PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modeling the inspection robot with magnetic pressure pad

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This article presents the process of designing a robot with a magnetic pressure pad for inspections of ferromagnetic ventilation ducts. In compliance with the assumptions, the CAD design of the robot was developed in a 3D programming environment. The designing proces brought about a mathematical model of the robot with one pair of magnetic drive modules, including simulation in a MATLAB/Simulink environment. The model accounted for parameters such as rolling resistance force, transverse resistance moment, magnetic attraction force, solid moment of inertia, and other factors. The magnetic pressure pad allowed for moving the robot in magnetic ventilation systems irrespective of slopes and shapes of ducts.
Rocznik
Strony
50--58
Opis fizyczny
Bibliogr. 29 poz., il. kolor., 1 fot., rys., wykr.
Twórcy
  • Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics
  • Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics
  • Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics
  • Institute of Technology, State University of Applied Sciences in Nowy Sącz
Bibliografia
  • [1] Choi H.R., Roh S.: In-pipe robot with active steering capability for moving inside of pipelines. [In:] Bioinspiration and Robotics Walking and Climbing Robots, InTech, 375-402, 2007.
  • [2] Horodinca M.H., Doroftei I., Mignon E., Preumont A.: A simple architecture for in-pipe inspection robots.Proceedings of International Colloquium on Mobile and Autonomous Systems, 61-64, 2002.
  • [3] Tadakuma K., Ming A., Shimojo M., Tadakuma R., NagataniK., Yoshida K., Iagnemma K.: Basic running test of the cylindrical tracked vehicle with sideways mobility. InIntelligent Robots and Systems, IROS 2009. IEEE/RSJ International Conference on,1679- 1684, 2009.
  • [4] Wang Y., & Zhang J.: Autonomous air duct cleaning robot system. InCircuits and Systems,MWSCAS’06. 49th IEEE International Midwest Symposium on,1, 510-513, 2006.
  • [5] Inuktun: Inuktun crawler vehicles, http://www.inuktun.com/ crawler-vehicles, accessed on 24.04.2012.
  • [6] Hydropulsion: Vertical Crawler Specification Sheet, http: //www.hydropulsion.com/roboticcrawler-systems/verticalcrawler/ verticalcrawler.pdf, accessed on 24.04.2012.
  • [7] Ipek: ROVVER Brochure, http://www.ipek.at/fileadmin/FILES/ downloads/brochures/iPEKrovverweben.pdf, accessed on 08.03.2012.
  • [8] Redzone: SOLO Unmanned Inspection Robot, http://www. redzone.com/products/solo%C2%AE, accessed on 24.04.2012.
  • [9] Cues: Ultra Shorty III, http://www.cuesinc.com/UltraShortyIII. html, accessed on 24.04.2012.
  • [10] Narewski M.: HISMAR-underwater hull inspection and cleaning system as a tool for ship propulsion system performance increase. Journal of Polish CIMAC,4(2), 227-234, 2009.
  • [11] Slocum A. H., Awtar S., & Hart J.:Magnebots-a magnetic wheels based overhead transportation concept.IFAC Proceedings Volumes, 35(2), 761-766, 2002.
  • [12] Slocum A., Lang J., Awtar S., Hart A. J., & Mukaddam K.: Magnetically preloaded wheels. InProc. 4th Inter. Conf. of the European Society of Precision Engineering and Nanotechnology,2004.
  • [13] Burdziński Z.: Theory of Motion of a Tracked Vehicle (in Polish). Wydawnictwa Komunikacji i Łączności, Warszawa,1972.
  • [14] Chodkowski A.W.: Design and Calculations of High Speed Tracked Vehicles (in Polish). Wydawnictwa Komunikacji i Łączności, Warszawa,1990.
  • [15] Dajniak H.: Tractors, Theory of Motion and Design (in Polish). Wydawnictwa Komunikacji i Łączności, Warszawa,1985.
  • [16] Żylski W.: Kinematics and Dynamics of Wheeled Mobile Robots (in Polish).Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszow, 1996.
  • [17] Giergiel J.,Kurc K.: Identification of the mathematical model of an inspection mobile robot with fuzzy logic systems and neural networks.Journal of Theoretical and Applied Mechanics,vol. 49(1), 209-225, 2011.
  • [18] Kurc K., Szybicki D.: Kinematics of a Robot with Crawler Drive. Mechanics and Mechanical Engineering, 15(4), 93-101, 2011.
  • [19] Giergiel J., Kurc K.: Modelling and identification of the superintending mobile robot. Mechanics and Mechanical Engineering, 13(2), 23-31, 2009.
  • [20] Gierlak P., Kurc K.,Szybicki D.: Mobile crawler robot vibration analysis in the contexts of motion speed selection.Journal of Vibroengineering,19(4),2403-2412,2017.
  • [21] Tutak J. S.: Design of ELISE robot for the paretic upper limb of stroke survivors. Journal of Vibroengineering,18(6), 4069- 4085,2016.
  • [22] Tutak J. S., Wiech J.: Horizontal automated storage and retrieval system. Advances in Science and Technology Research Journal, 11(1), 82-95, 2017.
  • [23] Giergiel M., Buratowski T., Małka P., Kurc K., Kohut P., Majkut K.: The project of tank inspection robot. Key Engineering Materials, Trans Tech Publications,518, 375-383, 2012.
  • [24] Ciszewski M., Buratowski T., Giergiel M., Kurc K.,Małka P.: Mobile inspection robot. Applied Mechanics and Materials, 319, 385- 392, 2013.
  • [25] Giergiel J., Żylski W.: Description of motion of a mobile robot by Maggie’s equations. Journal of Theoretical and Applied Mechanics, 43(3), 511-521, 2005.
  • [26] Ciszewski M., Wacławski M., Buratowski T., Giergiel M., Kurc K.: Design, modelling and laboratory testing of a pipe inspection robot. Archive of Mechanical Engineering,62(3), 395-408,2015.
  • [27] Kurc K., Szybicki D., Burghardt A., Muszyńska M.: The application of virtual prototyping methods to determine the dynamic parameters of mobile robot. Open Engineering,6(1), 55-63, 2016.
  • [28] Magnetismus:http://www.ibsmagnet.de/pdf/de/ibs_d.pdf, 2013.
  • [29] Giergiel J., Kurc K., Szybicki D.: Mechatronics of the inspection robots with crawler drive (in Polish), ISBN 978-83-7199-963-1, Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszow.2014.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-e86c5e9c-3736-4d77-99a1-f3eddbc9651f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.