Data processing from the measuring device Ballbar QC20

• Autorzy: Košinár M. , Kuric I.
• Języki publikacji: EN

Abstrakty

EN

The paper presents an innovative method of data processing from the measurement device – Ballbar QC20W. It was created with a program for data transformation (Visual Basic.NET) and it used Fourier transformation. The paper deals with the measuring method of CNC machine tools using Ballbar QC20W. There is an influence between qualitative parameters of machine tools and qualitative parameters of products (tolerances, roughness, etc.). It is very important to hold the stability of qualitative parameters of products as a key factor of production quality. Therefore, is also important to evaluate the accuracy of machine tools and make prediction of possible accuracy.

Słowa kluczowe

EN

data processing; measurement device; CNC machine tools

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2014
• Tom: Vol. 8, nr 21
• Strony: 9--12
• Opis fizyczny: Bibliogr. 8 poz., fig.

Twórcy

autor

Košinár M.

• Department of Automation and Production Systems, Faculty of Mechanical Engineering, University of Žilina, SK-010 26 Žilina, Slovak Republic

autor

Kuric I.

• Department of Automation and Production Systems, Faculty of Mechanical Engineering, University of Žilina, SK-010 26 Žilina, Slovak Republic

Bibliografia

• 1. Aronson R.B. Monitoring the machine. Manufacturing Engineering, 1995.
• 2. Demeč P. Presnosť obrábacích strojov a jej matematické modelovanie. Košice 2001.
• 3. Košinár M. Innovative method of data processing from measurement on Talyrond 73. [In:] 14th International Conference ”Automation in Production Planning and Manufacturing“ Turčianske Teplice, 2013.
• 4. Svoboda O. Volumetric positioning accuracy of a vertical machining center equipped with linear motor drives. Research center of Manufacturing Technology, CVUT.
• 5. Sata A. Error Measurement and Calibration of Five axis CNC machine using ball Bar device. International Conference and Workshop on Emerging Trends in Technology (ICWET 2010) – TCET, Mumbai, India, 2010, p. 660.
• 6. Józwik J., Pieśko P., Krajewski G. Ocena testu QC10 do kontroli off-line obrabiarek sterowanych numerycznie CNC. Eksploatacja i Niezawodność, 3(47), 2010: 10.
• 7. Józwik J. Ocena odchyłki prostopadłości osi obrabiarki sterownej numerycznie z wykorzystaniem systemu QC10 Ballbar. Postępy Nauki i Techniki, 4, 2010: 91-102.
• 8. Beňo M., Zvončan M., Kováč M. Dynamic characteristics of machining of flexible parts. Journal CA Systems in Production Planning, 12, 2012.