Main incompatibilities of soldering process in automotive industry

• Autorzy: Szczucka-Lasota Bożena , Węgrzyn Tomasz , Garbala Krzysztof , Piwnik Jan , Majewski Wojciech

Identyfikatory

DOI

10.20858/tp.2019.14.2.2

• Języki publikacji: EN

Abstrakty

EN

Electronic systems are very important part of the automotive industry. Electronic products have high reliability due to the critical functions performed by some of the modern modules. Cyclic mechanical load and vibration are main of the conditions, that the electronic modules are subjected during the transport. In this paper, the main incompatibilities in the internal transport processes of soldering of selected elements for automotive company are presented. The main purpose of the article is to identify the causes of these nonconformities. The source of the cause of nonconformity was determined by means of quality tools and methods: 5 WHY analysis or modified p-FMEA analysis. The results obtained from the presented investigations enable the elaboration solutions for the transport process inside the analyzed company. The presented solutions are the result of eliminating or limiting the amount of nonconformities in the analyzed process. The important expectations of solutions are presented. The proposed solutions are the result of eliminating or limiting the amount of non-conformities in the analyzed process on the soldering line.

Słowa kluczowe

EN

internal transport; automotive; soldering; incompatibilities

PL

transport wewnętrzny; motoryzacja; lutowanie; niezgodności

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Transport Problems
• Rocznik: 2019
• Tom: T. 14, z. 2
• Strony: 19--28
• Opis fizyczny: Bibliogr. 15 poz.

Twórcy

autor

Szczucka-Lasota Bożena

• Silesian University of Technology Krasińskiego 8, 40-019 Katowice, Poland

autor

Węgrzyn Tomasz

• Silesian University of Technology Krasińskiego 8, 40-019 Katowice, Poland

autor

Garbala Krzysztof

• AC SA - Centrum Badań i Rozwoju 42 Pułku Piechoty 50, 15-181 Białystok, Poland

autor

Piwnik Jan

• Road and Bridge Research Institute Instytutowa 1, 03-302 Warszawa, Poland

autor

Majewski Wojciech

• AM&HP Suwałki Lutostańskiego 6/3, 16-400 Suwałki, Poland

Bibliografia

• 1. Philips, A.L. Welding Handbook. Vol. 2. Chapter 13 Soldering. American Welding Society. London, 2012. 230 p.
• 2. Wang, T.H. & Lai, Y.-S. Submodeling analysis for path-dependent thermomechanical problems J. Electron. Packag. 2004. Vol. 127. No. 2. P. 135-140.
• 3. Common Soldering Problems. Available at: https://learn.adafruit.com/adafruit-guide-excellentsoldering/common-problems.
• 4. Lai, Y.-S. & Wang, T.H. Verification of submodeling technique in thermomechanical reliability of flip-chip package assembly. Microelectron. Reliab. 2004. Vol. 45. P. 575-582.
• 5. Mendy, A. & Gasana J. & Forno E. & et al. Work-related respiratory symptoms and lung function among solderers in the electronics industry: a meta-analysis. Environ Health Prev Med. 2012. Vol. 17(3). P. 183-90.
• 6. Okpala, C.Ch. & Chima, S.A. & Ezeanyim, O. The Application of Tools and Techniques of Total Productive Maintenance in Manufacturing. International Journal of Engineering Science and Computing. 2018. Vol. 8. No. 6. P. 18115-18121.
• 7. Serrat, O. The Five Whys Technique. Cornell University ILR School. 2009.
• 8. Banduka, N. & Tadić, D. & Mačužić, I. & et al. Extended process failure mode and effect analysis (PFMEA) for the automotive industry: The FSQC‐PFMEA. Advances in Production Engineering & Management. 2018. Vol. 13. No. 2. P. 206-215.
• 9. Baynal, K. & Sarı, T. & Akpinar, B. Risk management in automotive manufacturing proces based on FMEA and grey relational analysis: A case study. Advances in Production Engineering & Management. 2018. Vol. 13. No. 1. P. 69- 80.
• 10. Midor, K. An analysis of the causes of product defects using quality management tools. Management Systems in Production Engineering. 2014. Vol. 14. No. 4. P. 162-167.
• 11. Tague, N.R. The Quality Toolbox, Second Edition, ASQ Quality Press. 2004. P. 236-240.
• 12. Towill, D.R. Simplicity wins: twelve rules for designing effective supply chain control. The Institute of Operations Management. 1999. Vol. 25. No. 2. P. 9-13.
• 13. Vinodh, S. & Santhosh, D. Application of FMEA to an automotive leaf spring manufacturing organization. The TQM Journal. 2012. Vol. 24. No. 3. P. 260-274.
• 14. Belu, N. & Rachieru, N. & Militaru, E. & et al. Application of FMEA method in product development stage. Academic Journal of Manufacturing Engineering. 2012. Vol. 10. No. 3. P. 1-4.
• 15. Potential Failure Mode and Effects Analysis in Design (Design FMEA) and Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA) and Effects Analysis for Machinery (Machinery FMEA). SAE International 2008. Available from: https://quality-one.com/fmea/.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).