Rapid Prototyping of wax foundry models in an incremental process

• Autorzy: Kozik B. , Budzik G. , Dziubek T. , Grzelka M. , Tutak M.

Warianty tytułu

PL

Szybkie prototypowanie woskowych modeli odlewniczych w procesie przyrostowym

• Języki publikacji: EN

Abstrakty

EN

The paper presents an analysis incremental methods of creating wax founding models. There are two methods of Rapid Prototyping of wax models in an incremental process which are more and more often used in industrial practice and in scientific research. Applying Rapid Prototyping methods in the process of making casts allows for acceleration of work on preparing prototypes. It is especially important in case of element having complicated shapes. The time of making a wax model depending on the size and the applied RP method may vary from several to a few dozen hours.

PL

Artykuł przedstawia analizę przyrostowych metod wytwarzania woskowych modeli odlewniczych. W praktyce przemysłowej i badaniach naukowych stosuje się coraz częściej metody szybkiego prototypowania modeli woskowych w procesie przyrostowym. Zastosowanie metod RP w procesie wytwarzania odlewów pozwala na przyspieszenie prac nad przygotowaniem prototypów. Jest to szczególnie ważne w przypadku elementów o skomplikowanych kształtach. Czas wykonania modelu woskowego w zależności od gabarytów i zastosowanej metody Rapid Prototyping może wynieść od kilku do kilkudziesięciu godzin.

Słowa kluczowe

EN

rapid prototyping; wax models; 3D-CAD model

PL

prototypowanie szybkie; model woskowy; model 3D-CAD

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2011
• Tom: Vol. 11, iss. 2 spec.
• Strony: 113--116
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Kozik B.

• Rzeszów University of Technology, Al. Powstańców Warszawy 8, 35-959 Rzeszów

autor

Budzik G.

• Rzeszów University of Technology, Al. Powstańców Warszawy 8, 35-959 Rzeszów

autor

Dziubek T.

• Rzeszów University of Technology, Al. Powstańców Warszawy 8, 35-959 Rzeszów

autor

Grzelka M.

• Institute of Mechanical Technology, Poznan University of Technology

autor

Tutak M.

• WSK PZL Rzeszów, ul. Hetmańska 120, Rzeszów

Bibliografia

• [1] G. Budzik, H. Matysiak, J. Pacana, M. Cygnar, The analysis of chosen methods of Rapid Prototyping of casting models for blades of aircraft engines, Combustion Engines No 2009-SC1, s. 283-288.
• [2] N. Homburg, E. Wellbrock, Knowledge – based manufacturing strategy and methods for foundries, Conference and Exhibition for Rapid Technology, Erfurt 2006.
• [3] R. Haratym, Dimensional accuracy of investment casting for the burned pattern process, Archives of Foundry, Volume 6, No18 (2/2), (2006) 231-236.
• [4] R. Haratym, J. Tomasik, The influence of ceramic mould quality on surface geometry of al investment casting, Archives of Foundry, Volume 6, No18 (2/2), (2006) 237-242.
• [5] A. Gebhardt, Rapid Prototyping, Carl Hanser Verlag, Munich 2006.
• [6] T. Wohlers, Wohlers Report 2009 – State of the Industry, Annual Worldwide Pro-gress Report. Wohlers Associates Inc., Fort Collins, CO, USA 2009.
• [7] J.C. Feriera, E. Santos, H. Madureira, J.Castro, Integration of VP/RP/RT/RE/RM for rapid product and process development, Rapid Prototyping Journal Vol. 12 No. 1/2006, Emerald 2006, 18-28.
• [8] G. Budzik, T. Markowski, M. Sobolak, Prototyping of Bevel Gears of Aircraft Power Transmission, Journal of KONES Powertrain and Transport, Vol. 14, No. 2, Warszawa 2007, s. 61-66.
• [9] G. Budzik, T. Markowski, M. Sobolak, Hybrid foundry patterns of bevel gears. Archives of Foundry Engineering, Vol. 7, Issue 1/2007, s. 131-134.
• [10] G. Budzik, Surface Roughness of Aircraft Engine Blade Models Produced with Various Methods of Rapid Prototyping, Journal of KONES Powertrain and Transport, Vol. 14, No. 2, Warszawa 2007, s. 55-60.
• [11] G. Budzik, The analysis of the possibility of the application of the casting waxes in the process RP, Archives of Foundry Engineering, vol. 9, No 2/2009, s. 133-136.
• [12] I. Gajdoš, J. Slota, E. Spišák, FDM prototypes virtual modeling, ICAT 2008, 2nd International Conference on Additive Technologies: DAAAM Specialized Conference: September 17th -19th, 2008, Ptuj, Slovenia: Proceedings. Vienna: DAAAM International, 3 p. ISBN 3-901509-72-0.
• [13] W. Liou, Rapid Prototyping and engineering applications – a toolbox for prototype development, Taylor & Francis Group, 2008.
• [14] E. Bassoli, A. Gatto, L. Iuliano, M.G. Violente, 3D printing technique applied to rapid casting, Rapid Prototyping Journal, 13/3 (2007).
• [15] G. Budzik, Possibilities of utilizing 3DP technology for foundry mould making, Archives of Foundry Engineering, Vol. 7, Issue 2/2007, s. 65-68.
• [16] From CAD to casting, just by printing, Die Casting & Foundry Techniques – December 2009.
• [17] Digital Core & Molding Making Machine – Prometal RCT GmbH Augburg Germany 2009.
• [18] Solidscape T76 System Awarded “BEST OF SHOW” and “COOLEST TECH PRODUCT” JCK Magazine, August 2007.
• [19] ProJet CPX 3000 – Real Wax Pattern Production System, 3D Systems, Rock Hill 2009.