Influence of filling type on strength of parts manufactured by Fused Deposition Modelling

• Autorzy: Górski F. , Wichniarek R. , Kuczko W.
• Języki publikacji: EN

Abstrakty

EN

Fused Deposition Modelling technology allows to produce elements of very complex shapes without any additional tooling, which is why it has a broad range of industrial applications. Possibility of manufacturing parts with controlled degree of internal filling allows to shorten the manufacturing time and reduce volume of used material. The paper presents influence of layer filling type on part capability of carrying loads and economical coefficients of the manufacturing process. A problem of mechanical properties is important especially in case of elements used as functional prototypes. The paper presents methodology and results of experimental strength tests of samples with various types of internal filling. As a build material for test samples, ABS material was used. Composite samples were also used the ABS matrix produced by Fused Deposition Modelling was filled with chemically hardening polyurethane resin in a process developed by authors. The samples were subjected to destructive testing and their strength properties were compared.

Słowa kluczowe

EN

rapid prototyping; fused deposition modelling; strength tests

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2014
• Tom: Vol. 14, No. 3
• Strony: 113--125
• Opis fizyczny: Bibliogr.14 poz., tab., rys.

Twórcy

autor

Górski F.

• Katedra Zarządzania i Inżynierii Produkcji, Politechnika Poznańska, Poland

autor

Wichniarek R.

• Katedra Zarządzania i Inżynierii Produkcji, Politechnika Poznańska, Poland

autor

Kuczko W.

• Katedra Zarządzania i Inżynierii Produkcji, Politechnika Poznańska, Poland

Bibliografia

• [1] CHUA C.K., LEONG K.F., LIM C.S., 2003, Rapid prototyping: Principles and applications, World Scientific Publishing, Singapore, 420.
• [2] PAJĄK E., GÓRSKI F., WICHNIAREK R., DUDZIAK A., 2011, Incremental techniques and virtual reality in the process of preparation of production, Promocja 21, Poznań, ISBN-978-83-86912-56-8, (in Polish).
• [3] GÓRSKI F., WICHNIAREK R., KUCZKO W., 2013, Influence of process parameters on dimensional accuracy of parts manufactured using Fused Deposition Modeling technology, Advances in Science & Technology – Research Journal, 7/19, 27.
• [4] AHN S.H. et al., 2003, Anisotropic tensile failure model of rapid prototyping parts - fused deposition modeling (FDM). International Journal of Modern Physics B, 17, 8-9.
• [5] BELLINI A., GUCERI S., 2003, Mechanical characterization of parts fabricated using fused deposition modeling, Rapid Prototyping Journal, 9, 252-264.
• [6] GÓRSKI F., WICHNIAREK R., ANDRZEJEWSKI J., 2012, Influence of part orientation on strength of ABS models manufactured using Fused Deposition Modeling technology, Przetwórstwo Tworzyw, 18/5, ISSN 1429-0472, (in Polish).
• [7] GÓRSKI F., 2013, Evaluation of strength of products obtained using additive manufacturing technology, Poznan University of Technology (doctoral thesis).
• [8] GAVRUS C., 2013, Economic efficiency of using rapid prototyping technology, Applied Mechanics and Materials, 371, 210-214.
• [9] ESPALIN D., RAMIREZ J.A., MEDINA F., WICKER R., 2014, Multi-material, multi-technology FDM: exploring build process variations, Rapid Prototyping Journal, 20, 236 –244.
• [10] SOOD A.K., OHDAR R.K., MAHAPATRA S.S., 2010, Parametric appraisal of mechanical property of fused deposition modeling processed parts, Materials and Design, 31/1.
• [11] OCZOŚ K., 2008, Fibre reinforced composites - properties, application, machining, Mechanik, 81/7, 579-592.
• [12] NOVAKOVA-MARCINCINOVA L., NOVAK-MARCINCIN J., 2014, Production of composite material by fdm rapid prototyping technology, Applied Mechanics and Materials, 474, 186-191.
• [13] GÓRSKI F., WICHNIAREK R., KUCZKO W., 2012, Analysis of influence of FDM models filling degree on their shape accuracy, Przetwórstwo Tworzyw, 5/49, (in Polish).
• [14] DYBAŁA B., 2013, Integration and coherence models for reverse engineering: selected aspects of industrial and medical uses of Reverse Engineering, Oficyna Wydawnicza Politechniki Wrocławskiej, ISBN: 9788374937962, (in Polish).