Physical Simulation of the Mannesmann Effect in the Rolling Process

• Autorzy: Wójcik Ł. , Pater Z.

Identyfikatory

DOI

10.24425/amm.2019.130103

• Języki publikacji: EN

Abstrakty

EN

The study presents the results of laboratory testing of the phenomenon of cracking in the process of cross rolling. A new method of determining the critical value of the damage function was developed, in which a disc-shaped sample is subjected to rotational compression in a channel. In this method the Mannesmann effect was used. The laboratory tests were conducted for C45, 50HS and R260 grade steel in the temperature range 950°C-1150°C. In order to research various methods of simulating the phenomenon of cracking in the process of cross rolling, physical modelling was also employed. The model material was commercial plasticine, cooled to the temperature 0°C-20°C. Comparing the test results for both the real and model material allowed one to determine the range of the forming temperature for the model material, in which the cracking process is similar to the case of the real material.

Słowa kluczowe

EN

Mannesmann effect; physical modelling; plasticine; crack; cross-rolling process

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 4
• Strony: 1369--1375
• Opis fizyczny: Bibliogr. 36 poz., fot., rys., tab., wzory

Twórcy

autor

Wójcik Ł.

• Lublin University of Technology, 38D Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Pater Z.

• Lublin University of Technology, 38D Nadbystrzycka Str., 20-618 Lublin, Poland

Bibliografia

• [1] Z. Pater, Walcowanie poprzeczno-klinowe, Lublin (2009).
• [2] M. Skripalenko, B. Romantsev, S. Galkin, M. Skripalenko, L. Kaputkina, T. Huy, Metallurgist. 61 (11-12), 925-933 (2018).
• [3] G. V. Kozhevnikova, Theory and Practice of Cross-Wedge Rolling, Minsk (2010).
• [4] A. Ghiotti, S. Fanini, S. Bruschi, P. F. Bariani, CIRP Annals - Manufacturing Technology 58, 255-258 (2009).
• [5] G. Liu, Z. Zhong, Z. Shen, Procedia Engineer. 81, 263-267 (2014).
• [6] Y. Dong, K. A. Tagavi, M. R. Lovell, Z. Deng, Int. J. Mech. Sci. 42, 1233-1253 (2000).
• [7] G. Liu, G. Ren, C. Xu, Z. Jiang, Z. Shen, J. Mech. Eng. 20 (2), 150-152 (2004).
• [8] G. Fang, L. P. Lei, P. Zeng, J. Mater. Process. Tech. 129, 245-249 (2002).
• [9] K. Mori, H. Yoshimura, K. Osakada, J. Mater. Process. Tech. 80-81, 700-706 (1998).
• [10] M.-S. Joun, J. Lee, J.-M. Cho, S.-W. Jeong, H.-K. Moon, Procedia Engineer. 81, 197-202 (2014).
• [11] H. W. Lee, G. A. Lee, D. J. Yoon, S. Choi, K. H. Na, M. Y. Hwang, J. Mater. Process. Tech. 201, 112-117 (2008).
• [12] F.-J. Wang, Y.-H. Shuang, J.-H. Hu, G.-H. Wang, J.-C. Sun, J. Mater. Process. Tech. 214, 1597-1604 (2014).
• [13] T. Komischke, P. Hora, G. Domani, M. Plamondon, R. Kaufann, Procedia Manufacturing 15, 176-184 (2018).
• [14] Z. Pater, Ł. Wójcik, P. Walczuk, Advances in Science and Technology Research Journal 10, 752-757 (2011).
• [15] M. F. Novella, A. Ghiotti, S. Bruschi, P. F. Bariani, Procedia Engineer. 81, 221-226 (2014).
• [16] M. F. Novella, A. Ghiotti, S. Bruschi, P. F. Bariani, J. Mater. Process. Tech. 222, 259-267 (2015).
• [17] L. Kowalczyk, Modelowanie fizykalne procesów obróbki plastycznej, Radom (1995).
• [18] Y. H. Moon, C. J. Van Tyne, J. Mater. Process. Tech. 99, 185-190 (2000).
• [19] J. Rasty, H. Sofuoglu, Tribol. Int. 33, 523-529 (2000).
• [20] M. Arentoft, Z. Gronostajski, A. Niechajowicz, T. Wanheim, J. Mater. Process. Tech. 106, 2-7 (2000).
• [21] Z. C. Sun, J. Cao, H.-L. Wu, Z.-K.Yin, Int. J. Adv. Manuf. Tech. 98, 2933-2942 (2018).
• [22] B. Krishnamurthy, O. Bylya, K. Davey, Procedia Engineer. 207, 1075-1080 (2017).
• [23] W. Zhou, J. Lin, T. A. Dean, L. Wang, Int. J. Mach. Tool. Manu. 126, 27-43 (2018).
• [24] I. Balasundar, M. Sudhakara Rao, T. Raghu, Material and Design 30, 1050-1059 (2009).
• [25] D. I. Buteler, P.C.U. Neves, L. V. Ramos, C.E.R. Santos, R. M. Souza, A. Sinatora, J. Mater. Process. Tech. 179, 50-55 (2006).
• [26] Y.-M. Hwang, W. M. Tsai, F. H. Tsai, I Her. Int. J. Mach. Tool. Manu. 46, 1555-1562 (2006).
• [27] J. R. Cho, W. B. Bae, Y. H. Kim, S. S. Choi, D. K. Kim, J. Mater. Process. Tech. 80-81, 161-165 (1998).
• [28] Y. Dong, M. Lovell, K. Tagavi, J. Mater. Process. Tech. 80-81, 273-281 (1998).
• [29] M. M. Skripalenko, E. Bazhenov, B. A. Romantsev, M. N. Skripalenko, T. B. Huy, Y. A. Gladkov, Mater. Sci. Tech. 32 (16), 1712-1720 (2016).
• [30] Ł. Wójcik, K. Lis, Z. Pater, Open Engineering, 6 (1), 653-659 (2016).
• [31] Ł. Wójcik, Z. Pater, Acta Mechanica et Automatic 12 (4), 286-293 (2018).
• [32] Ł. Wójcik, Z. Pater, Hutnik Wiadomości Hutnicze 85, 362-366 (2018).
• [33] A. Asswmpour, S. Razi, J. Mech. Eng. 4 (1), 61-69 (2003).
• [34] V. Vazquez, T. Altan, J. Mater. Process. Tech. 98, 212-223 (2000).
• [35] A.E.M. Pertence, P. R. Cetlin, J. Mater. Process. Tech. 84, 261-267 (1998).
• [36] A. Segawa, T. Kawanami, J. Mater. Process. Tech. 47, 375-384 (1995).

Uwagi

EN

The research has been conducted under the project No. 2017/25/B/ST8/00294 financed by the National Science Centre, Poland.