Thin SnO2 Films Manufactured Via the Sol-Gel and Electrospinning Methods

• Autorzy: Matysiak W. , Tański T. , Smok W. , Polishchuk O.

Identyfikatory

DOI

10.24425/amm.2020.132817

• Języki publikacji: EN

Abstrakty

EN

The aim of this work was to produce a thin SnO₂ film by a technique combining the sol-gel method and electrospinning from a solution based on polyvinylpyrrolidone and a tin chloride pentahydrate as a precursor. The spinning solution was subjected to an electrospinning process, and then the obtained nanofiber mats were calcined for 10 h at 500°C. Then, the scanning electron microscopy morphology analysis and chemical composition analysis by X-ray microanalysis of the manufactured thin film was performed. It was shown that an amorphous-crystalline layer formed by the SnO₂ nanofiber network was obtained. Based on the UV-Vis spectrum, the width of the energy gap of the obtained layer was determined.

Słowa kluczowe

EN

thin films; nanofibers; tin oxide; electrospinning; optical properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 761--765
• Opis fizyczny: Bibliogr. 30 poz., fot., rys., tab.

Twórcy

autor

Matysiak W.

• Silesian University of Technology, Department of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Tański T.

• Silesian University of Technology, Department of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Smok W.

• Silesian University of Technology, Department of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Polishchuk O.

• Khmelnytskyi National University, Department of Machines and Apparatus, Electromechanical and Power Systems, Khmelnytskyi, Ukraine

Bibliografia

• [1] C. Lu, Z. Chen, Int. J. Hydrog. Energia. 35 (22), 12561-12567 (2010).
• [2] C. Y. Tsay, K. C. Pai, Thin Solid Films 654, 11-15 (2018).
• [3] B. Zhao, F. Mattelaer, J. Kint, A. Werbrouck, L. Henderick, M. Minjauw, C. Detavernier, Electrochim. Acta 320, 134604 (2019).
• [4] K. S. Anuratha, H. S. Peng, Y. Xiao, T. C. Wei, J. Y. Lin, Electrochim. Acta 295, 662-667 (2019).
• [5] C. D. Lokhande, D. P. Dubal, O. S. Joo, Curr. Appl Phys. 11 (3), 255-270 (2011).
• [6] Q. Wang, X. Li, W. M. Zhao, S. Jin, Appl. Surf. Sci. (2019).
• [7] X. H. Shi, K. J. Xu, Mater. Sci. Semicond. Process 58, 1-7 (2017).
• [8] I. M. El Radaf, T. A. Hameed, T. M. Dahy, Ceram. Int. 45 (3), 3072-3080 (2019).
• [9] M. J. Mortelliti, A. N. Wang, J. L. Dempsey, Polyhedron 171, 433-447 (2019).
• [10] J. C. Manifacier, M. De Murcia, J. P. Fillard, E. Vicario, Thin Solid Films. 41, 127-144 (1977).
• [11] T. M. Al-Saadi, B. H. Hussein, A. B. Hasan, A. A. Shehab, Energy Procedia. 157, 457-465 (2019).
• [12] H. Hartnagel, (Eds.), Semiconducting transparent thin films, CRC Press (1995).
• [13] J. H. Bang, M. Lee, A. Mirzaei, M. S. Choi, H. G. Na, C. Jin, Y. Choi, Ceram. Int. 45 (6), 7723-7729 (2019).
• [14] S. P. Choudhury, S. D. Gunjal, N. Kumari, K. D. Diwate, K. C. Mohite, A. Bhattacharjee, Mater. Today: Proc. 3 (6), 1609-1619 (2016).
• [15] P. M. Mwathe, R. Musembi, M. Munji, B. Odari, L. Munguti, A. A. Ntilakigwa, B. Muthoka, Int. J. Mater. Sci. App. 3 (5), 137-142 (2014).
• [16] S. Baco, A. Chik, F.M. Yassin, J. Sci. Tech. 4(1) (2012).
• [17] Z. H. Bakr, Q. Wali, J. Ismai, N. K. Elumalai, A. Uddin, R. Jose, Electrochim. Acta 263, 524-532 (2018).
• [18] K. Wang, Z. Qian, Z. Guo, Mater. Res. Bull. 111, 202-211 (2019).
• [19] S. Das, V. Jayaraman, Prog. Mater. Sci. 66, 112-255 (2014).
• [20] Z. Lounis, M. H. Bouslama, C. Zegadi, D. Ghaffor, A. Baizid, M. S. Halati, A. Ouerdane, J. Electron. Spectrosc. 226, 9-16 (2018).
• [21] W. Matysiak, T. Tański, W. Smok, Sol. St. Phen. 293, 35-49 (2019).
• [22] R. D. Vispute, V. P. Godbole, S. M. Chaudhari, S. M. Kanetkar, S. B. Ogale, J. Mater. Res. 3 (6), 1180-1186 (1988).
• [23] Z. Li, C. Wang, One-dimensional nanostructures: electrospinning technique and unique nanofibers. Heidelberg/New York/Dordrecht/London: Springer (2013).
• [24] N. Dharmaraj, C. H. Kim, K. W. Kim, H. Y. Kim, E. K. Suh, Spectrochim. Acta Part A. 64 (1), 136-140 (2006).
• [25] Y. Zhang, X. He, J. Li, Z. Miao, F. Huang, Sensor. Actuat. B-Chem. 132 (1), 67-73 (2008).
• [26] Y. J. Park, K. Asokan, S. W. Choi, S. S. Kim, Sensor. Actuat. B-Chem. 152 (2), 254-260 (2011).
• [27] S. I. Boyadjiev, O. Kéri, P. Bárdos, T. Firkala, F. Gáber, Z. K. Nagy, I. M. Szilágyi, App. Surf. Sci. 424, 190-197 (2017).
• [28] J. Tauc, R. Grigorovici, A. Vancu, Phys. Status Solidi B. 15 (2), 627-637 (1966).
• [29] W. Matysiak, T. Tański, App. Surf. Sci. 474, 232-242 (2019).
• [30] T. Tański, W. Matysiak, B. Hajduk, Beilstein J. Nanotechnol. 7 (1), 1141-1155 (2016).

Uwagi

EN

1. The research presented in this paper was financed by the National Science Centre, Poland based on the decision number 2016/23/B/ST8/02045.

PL

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).