Influence of the amount and type of anti-adhesive agent on selected properties of fibreboards

• Autorzy: Pawlik Julia , Kowaluk Grzegorz

Identyfikatory

DOI

10.5604/01.3001.0054.3095

• Języki publikacji: EN

Abstrakty

EN

Influence of the amount and type of anti-adhesive agent on selected properties od fibreboards. The aim of the research was to determine the effect of the type and amount of release agent used in the manufacture of high-density fiberboards (HDF) on selected mechanical and physical properties of the produced boards. The scope of work included producing boards under laboratory conditions with 10 g/m2, 25 g/m2 and 50 g/m2 applied to the surface of the board and subjecting them to selected physical and mechanical importance. The results obtained show that the properties of the manufactured boards are related to the amount of formulation applied and that by using the right amount of formulation we can obtain values that meet the requirements of the relevant European standards.

PL

Wpływ ilości i rodzaju środka antyadhezyjnego na wybrane właściwości płyt pilśniowych. Celem badań było określenie wpływu rodzaju i ilości środka antyadhezyjnego stosowanego w produkcji płyt HDF na wybrane właściwości mechaniczne i fizyczne wytworzonych płyt. Zakres prac obejmował wytworzenie w warunkach laboratoryjnych płyt o naniesieniu środka antyadhezyjnego w ilości 10 g/m2, 25 g/m2 i 50 g/m2 naniesionych na powierzchnię kobierca płyty przed prasowaniem oraz poddanie ich wybranym oddziaływaniom fizycznym i mechanicznym. Uzyskane wyniki pokazują, że właściwości wytworzonych płyt są związane z ilością zastosowanego preparatu, a stosując odpowiednią ilość preparatu można uzyskać wartości spełniające wymagania odpowiednich norm europejskich.

Słowa kluczowe

EN

fiberboard; HDF; release agent; coat

PL

płyta pilśniowa; HDF; środek antyadhezyjny; powłoka

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2023
• Tom: No. 123
• Strony: 153--163
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Pawlik Julia

• Faculty of Wood Technology, Warsaw University of Life Sciences – SGGW, Warsaw, Poland

autor

Kowaluk Grzegorz

• Department of Technology and Entrepreneurship in Wood Industry, Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences – SGGW, Warsaw, Poland

