The structure of composite rollers with iron or nickel-iron base and hard surface layer of WC or TiC based hard alloy produced by the method of hot vacuum pressing with a liquid phase

• Autorzy: Kaverinskiy Vladislav , Sukhenko Zoya

Identyfikatory

DOI

10.2478/amtm-2020-0004

• Języki publikacji: EN

Abstrakty

EN

In this work the structure and properties of composite rollers with surface layer made of hard alloy were studied. The rollers were made by the powder metallurgy method with sintering during pressing and the presence of a certain liquid phase during sintering (semi-liquid sintering). WC-Co and TiC-Ni-Fe materials were used as hard alloys. Iron-carbon and iron-nickel materials were used as soft base. All of the composite layers were formed in one process. The structure of base materials and border layer of these composites were studied. Investigations of thermocycling sustainability of these composite samples were carried out.

Słowa kluczowe

EN

composite rollers; iron-nickel materials; powder metallurgy; hard alloy; thermocycling sustainability

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Archives of Mechanical Technology and Materials
• Rocznik: 2020
• Tom: Vol. 40
• Strony: 20--29
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Kaverinskiy Vladislav

• Department of Abrasion-and Corrosion-Resistant Powder Construction Materials,Frantsevich Institute for Problems of Materials Science, Krzhizhanovsky str., 3,Kiev-142 03680, Ukraine

autor

Sukhenko Zoya

• Department of Abrasion-and Corrosion-Resistant Powder Construction Materials,Frantsevich Institute for Problems of Materials Science, Krzhizhanovsky str., 3,Kiev-142 03680, Ukraine

Bibliografia

• [1] Deshpande M.V., Saxena J.P., Kumar P., Basu S., Sebardt W., Development of guide roller material for steel wire-rod mill, International journal of refractory metals and hard materials, 15 (1997), 151-155.
• [2] Cassard J.J., Cassard, J., Lachenal, G., Romagnolo, Composite guide roller for a rolling mill [Electronic resource], (1977), Resource access mode: https://patentimages.storage.googleapis.com/cd/72/b4/92b396e130b0be/US4056873.pdf
• [3] Zhigang Z. F., Oladapo O. E., Liquid phase sintering of functionally graded WC-Co composites, Scripta Materialia, 52 (2005), 785 - 791.
• [4] Bulanov V. Ya., Kozhevnikov V. I., Pluzhnikov V. A., Structure and properties of iron-graphite materials alloyed with nickel and phosphorus, Soviet Powder Metallurgy and Metal Ceramics, 6 (1967), 208 - 210.
• [5] Lyakishev N.P. Diagrams of the state of double metal systems: Handbook. Vol. 2., Mechanical engineering, Moscow (1996). (in Russian).
• [6] Van Der Voort G. F. Metallography principles and practice, ASM International, New York (1999).
• [7] Novikov I.I. Theory of heat treatment of metals, Metallurgy, Moscow 1986. (in Russian).

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).