The stress-minimizing hole in a shear-loaded elastic plate at a given energy increment

• Autorzy: Vigdergauz S.

Identyfikatory

DOI

10.24423/aom.3983

• Języki publikacji: EN

Abstrakty

EN

Minimization of the peak tangential stresses around a single hole in an infinite 2D elastic plate under remote pure shear and a given hole-induced strain energy level is considered as a free-shape optimization problem under a physical constraint. It is solved by combining a genetic algorithm with the almost analytical, and hence highly accurate stress-strain solver for any finitely parameterized family of closed curves. The results obtained in wide ranges of the governing parameters are detailed and discussed. They may be applicable to the optimal holes design in constructive elements and dilute perforated structures. The current analysis extends the author’s previous publications, which were focused on the unconstrained shape optimization within the same setup.

Słowa kluczowe

EN

2D elastostatic problem; Kolosov–Muskhelishvili potentials; stress concentration; factor; shape optimization; effective energy; extremal elastic structures; genetic algorithm

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Archives of Mechanics
• Rocznik: 2022
• Tom: Vol. 74, nr 2-3
• Strony: 109--126
• Opis fizyczny: Bibliogr. 21 poz., rys., wykr.

Twórcy

autor

Vigdergauz S.

• Research and Development Division, Israel Electric Corporation Ltd., P.O.Box 10, Haifa 31000, Israel

Bibliografia

• 1. S. Vigdergauz, Shape optimization in an elastic plate under remote shear: from single to intercting holes, Journal of Mechanics of Materials and Structures, 3, 7, 1341–1363, 2008.
• 2. S. Vigdergauz, A generalization of the equi-stress principle in optimizing the mechanical performance of two-dimensional grained composites, Mathematics and Mechanics of Solids, 18, 4, 431–445, 2013.
• 3. S. Vigdergauz, Stress-minimizing hole in an elastic plate under remote shear, Journal of Mechanics of Materials and Structures, 1, 2, 387–406, 2006.
• 4. S. Vigdergauz, I. Elishakoff, Energy-minimizing holes in an elastic plate under remote loading, Journal of Mechanics of Materials and Structures, 14, 1, 139–154, 2019.
• 5. S. Vigdergauz, I. Elishakoff, Stress-minimizing holes with a given surface roughness in a remotely loaded elastic plane, Journal of Mechanics of Materials and Structures, 15, 1, 1–14, 2020.
• 6. A.H. England, Variable Methods in Elasticity, Springer, Berlin, 2009.
• 7. N.I. Muskhelishvili, Some basic Problems of the Mathematical Theory of Elasticity, 2nd ed., Noordhoff, Leiden, the Netherlands, 1975.
• 8. T.W. Gamelin, Complex Analysis, Springer, UTM, 2003.
• 9. I. Jasiuk, Cavities vis-a-vis rigid inclusions: elastic moduli of materials with polygonal inclusions, International Journal of Solids and Structures, 32, 3/4, 407–422, 1995.
• 10. N.L. Carothers, Real Analysis, Cambridge University Press, International ed., 2009.
• 11. S. Vigdergauz, A. Cherkaev, A hole in a plate optimal for its biaxial extensioncompression, Journal of Applied Mathematics and Mechanics, 50, 3, 401–404, 1986.
• 12. S.D. Carothers, Plane strain in a wedge, Proceedings of the Royal Society of Edinburgh, 23, 292, 1912.
• 13. A.I. Kalandia, Mathematical Methods of Two-dimensional Elasticity, Mir, Moscow, 1975.
• 14. O. Sigmund, On the usefulness of non-gradient approaches in topology optimization, Structural and Multidisciplinary Optimization, 43, 5, 589–596, 2011.
• 15. I. Rechenberg, Evolutionsstrategie – Optimierung technischer Systeme nach Prinzipien der biologischen Evolution, Friedrich Frommann Verlag, Stuttgard, 1973.
• 16. J.H. Holland, Adaptation in Natural and Artificial Systems, University of Michigan Press, Ann-Arbor, Michigan, 1975.
• 17. O. Kramer, Genetic Algorithm Essentials, Springer International Publishing, Switzerland, 2017.
• 18. S. Torquato, L.V. Gibiansky, M.J. Silva, L.J. Gibson, Effective mechanical and transport properties of cellular solids, International Journal of Mechanical Sciences, 40, 1, 71–82, 1998.
• 19. A.V. Cherkaev, Y. Grabovsky, A.B. Movchan, S.K. Serkov, The cavity of optima shape under shear stresses, International Journal of Solids and Structures, 35, 33, 4391–4410, 1998.
• 20. G. Allaire, F. Jouve, H. Maillot, Topology optimization for minimum stress design with the homogenization method, Structural and Multidisciplinary Optimization, 28, 87–98, 2004.
• 21. A. Ferrer, P. Geoffroy-Donders, G. Allaire, Stress minimization for lattice structures, part I: Micro-structure design, Transactions of the Royal Society A, 379, 2021.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).