Szacowanie sił przeciskowych w metodzie DSPT (Direct Pipe)

• Autorzy: Staheli Kimberlie
• Języki publikacji: PL

Słowa kluczowe

PL

hybrydowa metoda wiertnicza; DSPT; rurociąg

EN

Direct Steerable Pipe Thrusting; DSPT; pipeline

• Wydawca: Wydawnictwo INŻYNIERIA Spółka z o.o.
• Czasopismo: Inżynieria Bezwykopowa
• Rocznik: 2023
• Tom: nr 2
• Strony: 84--91
• Opis fizyczny: Bibliogr. 14 poz., rya., wykr.

Twórcy

autor

Staheli Kimberlie

• Staheli Trenchless Consultants, Seattle, USA

Bibliografia

• [1] Goerz S.: Evaluation of Methods Used to Estimate The Required Thrust Force For Direct Pipe Installation with Clayey Soil Based on Case Studies. A thesis in partial fulfillment of a master’s degree at the University of Alberta, Department of Civil and Environmental Engineering. 2019.
• [2] Hair J.D. and Associates, Cappozoli L.J. and Associates, and Stress Engineering Services: „Installation of Pipelines by Horizontal Directional Drilling, An Engineering Design Guide”, prepared for the Offshore and On-Shore Design Applications Supervisory Committee of the Pipeline Research Committee at the American Gas Association, 1995.
• [3] Pfeff D.: (2013) Overview of Thrust Forces Needed on Realized Direct Pipe Projects, Herrenknecht AG, 2013.
• [4] Pruiksma J. P., Pfeff D., Kruse H. M. G.: „The Calculation of the Thrust Force for Pipeline Installation Using the Direct Pipe Method”, Proceedings of the Pipeline Technology Conference, 2012.
• [5] Rabiei M.: et al (2018) Analysis and Design of Pipes Installed via Direct Pipe Technology, NASTT No-Dig Conference Proceedings, Paper WM-T4-02.
• [6] Reilly C., Orr T.: „Physical modelling of the effect of lubricants in pipe jacking”, Elsevier Manuscript Number 2ac735f7e295513b6e45d33873e63247, 2016.
• [7] Robison J.L., Chen C.: „Considering Buckling - Direct Pipe Engineering Design”, Proceeds of the 2017 North American Society for Trenchless Technology International No-Dig Show, Washington, D.C., April 9-12, 2017.
• [8] Robison J., Hotz R. D., Chen C.: Emerging Technologies: A suggested Design Method for Curved, Jacked Steel Pipe. Proceedings of the 2013 ASCE Pipelines Conference, 2019.
• [9] Robison J., Hotz R.: Direct Pipe – Estimated and Actual Load Installation Analyses for 20 Crossings, NASTT No-Dig Conference Proceedings, Paper TM2-T5-04, 2014.
• [10] Robinson J.R., Englehardt J., Shepherd J.: „Direct Pipe Feasibility and Planning Industry Trends”, Proceedings of the NASTT 2021 No-Dig Show, March 28 - April 1, 2021. Orlando, FL.
• [11] Robison J., Wilson J.: „Sabine Naches Levee Crossing Direct Pipe. Engineering and Permitting”. Proceeds of the 2016 North American Society for Trenchless Technology No-Dig Show, Dallas, TX. March 20-24, 2016.
• [12] Smith M., Tolke T.: „Crossing the Calumet: Complications and Logistics for the Execution of a Horizontal Curve during a 36-inch Direct Pipe Installation”. Proceedings of the 2019 North American Society for Trenchless Technology No-Dig Show, Chicago, Illinois, March 17-20, 2019.
• [13] Sparks A.E., Hotz R.D.: „Direct Pipe - Installation Force Evaluation of Recent Direct Pipe Installation”, Proceedings of the ASCE Pipelines Conference, 2019.
• [14] Staheli K.: Estimation of Jacking Forces using an Interface Friction Model based on Pipe Surface Roughness. Dissertation in partial fulfillment of the degree of Ph.D., Georgia Institute of Technology, Department of Civil and Environmental Engineering, 2006.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).