Modeling of frequency response of transformer winding with axial deformations

• Autorzy: Gawrylczyk K. M. , Banaszak S.

Identyfikatory

DOI

10.2478/aee-2014-0001

• Języki publikacji: EN

Abstrakty

EN

One of important methods used for diagnostics of a transformer’s active part is Frequency Response Analysis (FRA). It allows to determine the mechanical condition of windings, their displacements, deformations and electric faults, as well as some problems with internal leads and connections, core and bushings. Still pending problem is interpretation of measurements results. One of approaches is application of computer modeling to simulate various failure modes and connected with them changes in FRA response. The paper presents two types of models, one based on lumped parameters with RLC elements, and one based on distributed parameters with TLM method. Both methods give similar results, comparable to real measurements of simulated coil.

Słowa kluczowe

EN

transformer; winding; frequency response analysis (FRA); lumped parameters method; transmission line method

• Wydawca: Polish Academy of Sciences, Committee on Electrical Engineering
• Czasopismo: Archives of Electrical Engineering
• Rocznik: 2014
• Tom: Vol. 63, nr 1
• Strony: 5--17
• Opis fizyczny: Bibliogr. 11 poz., rys., wykr., wz.

Twórcy

autor

Gawrylczyk K. M.

• Department of Electrotechnology and Diagnostics West Pomeranian University of Technology ul. Sikorskiego 37, 70-313 Szczecin, Poland

autor

Banaszak S.

• Department of Electrotechnology and Diagnostics West Pomeranian University of Technology ul. Sikorskiego 37, 70-313 Szczecin, Poland

Bibliografia

• [1] International standard IEC 60076-18 Power transformers - Part 18. Measurement of frequency response (2012).
• [2] Azzouz Z., Foggia A., Pierrat L., Meunier G., 3d Finite Element Computation of the High Frequency Parameter of Power Transformer Windings. IEEE Trans. on Magnetics 29(2): 1407-1410 (1993).
• [3] Banaszak Sz. Conformity of Models and Measurements of Windings Deformations in Frequency Response Analysis Method. Przegląd Elektrotechniczny 7: 278-280 (2010).
• [4] Bjerkan E., High Frequency Modeling of Power Transformers. Stresses and Diagnostics. Doctoral Thesis, Norwegian University of Science and Technology (2005).
• [5] Dick E.P., Erven C.C., Transformer Diagnostic Testing by Frequency Response Analysis, IEEE Trans. on Power Apparatus and Systems PAS-97, 6: 2144-2153 (1978).
• [6] Eslamian M., Vahidi B., New Methods for Computation of the Inductance Matrix of Transformer Windings for Very Fast Transients Studies. IEEE Trans. on Power Delivery 27(4): 2326-2333 (2012).
• [7] Gawrylczyk K.M., Banaszak Sz., Computer Modeling in the Diagnostics of Transformers’ Windings Deformations. Computer Application in Electrical Engineering, Poznań University of Technology, pp. 132-140 (2010).
• [8] de Gersem H., Henze O., Weiland T., Binder A. Simulation of Wave Propagation Effects in Machine Windings, COMPEL 29(1): 23-38 (2010).
• [9] Jayasinghe J.A.S.B, Wang Z.D., Darwin A.W., Jarman P.N., Practical Issues in Making FRA Measurements on Power Transformers, XIVth International Symposium on High Voltage Engineering, Beijing, China, G-013 (2005).
• [10] Skibinski G., Kerkman R., Leggate D., Pankau J., Schlegel D., Reflected Wave Modeling Techniques for PWM AC Motor Drives, Proc. of the IEEE Applied Power Conference, Anaheim, CA, USA, pp. 1021-1029.
• [11] Wang H., Butler K.L., Finite Element Analysis of Internal Winding Faults in Distribution Transformers, IEEE Trans. on Power Delivery 16(3): 422-427 (2001).