Bibliografia

• 1. ABDUL KHALIL, H. P. S., BHAT, I. U. H., JAWAID, M., ZAIDON, A., HERMAWAN, D., AND HADI, Y. S. (2012). “Bamboo fibre reinforced biocomposites: A review,” Materials and Design, Elsevier Ltd, 42, 353–368. DOI: 10.1016/j.matdes.2012.06.015.
• 2. ABENGHAL, L., LAMOUDAN, H., AND BROUILLETTE, F. (2023). “Alkylated phosphorylated fibers: A new substitute for silicone in release paper manufacturing,” BioResources, 18(1), 2172–2186. DOI: 10.15376/biores.18.1.2172-2186.
• 3. BADIN, N., CAMPEAN, M., LENGYEL, K., ISPAS, M., AND BEDELEAN, B. (2018). “Property Improvement of Thin High-Density Fiberboard Panels Used as Door-Skins,” BioResources, 13(1), 1042–1054. DOI: 10.15376/biores.13.1.1042-1054.
• 4. BARTOSZUK, K., AND WRONKA, A. (2023). “Influence of the content of recycled artificial leather waste particles in particleboards on their selected properties,” Annals of WULS, Forestry and Wood Technology, 134, 124–134. DOI: 10.5604/01.3001.0053.9129.
• 5. BORYSIEWICZ, I., AND KOWALUK, G. (2023). “Selected properties of MDF boards bonded with various fractions of recycled HDPE particles,” Annals of WULS, Forestry and Wood Technology, 123, 18–29. DOI: 10.5604/01.3001.0053.9306.
• 6. DASIEWICZ, J., AND KOWALUK, G. (2022). “Selected aspects of production and characterization of layered biopolymer composite bonded with a cellulose-based binder,” Annals of WULS - SGGW. Forestry and Wood Technology, 119, 24–34. DOI: 10.5604/01.3001.0016.0519.
• 7. DASIEWICZ, J., AND KOWALUK, G. (2023). “Characteristics of high-density fibreboard produced with the use of rice starch as a binder,” Annals of Warsaw University of Life Sciences SGGW Forestry and Wood Technology, 181, 169–181. DOI: 10.5604/01.3001.0053.9299.
• 8. DU, L., LI, Y., LEE, S., AND WU, Q. (2014). “Water absorption properties of heat-treated bamboo fiber and high density polyethylene composites,” BioResources, 9(1), 1189–1200. DOI: 10.15376/biores.9.1.1189-1200.
• 9. EN 310. (1993). Wood-Based Panels. Determination of Modulus of Elasticity in Bending and of Bending Strength, European Committee for Standardization, Brussels, Belgium.
• 10. EN 317. (1993). “Particleboards and fibreboards - Determination of swelling in thickness after immersion in water,” European Committee for Standardization, Brussels, Belgium.
• 11. EN 382-2. (1993). Fibreboards - Determination of surface absorption - Part 2: Test method for hardboards, European Committee for Standardization, Brussels, Belgium.
• 12. EN 622-5. (2009). Fiberboards. Specifications. Requirements for dry process boards (MDF), European Committee for Standardization: Brussels, Belgium.
• 13. FLORES-YEPES, J. A., PASTOR-PEREZ, J. J., GIMENO-BLANES, F. J., RODRIGUEZ-GUISADO, I., AND FRUTOS-FERNANDEZ, M. J. (2012). “Full recovery of Arundo donax particleboard from swelling test without waterproofing additives,” BioResources, 7(4), 5222–5235. DOI: 10.15376/biores.7.4.5222-5235GHASEMI, I., AND KORD, B. (2009). “Long-term Water Absorption Behaviour of Polypropylene/Wood Flour/Organoclay Hybrid Nanocomposite,” Iranian Polymer Journal, 18(9), 683–691.
• 14. VON GRADOWSKI, S. (2019). “Biogenic Polymers: From Barrier Coatings towards the Design of novel low-adhesive Release Liner,” Darmstadt, <http://tuprints.ulb.tu-darmstadt.de/8579/>.
• 15. HAZIM, M., AMINI, M., HASHIM, R., SULAIMAN, N. S., MOHAMED, M., AND SULAIMAN, O. (2020). “Citric Acid-modified Starch as an Environmentally Friendly Binder for Wood Composite Making,” BioResources, 15(2), 4234–4248. DOI: 10.15376/biores.15.2.4234-4248.
• 16. HOSSEINAEI, O., WANG, S., TAYLOR, A. M., AND KIM, J. W. (2012). “Effect of hemicellulose 163 extraction on water absorption and mold susceptibility of wood-plastic composites,” International Biodeterioration and Biodegradation, Elsevier Ltd, 71, 29–35. DOI: 10.1016/j.ibiod.2011.12.015.
• 17. KARMAKER, A. C., DIBENEDETTO, A. T., AND GOLDBERG, A. J. (1997). “Continuous fiber reinforced composite materials as alternatives for metal alloys used for dental appliances,” Journal of Biomaterials Applications, 11(3), 20–33. DOI: 10.1177/088532829701100304.
• 18. VASILEV, S., VODYASHKIN, A., VASILEVA, D., ZELENOVSKIY, P., CHEZGANOV, D., YUZHAKOV, V., SHUR, V., O’REILLY, E., AND VINOGRADOV, A. (2020). “An investigative study on the effect of pre-coating polymer solutions on the fabrication of low cost anti-adhesive release paper,” Nanomaterials, 10(8), 1–12. DOI: 10.3390/nano10081436.
• 19. WRONKA, A., RDEST, A., AND KOWALUK, G. (2020). “Influence of starch content on selected properties of hardboard,” Annals of Warsaw University of Life Sciences - SGGW, Forestry and Wood Technology, 109, 48–52. DOI: 10.5604/01.3001.0014.3160.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).