PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of temperature gradient on surface texture measurements with the use of profilometry

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents an analysis of influence of ambient temperature changes on the values of parameters in topography measurements with the use of different profilometry techniques. In order to check this, a series of measurements was performed. Two multiprofilometry instruments were used - a contact profilometer, further equipped with an interferometric transducer, and an optical one with a confocal probe. Measurements were performed on first-class flat interferometric glass and on an A-type roughness standard - under different conditions, with simultaneous registration of differences in ambient temperature values. These values were either intentionally changed or the temperature variations were the result of air conditioning control. The performed research showed that - despite the asperities on the surface being really small - there is a relationship between changes of temperature and the results obtained from the measured surface, which in some cases can be seriously distorted.
Rocznik
Strony
53--62
Opis fizyczny
Bibliogr. 11 poz., tab., wykr.
Twórcy
autor
  • Institute of Advanced Manufacturing Technology, 37a Wrocławska St., 30-011 Kraków, Poland
autor
  • Kielce University of Technology, 7 Tysiąclecia Państwa Polskiego Ave., 25-314 Kielce, Poland
  • Kielce University of Technology, 7 Tysiąclecia Państwa Polskiego Ave., 25-314 Kielce, Poland
  • Poznań University of Technology, 3 Piotrowo St., 60-965 Poznań, Poland
autor
  • Institute of Advanced Manufacturing Technology, 37a Wrocławska St., 30-011 Kraków, Poland
autor
  • Poznań University of Technology, 3 Piotrowo St., 60-965 Poznań, Poland
Bibliografia
  • [1] S. Adamczak, T. Miller, J. Świderski, M. Wieczorowski, R. Majchrowski, and A. Łętocha, “A concept of the project: Research and evaluation of reliability of modern methods of surface topography measurements in micro and nano scale”, Proceedings of XIth International Scientific Conference on Coordinate Measuring Technique CMT 2014, pp. 7-9, eds. K. Nikodem and S. Płonka, Bielsko-Biała, 2015.
  • [2] S. Adamczak, T. Miller, J. Świderski, M. Wieczorowski, R. Majchrowski, and A. Łętocha, “The assumptions to credibility assessment of surface topography measurements in various scales”, Mechanic 3, 81-87 (2015), [in Polish].
  • [3] ISO 5436‒2: Geometrical product specification (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards, 2012.
  • [4] ISO 25178‒70: Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Physical measurement standards, 2014.
  • [5] P. Pawlus, M. Wieczorowski, and T. Mathia, The Errors of Stylus Methods in Surface Topography Measurements, ZAPOL, Szczecin, 2014.
  • [6] R.K. Leach, C.L. Giusca, H. Haitjema, C. Evans, X. Jiang, “Calibration and verification of areal surface texture measuring instruments”, CIRP Annals - Manufacturing Technology 64 (2), 545-548 (2015).
  • [7] R. Leach, “The measurement of surface texture using stylus instruments”, in Measurement Good Practice Guide, No. 37, Engineering Measurement Division National Physical Laboratory, 2014.
  • [8] D.J. Whitehouse, “A revised philosophy of surface measuring systems”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 202 (3), 169-185 (1988).
  • [9] K.M. Baird, “Compensation for linear thermal expansion”, Metrologia 4, 145-146 (1968).
  • [10] A.D. Khazan, Transducers and Their Elements. Design and Application, PTR Prentice Hall, Englewood Cliffs, NJ, 1994.
  • [11] N.K.P. Neubert, Instrument Transducers: An Introduction to Their Performance and Design, Oxford University Press, Oxford, 1963.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-e76e58e4-3f91-479f-81ab-072922bb0bb7
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.