Prediction and Optimization of Magnetic Properties of Laser Welded AISI 430 Stainless Steels

• Autorzy: Mostaan H. , Rafiei M.

Identyfikatory

DOI

10.24425/amm.2018.125092

• Języki publikacji: EN

Abstrakty

EN

The AISI 430 stainless steel with ferritic structure is a low cost material for replacing austenitic stainless steel because of its higher yield strength, higher ductility and also better polarisation resistance in harsh environments. The applications of AISI 430 stainless steel are limited due to insignificant ductility and some undesirable changes of magnetic properties of its weld area with different microstructures. In this research, a study has been done to explore the effects of parameters of laser welding process, namely, welding speed, laser lamping current, and pulse duration, on the coercivity of laser welded AISI 430 stainless steel. Vibrating sample magnetometery has been used used to measure the values of magnetic properties. Observation of microstructural changes and also texture analysis were implemented in order to elucidate the change mechanism of magnetic properties in the welded sections. The results indicated that the laser welded samples undergo a considerable change in magnetic properties. These changes were attributed to the significant grain growth which these grains are ideally oriented in the easiest direction of magnetization and also formation of some non-magnetic phases. The main effects of the above-mentioned factors and the interaction effects with other factors were evaluated quantitatively. The analysis considered the effect of lamping current (175-200 A), pulse duration (10-20 ms) and travel speed (2-10 mm/min) on the coercivity of laser welded samples.

Słowa kluczowe

EN

AISI 430; response surface methodology; laser welding; magnetic properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 4
• Strony: 1673--1682
• Opis fizyczny: Bibliogr. 15 poz., fot., rys., tab., wzory

Twórcy

autor

Mostaan H.

• Department of Materials Engineering and Metallurgy, Faculty of Engineering, Arak University, Arak 38156-8-8349, Iran

autor

Rafiei M.

• Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

Bibliografia

• [1] G. Mallaiah, P. R. Reddy, A. Kumar, Procedia Mater. Sci. 6, 1740-1751 (2014).
• [2] M. O. H. Amuda, S. Mridha, Mater. Des. 47, 365-371 (2013), doi:10.1016/j.matdes.2012.12.008.
• [3] K. D. Lippold JC, Welding metallurgy and weldability of stainless steels, John Wiley & Sons, New Jersey, 2005.
• [4] K. D. Ramkumar, A. Chandrasekhar, A. K. Singh, S. Ahuja, A. Agarwal, N. Arivazhagan, A. M. Rabel, J. Manuf. Process. 20, 54-69 (2015).
• [5] P. Oxley, J. Goodell, R. Molt, J. Magn. Magn. Mater. 321, 2107-2114 (2009).
• [6] G. Mallaiah, A. Kumar, P. Ravinder Reddy, G. Madhusudhan Reddy, Mater. Des. 36, 443-450 (2012).
• [7] L. Battistini, R. Benasciutti, A. Tassi, J. Magn. Magn. Mater. 133, 603-606 (1994).
• [8] M. O. H. Amuda, S. Mridha, Adv. Mater. Res. 86, 1165-1172 (2010).
• [9] M. B. Bilgin, C. Meran, O. E. Canyurt, Int. J. Adv. Manuf. Technol. 77, 2221-2233 (2014).
• [10] S. Kou, Welding Metallurgy, 2003. doi:10.1016/0022-4596(88)90042-4.
• [11] M. Alizadeh-Sh, S. P. H. Marashi, M. Pouranvari, Mater. Des. 56, 258-263 (2014).
• [12] V. A. Ventrella, J. R. Berretta, W. de Rossi, J. Mater. Process. Technol. 210, 1838-1843 (2010).
• [13] V. A. Ventrella, J. R. Berretta, W. de Rossi, Phys. Procedia. 12, 347-354 (2011).
• [14] Q. Han, D. Kim, D. Kim, H. Lee, N. Kim, J. Mater. Process. Technol. 212, 1116-1122 (2012).
• [15] R. Myers, D. Montgomery, C. Anderson-Cook, Response Surface methodology: process and product optimization using designed experiments, John Wiley & Sons, New Jersey, 2009.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).