137 (2015).
• [2] S.T. Hu, W.H. Yu, X.J. Lian, S.B. Zhai, Spec. Steel. 37 (1), 57-59 (2016).
• [3] H. Mirzadeh, A. Najafizadeh, Mater Des. 31 (3), 1174-1179 (2010).
• [4] S. Du, S. Chen, J. Song, Y.T. Li, Metall. Mater. Trans. A. 48 (3), 1310-1320 (2017).
• [5] B.C. Zhao, G.Y. Li, F.L. Liu, X.M. Hu, L. Huang, Q.Y. Sha, Mater. Manuf. Process. 30 (10), 1235-1239 (2015).
• [6] H. Mirzadeh, Metall. Mater. Trans. A. 46 (9), 1-11 (2015).
• [7] H. Jiang, J.X. Dong, M.C. Zhang, L. Zheng, Z.H. Yao, J. Alloys. Compd. 647, 338-350 (2015).
• [8] E.I. Poliak, J.J. Jonas, ISIJ. Int. 43 (5), 692-700 (2003).
• [9] J.J. Jonas, E.I. Poliak, Mater. Sci. Forum. 426-432, 57-66 (2003).
• [10] Solhjoo, Soheil, Mater. Des. 54 (2), 390-393 (2014).
• [11] N.D. Ryan, H.J. Mcqueen, J. Mater. Process. Technol. 21 (2), 177-179 (1990).
• [12] A. Najafizadeh, J.J. Jonas, ISIJ. Int. 46 (2), 1679-1684 (2006).
• [13] M.R.G. Ferdowsi, D. Nakhaie, P.H. Benhangi, G.R. Ebrahimi, J. Mater. Eng. Perform. 23 (3), 1077-1087 (2014).
• [14] H. Mirzadeh, J.M. Cabrera, A. Najafizadeh, Metall. Mater. Trans. A. 43 (1), 108-123 (2012).
• [15] G.L. Wu, C.Y. Zhou, X.B. Liu, J. Cent. South. Univ. 23 (5), 1007-1014 (2016).
• [16] B.C. Zhao, Z. Tan, G.Y. Lin, Q. Lu, Arch. of Metall. & Mater. 63 (1), 379-386 (2018).
• [17] H. Mirzadeh, J.M. Cabrera, A. Najafizadeh, Acta. Metall. 59 (16), 6441-6448 (2011).
• [18] H. Mirzadeh, M. Roostaei, M.H. Parsa, Mater. Des. 68, 228-231 (2015).
• [19] S. Saadatkia, H. Mirzadeh, J.M. Cabrera, Mat. Sci. Eng. A. 636, 196-202 (2015).
• [20] H. Mirzadeh, Mater. Des. 65, 80-82 (2015).
• [21] G.R. Stewart, A.M. Elwazri, S. Yue, J.J. Jonas, Metal. Science. Journal. 22 (5), 519-524 (2006).
• [22] A.M. Elwazri, P. Wanjara, S. Yue, Mater. Sci. Tech. 20 (11), 1469-1473 (2004).
• [23] M. E. Wahabi, L. Gavard, F. Montheillet, Acta. Mater. 53 (17), 4605-4612 (2005).
• [24] H. Mirzadeh, M. Roostaei, M.H. Parsa, Int. J. Mater. Res. 107 (3), 277-279 (2016).

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).