PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Numerical Simulation of Solar Radiation and Conjugate Heat Transfer through Cabin Seat Textile

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The solar radiation and the conjugate heat transfer through the cabin seat fabric were investigated numerically with a focus on a comparative analysis of various fabric solar reflectance or reflectivity (SR) and inlet cooling air velocity. For this purpose, 3D compressible Reynolds-averaged Navier–Stokes equations with the low Reynolds number turbulence model were utilized to simulate the airflow in the cabin. The discrete ordinate radiation model was adopted to describe the solar radiation. The conjugate heat transfer between the airflow and the fabric seats was included. The airflow temperature, radiative heat flux, and radiative heat transfer through the fabrics in a fixed cross section were studied. The results demonstrate that the increase in fabric SR leads to the increase in energy reflected to the atmosphere, which will bring about a lower temperature on the seat fabric. The decrease in emissivity and the energy absorbed results in the lower heat transfer and heat radiation and leads to the improvement of the cabin thermal environment. The high-temperature gradient near the seat causes the forced air circulation and is beneficial for the improvement of the thermal comfort. However, the cooling effect is not so obvious near the cabin seats when the inflow speed is increased.
Rocznik
Strony
501--507
Opis fizyczny
Bibliogr. 21 poz.
Twórcy
autor
  • School of Fashion Design and Engineering, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
  • Shangyu College, Shaoxing University, Shaoxing, Zhejiang 312300, China
autor
  • School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China
Bibliografia
  • [1] Angelova, R. A. (2015). Textiles and human thermophysiological comfort in the indoor environment. CRC Press, 10, 15–33.
  • [2] Liu, S., Pang, L. (2015). Study on dynamic prediction of thermal response for aircraft device cabin. International Conference on Computer. Atlantis Press, 620–625.
  • [3] Kim, H., Kim, S. (2019). Heat Storage and Release Characteristics of Ceramic-Imbedded Woven Fabric for Emotional Clothing. Autex Research Journal, 19(2), 165–172.
  • [4] Kothari, V. K., Bhattacharjee, D. (2008). Prediction of thermal resistance of woven fabrics. sPart I: Mathematical model. Journal of the Textile Institute, 99(5), 421–432.
  • [5] Bhattacharjee, D., Kothari, V. K. (2008). Prediction of thermal resistance of woven fabrics. Part II: Heat transfer in natural and forced convective environments. Journal of the Textile Institute, 99(5), 433–449.
  • [6] Hu, Z., Wang, L., Wang, H. (2015). Heat Transfer Based Numerical Investigation of Aircraft Cabin Environment from Various Inlet Conditions. Frontiers in Heat and Mass Transfer, 6(1), 17–25.
  • [7] Julia, M. M., Claudia, M. M. (2018). Ceiling-based cabin displacement ventilation in an aircraft passenger cabin: Analysis of thermal comfort. Building and Environment, 146, 29–36.
  • [8] Günther, G., Bosbach, J., Pennecot, J. (2006). Experimental and numerical simulations of idealized aircraft cabin flows. Aerospace Science & Technology, 10(7), 563–573.
  • [9] Zhu, G., Kremenakova, D., Wang, Y. (2017). 3D numerical simulation of laminar flow and conjugate heat transfer through fabric. Autex Research Journal, 17(1), 53–60.
  • [10] He, S., Qian, Y., Xue, W., Cheng, L. (2019). Numerical simulation of flow field in air-jet loom main nozzle. Autex Research Journal, 19(2), 181–190.
  • [11] Renato, M. C., Kleber, M. L., Marcos, F. C. (2019). A review of hybrid integral transform solutions in fluid flow problems with heat or mass transfer and under Navier-Stokes equations formulation. Numerical Heat Transfer Fundamentals, 4, 1–28.
  • [12] Incropera, F. P., DeWitt, D. P. (2002). Introduction to heat transfer. (4th ed.). John Wiley & Sons (New York), pp. 265–266.
  • [13] Das, A., Alagirusamy, R., Kumar, P. (2011). Study of heat transfer through multilayer clothing assemblies: A theoretical prediction. Autex Research Journal, 11(2), 54–61.
  • [14] Modest, M. F. (2003). Radiative heat transfer. (2nd ed.). Academic Press (San Diego), pp. 55–73.
  • [15] Banerjee, D., Zhao, S., Schabel, S. (2010). Heat transfer in thin porous fibrous material: mathematical modelling and experimental validation using active thermography. Autex Research Journal, 10(4), 95–101.
  • [16] Metacomp Technologies Inc. (2013). CFD++ user manual, Agoura Hills (CA), pp. 15–33.
  • [17] Jia, J. H., Fu, D. B., He, Z. P. (2020). Hypersonic aerodynamic interference investigation for a two-stage-to-orbit model. Acta Astronautica, 168, 138–145.
  • [18] Jia, J. H., Zhang, Y. J. (2020). Heat flux and pressure reduction using aerospike and counterflowing jet on complex hypersonic flow. International Journal of Aeronautical and Space Sciences, 19, 1–9.
  • [19] Ramesh, N., Balaji, C., Venkateshan, S. P. (1999). Effect of boundary conditions on natural convection in an enclosure. International Journal of Transport Phenomena, 1, 205–214.
  • [20] Hassan, E., Hasnaoui, M., Campo, A. (2006). Effects of surface radiation on natural convection in a Rayleigh-Benard square enclosure: steady and unsteady conditions. Heat and Mass Transfer, 42, 214–225.
  • [21] Alejandro, Z. G., José, A. M., Juan, M. L. (2005). Radiation reflectivity and absorptivity in three plant densities and its relation to corn yield CAFIME variety. Agrociencia, 39(3), 285–292.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-e466d041-1b10-4a3f-8e20-410d0646a537
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.