Phase Equilibria in the Bi-In-Sn-Zn System. Thermal Analysis vs. Calculations

• Autorzy: Dębski A. , Onderka B. , Gąsior W. , Gancarz T.

Identyfikatory

DOI

10.1515/amm-2017-0292

• Języki publikacji: EN

Abstrakty

EN

With the use of the differential thermal analysis (DTA), studies of the phase transitions were conducted for 90 of alloys from the quaternary Bi-In-Sn-Zn system and for the constant ratio of Bi:In and Bi:Sn. The studies were conducted for the alloys prepared from the purity metals (Bi, In, Sn, Zn = 99.999 mas. %) by way of melting in a graphite crucible in a glove-box filled with Ar, in which the impurities level was less than 0.1 ppm. After melting and thorough mixing, the liquid alloys were poured out into a graphite test mold. The phase transition temperature data obtained from the DTA investigations were next confronted with those determined from the calculations based on the binary and ternary optimized thermodynamic parameters available in the literature. It was found that the experimental and the calculated phase transition temperatures were in good agreement.

Słowa kluczowe

EN

thermodynamics; differential thermal analysis; quaternary alloys

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 1945--1955
• Opis fizyczny: Bibliogr. 28 poz., tab., wykr., wzory

Twórcy

autor

Dębski A.

• Institute of Metallurgy and Materials Sciences, Polish Academy of Sciences, 30-059 Kraków, 25 Reymonta Str., Poland

autor

Onderka B.

• AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Gąsior W.

• Institute of Metallurgy and Materials Sciences, Polish Academy of Sciences, 30-059 Kraków, 25 Reymonta Str., Poland

autor

Gancarz T.

• Institute of Metallurgy and Materials Sciences, Polish Academy of Sciences, 30-059 Kraków, 25 Reymonta Str., Poland

Bibliografia

• [1] M. E. Loomans, S. Vaynman, G. Ghosh, M. E. Fine, J. Electr. Mater. 23, 741 (1994).
• [2] W. Y. Yoon, J. R. Soh, H. M. Lee, B.-J. Lee, Acta Mater. 45, 951 (1997).
• [3] N. Moelans, K. C. H. Kumar, P. Wollants, J. Alloys Comp. 360, 98 (2003).
• [4] B. Onderka, A. Dębski, W. Gąsior, Arch. Metal. Mater. 60, 567 (2015).
• [5] Z. Li, S. Knott, A. Mikula, Acta Mater. 55, 2417 (2007).
• [6] S. Knott, Z. Li, C.-H. Wang, A. Mikula, Met. Mater. Trans. A 41A, 3130 (2010).
• [7] A. Kroupa, A. T. Dinsdale, A. Watson, J. Vrestal, J. Vízdal, A. Zemanova, JOM 59, 20 (2007).
• [8] V. T. Witusiewicz, U. Hecht, S. Rex, M. Apel, Acta Mater. 53, 3663 (2005).
• [9] S. Rex, B. Böttger, V. T. Witusiewicz, U. Hecht, Mater. Sci. Engin. A413-414, 249 (2005).
• [10] J. Boettinger, U. R. Kattner, K. W. Moon, J. H. Perepezko, Recommended Practice Guide: DTA & Heat-Flux DSC Measurement of Alloy Melting and Freezing, NIST Special Publication 960-15. November 2006”, [http://www.metallurgy.nist.gov/reports/recommendedpractice/SP960_15.pdf book].
• [11] Y.-M. Muggianu, M. Gambino, J.-P. Bros, J. Chim. Phys. 72, 83 (1975).
• [12] A. T. Dinsdale, Calphad 15, 317 (1991).
• [13] O. Redlich, A. T. Kister, Ind. Eng. Chem. Res. 40, 345 (1948).
• [14] H.-L. Chen, E. Doernberg, P. Svoboda, R. Schmid-Fetzer, Thermochim. Acta 512, 189 (2011).
• [15] D. Boa, I. Ansara, Thermochim. Acta 314, 79 (1998).
• [16] A. T. Dinsdale, A. Watson, A. Kroupa, J. Vrestal, A. Zemanova, J. Vizdal, Version 2.0 of the “COST531” Database for the lead-free solders, 2006.
• [17] A. Dinsdale, A. Watson, A. Kroupa, J. Vrestal, A. Zemanova, J. Vizdal, COST 531 – Lead Free Solders. Vol. 1, Atlas of Phase Diagrams for Lead-Free Soldering, European Report COST531, Brno 2008 (ISBN 978-80-86292-28-1).
• [18] S.-L. Chen, F. Zhang, S. Daniel, F.-Y. Xie, X.-Y. Yan, Y.A. Chang, R. Schmid-Fetzer, W. A. Oates, JOM 55, 48 (2003).
• [19] W. Cao, S.-L. Chen, F. Zhang, K. Wu, Y. Yang, Y. A. Chang, R. Schmid-Fetzer, W. A. Oates, Calphad 33, 328 (2009).
• [20] D. V. Malakhov, Calphad 24, 1 (2000).
• [21] J. Vizdal, M. H. Braga, A. Kroupa, K.W. Richter, D. Soares, L. F. Malheiros, J. Ferreira, Calphad 31, 438 (2007).
• [22] B.-J. Lee, Calphad 20, 471 (1996).
• [23] S. W. Yoon, B.-S. Rho, F. M. Lee, B.-J. Lee, Met. Mater. Trans. 30A, 1503 (1999).
• [24] Y. Cui, X. J. Liu, I. Ohnuma, R. Kainuma, H. Ohtani, K. Ishida, J. Alloys Comp. 320, 234 (2001).
• [25] A. Sabbar, A. Zrineh, M. Gambino, J. P. Bros, Thermochim. Acta 369 (1-2), 125 (2001).
• [26] P. Anre's, M. Alaoui-Elbelghiti, M. Gambino, J. P. Bros, Thermochim. Acta 346, 49 (2000).
• [27] V. T. Witusiewicz, U. Hecht, B. Böttger, S. Rex, J. Alloys Comp. 428 (1-2), 115 (2007).
• [28] I. Ansara, A. T. Dinsdale, M. H. Rand, Thermochemical database for light metal alloys, EUR18499, July 1998, 288-289

Uwagi

EN

This research has been supported by grant N N507 4572 37 from the Polish Ministry of Science and Higher Education.

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).