Sewability (Based on Needle Penetration Force) of 1 × 1 Rib Knitted Fabrics Produced with Separate Ends of Yarns

• Autorzy: Ala Deniz Mutlu , Bakıcı Gamze Gülşen

Identyfikatory

DOI

10.2478/aut-2019-0007

• Języki publikacji: EN

Abstrakty

EN

Needle penetration force (NPF) is one of the main factors, which is used to determine fabric sewability. In this study, it was aimed to investigate sewability (based on NPF) of 1 × 1 rib knitted fabrics, which were produced by the separate ends of yarns. 18 types of fabrics were knitted with Ne 30/1 yarns with variations of stitch density and number of separate ends, whereas the other parameters were constant. Sewability tests were applied to fabrics after pretreatment and relaxation procedures by using the L&M sewability tester. As a result, it was seen that the number of separate ends and the stitch density have influence on the needle penetration values of 1 × 1 rib knitted fabrics.

Słowa kluczowe

EN

double knit structure; 1 × 1 rib; needle penetration force; sewability

PL

struktura podwójnej dzianiny; siła penetracji igły; szycie

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2019
• Tom: Vol. 19, no. 4
• Strony: 340--346
• Opis fizyczny: Bibliogr. 18 poz.

Twórcy

autor

Ala Deniz Mutlu

• Cukurova University Adana Organized Industrial Zone Vocational School of Technical Sciences, Adana, Turkey, mailing address: Çukurova Üniversitesi Adana Organize Sanayi Bölgesi Teknik Bilimler Meslek Yüksekokulu (01350) Adana/Türkiye

autor

Bakıcı Gamze Gülşen

• Cukurova University Adana Organized Industrial Zone Vocational School of Technical Sciences, Adana, Turkey, mailing address: Çukurova Üniversitesi Adana Organize Sanayi Bölgesi Teknik Bilimler Meslek Yüksekokulu (01350) Adana/Türkiye

Bibliografia

• [1] Chowdhury, M. R. (2016). An investigation on change in physical properties of 1×1 rib weft knitted fabric due to needle drop. Journal of Multidiciplinary Engineering Sciences and Technology, 3(5), 4910-4919.
• [2] Kurbak, A. (2009). Geometrical models for balanced rib knitted fabrics part I: conventionally knitted 1×1 rib fabrics. Textile Research Journal, 79(5), 418-435.
• [3] Nassif, G.A.A. (2013). Dimensional stability and sewing performance of single jersey knitted fabrics. Life Science Journal, 10(1), 1181-1186.
• [4] Behera, B. K., Chand, S. (1997). Sewability of denim. International Journal of Clothing Science and Technology, 9(2), 128-140.
• [5] Abdel Megeid, Z. M., Al-bakry, M., Ezzat, M. (2011). The influence of stitch length of weft knitted fabrics on the sewability. Journal of American Science, 7(8), 610-616.
• [6] Haghighat, E., Etrati, S. M., Najar, S. S. (2014). Evaluation of woven denim fabric sewability based on needle penetration force. Journal of Engineered Fibers and Fabrics, 9(2), 47-60.
• [7] Haghighat, E., Etrati, S. M., Najar, S. S. (2013). Modeling of needle penetration force in denim fabrics. International Journal of Clothing Science and Technology, 25(5), 361-379.
• [8] Gürarda, A., Meriç, B. (2007). The effects of elastane yarn type and fabric density on sewing needle penetration forces and seam damage of PET/elastane woven fabrics. Fibres & Textiles in Eastern Europe, 15, 4(63), 73-76.
• [9] Manich, A. M., Domingues, J. P., Sauri, R. M., Barella, A. (1998). Relationships between fabric sewability and structural, physical, and FAST properties of woven wool and wool-blend fabrics. Journal of the Textile Institute, 89, 1(3), 579-589
• [10] Bakıcı, G. G., Kadem, F. D. (2015). An experimental study about sewability and bending strenght properties of cotton fabrics. Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 30(2), 177-182.
• [11] L&M Sewability Tester Catalogue.
• [12] Sarhan, T.M.AL. (2011). A study of seam performance of micro-polyester woven fabrics. Journal of American Science, 7(12), 41-46.
• [13] Pamuk, O., Kurtoğlu, Ö., Tama, D., Ondoğan, Z. (2011). Sewability properties of lining fabrics. Journal of Textile&Apparel, 21(3), 301-304.
• [14] Yıldız, E.Z., Pamuk, O., Öndoğan, Z. (2011). A study about the effects of interlinings to sewability properties of the woven fabrics. Journal of Textile & Apparel, 21(1), 87-90.
• [15] Gurarda, M., Merıc, B. (2005). Sewing needle penetration forces and elastane fibre damage during the sewing of cotton/elastane woven fabrics. Textile Research Journal, 75(8), 628-633.
• [16] Saied, F., Abdel-megeid, Z.M., Gabry, L.K. (2011). The relation between fabric construction, treatments and sewability. Journal of American Science, 7(3), 818-826.
• [17] İlleez, A. A., Dalbası, E. S., Kayseri, G. Ö. (2015). Improving of sewability properties of various knitted fabrics with the softeners. Social and Behavioral Sciences, 195(2015), 2786-2795.
• [18] Gravas, E., Kiekens, P., Langenhove, L. (2006). Predicting fabric weight per unit area of single and double-knitted structures using appropriate software. Autex Research Journal, 6(4), 223-237.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).