Analysis and monitoring of electrical grounding grid encapsulated with concrete: case study using simulation in finite element method

• Autorzy: Pereira T. M. , Lima R. , Gomes V. M. , Calixto W. P. , Alves A. J.

Identyfikatory

DOI

10.22149/teee.v2i2.99

• Konferencja: International Conference on Environment and Electrical Engineering (17 ; 06-09.06.2017 ; Milan, Italy)
• Języki publikacji: EN

Abstrakty

EN

This work study the influence of concrete, plaster, clay and others buried structures in grounding systems. Comparison of soil characteristics between dry and rainy seasons on different grounding systems. The study includes comparison of six different grounding system on dry season and wet season. Simulations in finite element method was performed for tree layer stratified soil and the electrostatic equipotential surfaces were mapped into the region of interest.

Słowa kluczowe

EN

grounding systems; finite elements method

• Wydawca: EEEIC International Publishing
• Czasopismo: Transactions on Environment and Electrical Engineering
• Rocznik: 2017
• Tom: Vol. 2, No. 2
• Strony: 31--36
• Opis fizyczny: Bibliogr. 18 poz., rys., tab.

Twórcy

autor

Pereira T. M.

• Federal Institute of Goiás Federal University of Goiás, Brazil

autor

Lima R.

• Federal Institute of Goiás Federal University of Goiás, Brazil

autor

Gomes V. M.

• Federal Institute of Goiás Federal University of Goiás, Brazil

autor

Calixto W. P.

• Federal Institute of Goiás Federal University of Goiás, Brazil

autor

Alves A. J.

• Federal Institute of Goiás Federal University of Goiás, Brazil

Bibliografia

• [1] O. Vicente, “Study on the electrical behavior of concrete used in structural grounding systems,” 2010.
• [2] A. Nadler and H. Frenkel, “Determination of soil solution electrical conductivity from bulk soil electrical conductivity measurements by the four-electrode method,” Soil Science Society of America Journal, vol. 44, no. 6, pp. 1216-1221, 1980.
• [3] P.W. Rowland, “Industrial system grounding for power, static, lightning and instrumentation, practical applications,” in Textile, Fiber and Film Industry Technical Conference, 1995., IEEE 1995 Annual. IEEE, 1995, pp. 1-6.
• [4] L. Cong-Li and P. Minfang, “A new approach for monitoring grounding grid of electrical power system,” in Electronic Measurement and Instruments, 2007. ICEMI’07. 8th International Conference on. IEEE, 2007, pp. 4-419.
• [5] W.P. Calixto, “Mathematical and computational methods applied to geoelectric prospecting with threedimensional stratification,” In portuguese Ph.D. dissertation, 2012.
• [6] J.B.J. Pereira, “Modeling of uncertainties in electrical grounding systems” In portuguese 2008.
• [7] W.P. Calixto, L.M. Neto, M. Wu, H.J. Kliemann, S.S. de Castro, and K. Yamanaka, “Calculation of soil electrical conductivity using a genetic algorithm,” Computers and Electronics in Agriculture, vol. 71, no. 1, pp. 1-6, 2010.
• [8] E.J. Fagan and R.H. Lee, “The use of concrete-enclosed reinforcing rods as grounding electrodes,” Industry and General Applications, IEEE Transactions on, no. 4, pp. 337-348, 1970.
• [9] J. Preminger, “Evaluation of concrete-encased electrodes,” Industry Applications, IEEE Transactions on, no. 6, pp. 664-668, 1975.
• [10] T.R. Brinner, J.D. Atkins, and M.O. Durham, “Electric submersible pump grounding,” Industry Applications, IEEE Transactions on, vol. 40, no. 5, pp. 1418-1426, 2004.
• [11] M. Santos, W. Cunha, and A. Nascimento, “Infrastructure in systems of Communication Technology”, vol. 1, no. 1, 2010.
• [12] G. Kindermann and J.M. Campagnolo, “Grounding Systems ” In portuguese. Sagra- DC Luzzatto, 1992.
• [13] J. Paknahad, K. Sheshyekani, F. Rachidi, and M. Paolone, “Lightning electromagnetic fields and their induced currents on buried cables. Part ii: The effect of a horizontally stratified ground,” IEEE Transactions on Electromagnetic Compatibility, vol. 56, no. 5, pp. 1146-1154, Oct 2014.
• [14] Y. Wang, R. Chen, S. Lin, J. Tian, J. Li, and M. Chen, “Calculation and analysis of the current carrying capability of electric cable based on finite element method,” in Electrical Insulation and Dielectric Phenomena, 2009. CEIDP ’09. IEEE Conference on, Oct 2009, pp. 307-310.
• [15] J.A. Guemes and F.E. Hernando, “Method for calculating the ground resistance of grounding grids using fem,” IEEE Transactions on Power Delivery, vol. 19, no. 2, pp. 595-600, April 2004.
• [16] A. Habjanic and M. Trlep, “The simulation of the soil ionization phenomenon around the grounding system by the finite element method,” IEEE Transactions on Magnetics, vol. 42, no. 4, pp. 867-870, April.
• [17] MA, Jinxi; DAWALIBI, Farid P. Extended analysis of ground impedance measurement using the fall-of-potential method. IEEE Transactions on Power Delivery, v. 17, n. 4, p. 881-885, 2002.
• [18] MA, Jinxi; DAWALIBI, Farid P. Influence of inductive coupling between leads on ground impedance measurements using the fall-of-potential method. IEEE Transactions on Power Delivery, v. 16, n. 4, p. 739-743, 2001.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).