Introduction to non-linear Thermal-FSI on the example of transient load of a thin-walled container

• Autorzy: Kraszewski B.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the problems associated with the transient thermal load of structures exhibiting a non-linear relationship between load and strain. The mathematical model required to comprehensively describe the relationship between fluid and solid has been shown from different perspectives. In addition, the Newton-Raphson method has been referred to as a way of solving nonlinear equations. The article also presents the assumptions and results of numerical analysis of thin-walled container thermally loaded by contact with hot water. The conclusions drawn emphasize the importance of Thermal-FSI tools, especially in the power engineering sector.

Słowa kluczowe

EN

thermal-FSI; CFD; computational fluid dynamics; CSD; computational solid dynamics; non-linear mechanics

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Zeszyty Energetyczne
• Rocznik: 2018
• Tom: T. 5
• Strony: 1--13
• Opis fizyczny: Bibliogr. 20 poz., rys., wykr.

Twórcy

autor

Kraszewski B.

• Institute of Fluid-Flow Machinery Polish Academy of Sciences, Energy Conversion Department

Bibliografia

• [1] Aravas N., On the Numerical Integration of a Class of Pressure-Dependent Plasticity Models, International Journal for Numerical Methods in Engineering 24 (7), 1395-1416, 1987.
• [2] Badur J., Development of the concept of energy. IFFM PAS, Gdańsk 2009.
• [3] Badur J., Five lectures from modern fluid termomechanics. CUT script (in Polish), www.imp.gda.pl, Gdańsk, 2002.
• [4] Badur J., Bryk M., Ziółkowski P., Sławiński D., Ziółkowski P. J., Kornet S., Stajnke M., On a comparison of Huber-Mises-Hencky with Burzynski-Pecherski equivalent stresses for glass body during nonstationary thermal load, AIP Conference Proceedings 1822, 2017.
• [5] Badur J., Karcz M., Kucharski R.,Wisniewski A. and Kekana M., Coupled Modelling of the Cooling Processes and the Induced Thermo-Corrosive Fatigue within a Gas Turbine,[in:] State of Art on Gas Turbine Research in Poland, Editor T. Uhl, Cracow TU Press, 19-30, 2003.
• [6] Badur J., Karcz M., Lemański M., On the mass and momentum transport in the Navier-Stokes slip layer, Microfluid Nanofluid 11, 439-449, 2011.
• [7] Badur J., Ziółkowski P., Kornet S., Kowalczyk T., Banaś K., Bryk M., Ziółkowski P. J., Stajnke M., Enhanced energy conversion as a result of fluid-solid interaction in micro- and nanoscale, Journal of Theoretical and Applied Mechanics 56, 329-332, 2018.
• [8] Badur J., Ziółkowski P., Kornet S., Stajnke M., Bryk M., Banaś K., Ziółkowski P. J., The effort of the steam turbine caused by a flood wave load, AIP Conference Proceedings 1822, 2017.
• [9] Badur J., Ziółkowski P., Zakrzewski W., Sławiński D., Banszkiewicz M., Kaczmarczyk O., Kornet S., Kowalczyk T., Ziółkowski P. J. On the surface vis impressa caused by a fluid-solid contact, Shell Structures: Theory and Applications Vol. 3, 53-57, 2014.
• [10] Badur J., Ziółkowski P., Zakrzewski W., Sławiński D., Kornet S., Kowalczyk T., Hernet J., Piotrowski R., Felicjancik J. and Ziółkowski P.J., An advanced Thermal-FSI approach to flow heating/cooling, Journal of Physics: Conference Series 530, 2014.
• [11] Banaś K., Badur J., Influence of strength differential effect on material effort of a turbine guide vane based on thermoelastoplastic analysis, Journal of Thermal Stresses 40, 1368-1385, 2017.
• [12] Bathe K. J., Finite element procedures. Englewood Cliffs, N.J., London 1996.
• [13] Bilicki Z., Badur J., A Thermodynamically consistent relaxation model for turbulent, binary mixture undergoing phase Transition. Journal of Non-Equilibrum Thermodynamics 28, 1-30, 2003.
• [14] Dudda W., Numerical analysis of a structure subject to corrosion degradation. Bulletin of the IFFM No. 537/1496 (in Polish), Gdańsk 2005.
• [15] Felicjancik J., Ziółkowski P., Badur J., An advanced thermal-FSI approach of an evaporation of air heat pump. Transactions of IFFM 129, 111-141, 2015.
• [16] Kornet S., Badur J., Non-equilibrium phase transitions. Logistyka 4 (in Polish), 225-233, 2013.
• [17] McMeeking R. M., Rice J. R., Finite-Element Formulations for Problems of Large Elastic-Plastic Deformation, International Journal of Solids and Structures 11 (5), 601-616, 1975.
• [18] Sławiński D., Start-up and shut-down steam turbine with used elasto-plastic material adaptation, PhD thesis, IFFM PAS, Gdańsk 2015.
• [19] Zakrzewski W., Validation of the wet steam model by comparison with the experiment, Modern technologies and energy conversion, Publisher Mechanical Department (in Polish), Gdańsk 2011.
• [20] Zakrzewski W., Karcz M., Kornet S., Estimation of the steam condensation flow via CFD methods, Transactions of IFFM 124, 111-124, 2012.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).