The Structural and Strength Changes Resulting from Modification of Heat Treatment of High Carbon Steel

• Autorzy: Grygier D. , Rutkowska-Gorczyca M. , Jasiński R. , Dudziński W.

Identyfikatory

DOI

10.1515/amm-2016-0165

• Języki publikacji: EN

Abstrakty

EN

Pearlitic steels containing from some 0,8 to 0,95% C belong to the group of unalloyed steels intended for cold drawing or rolling. One of the problems discussed in literature is cracking of pearlitic steel subjected to plastic working, caused by high brittleness of the lamellar precipitations of hard cementite. This issue is extremely important because it affects significantly reduce fatigue strength. The paper presents proposals to modify the process of heat treatment, results in getting a steel with spheroidal structure characterized by better plastic properties, in order to eliminate this problem.

Słowa kluczowe

EN

pearlit; cementite; spheroidization; plastic working

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 971--976
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Grygier D.

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, 25 Smoluchowskiego Str., 50-372 Wroclaw, Poland

autor

Rutkowska-Gorczyca M.

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, 25 Smoluchowskiego Str., 50-372 Wroclaw, Poland

autor

Jasiński R.

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, 25 Smoluchowskiego Str., 50-372 Wroclaw, Poland

autor

Dudziński W.

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, 25 Smoluchowskiego Str., 50-372 Wroclaw, Poland

Bibliografia

• [1] J. Adamczyk, Engineering of metal materials (in Polish), Wyd. Politechniki Śląskiej, Gliwice 2004.
• [2] M. F. Ashby, D. R. H. Jones, Engineering Materials: An Introduction to Microstructures, Processing and Design, Elsevier, Oxford 2005.
• [3] L. A. Dobrzański, Engineering materials and material design (in Polish), WNT, Warszawa 2006.
• [4] D. Henkel, A. W. Pense, Structure and Properties of Engineering Materials, The McGraw-Hill Higher Education, Singapore 2002.
• [5] R. A. Higgins, Materials for Engineers and Technician, Newnes 2006.
• [6] D. Grygier, M. Rutkowska-Gorczyca, R. Jasiński, W. Dudziński, Journal of Machine Engineering 14, 1 (2014).
• [7] C. Cordier-Robert, at all, Journal of Materials Science 43, 4 (2008).
• [8] V. I. Izotov, at all, Physics Of Metals And Metallography 103, 5 (2007).
• [9] M. X. Zhang, P.M. Kelly, Materials Characterization 60, 6 (2009).
• [10] T. Tarui, N. Maruyama, H. Tashiro, Journal of the Iron and Steel 91, 2 (2005).
• [11] M. Suliga, Archives of Metallurgy and Materials 57, 4 (2012).
• [12] V. G. Gavriljuk, Materials Science and Engineering: A 345, 1-2 (2003).
• [13] V. G. Gavriljuk, S. P. Oskaderov, Neue Hütte 30, 10 (1985).
• [14] V. N. Gridnev, V. G. Gavrilyuk, Physics of Metals 4, 3 (1982).
• [15] J. Languillaume, G. Kapelski, B. Baudelet, Acta Materialia 45, 3 (1997).
• [16] S. Ohsaki at all, Scripta Materialia 52, (2005).
• [17] G. E. Totten, M. A. H. Howes, Steel Heat Treatment Handbook, Marcel Dekker, New York (1997).
• [18] P. Matusiewicz, W. Ratuszek, A. Zielinska-Lipiec, Archives of Metallurgy and Materials 56, 1 (2011).
• [19] F. Staub at all, Materials science (in Polish), Wydawnictwo “ŚLĄSK”, Katowice (1978).
• [20] G. F. Vander Voort (ed), Atlas of Time-Temperature Diagrams for Iron and Steels, ASM International, Materials Park, OH 2004.
• [21] P. Matusiewicz, W. Ratuszek, A. Zielinska-Lipiec, Archives of Metallurgy and Materials 56, 1 (2011).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę