Study of parameters of the mixture and heat generation of the dd15 diesel engine of the sandvik lh514 loader in the process of using alternative fuels based on rme

• Autorzy: Bembenek Michał , Melnyk Vasyl , Mosora Yurii

Identyfikatory

DOI

10.2478/ama-2024-0021

• Języki publikacji: EN

Abstrakty

EN

Today, there is a growing shortage of commercial motor fuels in the world. This is due to the tendency to regulate the extraction of hydrocarbons, which are the main raw materials for their production; and, therefore, to reduce the import of oil, alternative types of fuel for diesel engines based on oils and animal fats are becoming widespread today. In this regard, intensive work is underway to convert internal combustion engines to biofuel-based ones both in countries with limited fuel and energy resources and in highly developed countries that have the opportunity to purchase liquid energy carriers. Biodiesel fuel (biodiesel, PME, RME, FAME, EMAG, etc.) is an environmentally friendly type of biofuel obtained from vegetable and animal fats and used to replace petroleum diesel fuel. According to the results of modelling, in the process of using RME B100 biodiesel fuel, we found a reduction in nitrogen dioxide emissions by 21.5% and a reduction in soot emissions by 34.5%. This will positively affect the environmental performance of the Sandvik LH514 loader, which is especially relevant in closed environments such as mines. So, according to the results of studies of the operation of the DD15 engine of the Sandvik LH514 loader on commercial and RME B100 biodiesel fuel, it was established that the use of biodiesel fuel leads to a deterioration of the mixture, due to which heat generation is reduced and, as a result, fuel consumption increases and engine power decreases, but the aspect of environmental indicators constitutes the significant improvement demonstrated by the present work.

Słowa kluczowe

EN

engine; alternative fuels; biodiesel; economy; spraying; mixing; heat release; consumption; power

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2024
• Tom: Vol. 18, no. 2
• Strony: 169--176
• Opis fizyczny: Bibliogr. 35 poz., rys., tab., wykr.

Twórcy

autor

Bembenek Michał

• Department of Manufacturing Systems, Faculty of Mechanical Engineering and Robotics, AGH University of Krakow, al. Adama Mickiewicza 30, 30-059 Kraków, Poland

• https://orcid.org/0000-0002-7665-8058

autor

Melnyk Vasyl

• Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska St., Ivano-Frankivsk, Ukraine

• https://orcid.org/0000-0002-5793-5486

autor

Mosora Yurii

• Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska St., Ivano-Frankivsk, Ukraine

• https://orcid.org/0000-0002-3192-7146

Bibliografia

• 1. Naoto H, Tatsuya K, Yuji M, Takashi S, Hiroshi K, Ishiyama T. Analy-sis of Mixture Formation Process in a Diesel Engine with Post Injec-tion. SAE technical paper series. 2015. https://doi.org/10.4271/2015-01-1836
• 2. O’Connor J, Musculus M. In-Cylinder Mechanisms of Soot Reduction by Close-Coupled Post-Injections as Revealed by Imaging of Soot Luminosity and Planar Laser-Induced Soot Incandescence in a Heavy-Duty Diesel Engine. SAE International Journal of Engines. 2014 Apr 1;7(2):673–93.DOI:10.4271/2014-01-1255
• 3. Hessel R, Reitz RD, Musculus M, O’Connor J, Flowers D. A CFD Study of Post Injection Influences on Soot Formation and Oxidation under Diesel-Like Operating Conditions. SAE International Journal of Engines. 2014 Apr 1;7(2):694–713. DOI:10.4271/2014-01-1256
• 4. O’Connor J, Musculus M. Effects of exhaust gas recirculation and load on soot in a heavy-duty optical diesel engine with close-coupled post injections for high-efficiency combustion phasing. International Journal of Engine Research. 2013 Jul 24;15(4):421–43. DOI:10.1177/1468087413488767
• 5. O’Connor J, Musculus M. Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding. SAE International Journal of Engines. 2013 Apr 8;6(1):400–21. DOI:10.4271/2013-01-0917
• 6. Naoto H, Tatsuya K, Takashi S, Wang H, Ishiyama T. Smoke Reduc-tion Effects by Post Injection for Various Injection Parameters and Combustion Chamber Shapes in a Diesel Engine. SAE technical pa-per series. 2014 Oct 13. DOI:10.4271/2014-01-2634
• 7. Eismark J, Christensen M, Andersson M, Karlsson A, Denbratt I. Role of fuel properties and piston shape in influencing soot oxidation in heavy-duty low swirl diesel engine combustion. Fuel. 2019 Oct;254:115568. DOI: https://doi.org/10.1016/j.fuel.2019.05.151
• 8. Benajes J, García A, Monsalve-Serrano J, Lago Sari R. Fuel con-sumption and engine-out emissions estimations of a light-duty engine running in dual-mode RCCI/CDC with different fuels and driving cy-cles. Energy. 2018 Aug;157:19–30. DOI:10.1016/j.energy.2018.05.144
• 9. Rao L, Zhang Y, Kook S, Kim KS, Kweon CB. Morphology and internal structure of soot particles under the influence of jet–swirl and jet–jet interactions in a diesel combustion environment. Combustion and Flame. 2020 Apr;214:25–36. https://doi.org/10.1016/j.combustflame.2019.12.017
• 10. Millo F, Piano A, Roggio S, Pastor JV, Micó C, Lewiski F, et al. Mixture formation and combustion process analysis of an innovative diesel piston bowl design through the synergetic application of nu-merical and optical techniques. February 2022, Fuel, Volume 309. https://doi.org/10.1016/j.fuel.2021.122144
• 11. Hoang AT. Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel. En-ergy. 2019 Mar;171:795–808. https://doi.org/10.1016/j.energy.2019.01.076
• 12. Hoang AT. Waste heat recovery from diesel engines based on Organic Rankine Cycle. Applied Energy. 2018 Dec;231:138–66. https://doi.org/10.1016/j.apenergy.2018.09.022
• 13. Zareh P, Zare AA, Ghobadian B. Comparative assessment of per-formance and emission characteristics of castor, coconut and waste cooking based biodiesel as fuel in a diesel engine. Energy. 2017 Nov;139:883–94. https://doi.org/10.1016/j.energy.2017.08.040
• 14. Rakopoulos DC, Rakopoulos CD, Giakoumis EG, Papagiannakis RG, Kyritsis DC. Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (di-rect injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl ether. Energy. 2014 Aug;73:354–66. https://doi.org/10.1016/j.energy.2014.06.032
• 15. Mohamed Khaled Abdelrazek, Mohsen Mohamed Abdelaal, Ahmed Mustafa El-Nahas. Numerical simulation of a diesel engine perfor-mance powered by soybean biodiesel and diesel fuels. Beni-Suef University Journal of Basic and Applied Sciences. 2023 Jan 22;12(1). https://doi.org/10.1186/s43088-023-00349-w
• 16. Jo H, Ishikawa T, Naoto Horibe, Hayashi J, Hiroshi Kawanabe, Ishiyama T. Effect of Jet-Jet Angle on Combustion Process of Diesel Spray in an RCEM. SAE International Journal of Advances and Cur-rent Practices in Mobility. 2020 Sep 15;3(1):276–86. https://doi.org/10.4271/2020-01-2058
• 17. Piano A, Roggio S, Millo F, García A, Micó C, Lewiski F, et al. Nu-merical and optical soot characterization through 2-color pyrometry technique for an innovative diesel piston bowl design. Fuel. 2023 Feb 1;333:126347–7. https://doi.org/10.1016/j.fuel.2022.126347
• 18. Jena A, Akhilendra Pratap Singh, Avinash Kumar Ágarwal. Optical and computational investigations of the effect of Spray-Swirl interac-tions on autoignition and soot formation in a compression ignition en-gine fuelled by Diesel, dieseline and diesohol. Applied Energy. 2022 Oct 1;324:119677–7. https://doi.org/10.1016/j.apenergy.2022.119677
• 19. Sevostyanov SM, Melnyk ME, Vakarenko SV. Research of inter-communication of serve of fuel and mixtureform with working process in diesels during work on partial modes. Modern problems and ways of their solution in science, transport, production and education. Sworld. 2012 Dec 18-27:48-53.
• 20. Yang W, Li F, Ma F, Xu J. Numerical analysis of mixing and combus-tion characteristics of a lateral swirl combustion system in OP2S die-sel engines. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2022 Sep 16;095440702211218. https://doi.org/10.1177/09544070221121874
• 21. Neerav A, Nagar N, Zermeno R, Chiang M, Thomas I. Developing a 55% BTE Commercial Heavy-Duty Opposed-Piston Engine without a Waste Heat Recovery System. SAE technical paper series. 2017 Mar 28. https://doi.org/10.4271/2017-01-0638
• 22. Huo M, Huang Y, Hofbauer P. Piston Design Impact on the Scaveng-ing and Combustion in an Opposed-Piston, Opposed-Cylinder (OPOC) Two-Stroke Engine. SAE technical paper series. 2015 Apr 14. https://doi.org/10.4271/2015-01-1269
• 23. Yamauchi J, Dong P, Nishida K, Ogata Y. Effects of Hole Diameter and Injection Pressure on Fuel Spray and Its Evaporation Character-istics of Multi-Hole Nozzle for Diesel Engine. 2017 Oct 8. DOI:10.4271/2017-01-2305
• 24. Fuyuto T, Hattori Y, Yamashita H, Toda N, Mashida M. Set-off length reduction by backward flow of hot burned gas surrounding high-pressure diesel spray flame from multi-hole nozzle. International Journal of Engine Research. 2016 Jul 28;18(3):173–94. DOI:10.1177/1468087416640429.
• 25. Pastor J, Olmeda P, Javier Rodríguez Martín, Lewiski F. Methodolo-gy for Optical Engine Characterization by Means of the Combination of Experimental and Modeling Techniques. Applied sciences. 2018 Dec 11;8(12):2571–1. DOI:10.3390/app8122571
• 26. Bo Y, Liu F, Wu H, Li H, Shi Z. A numerical investigation of injection pressure effects on wall-impinging ignition at low-temperatures for heavy-duty diesel engine. Applied Thermal Engineering. 2021 Feb 1;184:116366–6. https://doi.org/10.1016/j.applthermaleng.2020.116366
• 27. Srinivasan R, Raja G, Nallusamy N, Raghu P. Experimental study of mixture formation in biodiesel spray with preheated fuel International Journal of Applied Engineering Research. 2015 Mar; 10;19; 13687-13691.
• 28. Yin B, Ye Z, Jia H, Yu S, Deng WQ. Experimental Study on the Penetration of Diesel and Biodiesel Spray Liquid Emerging from an Equilateral Triangular Orifice under Evaporative Conditions. Journal of Thermal Science. 2022 Jan 22;31(5):1565–74. https://doi.org/10.1007/s11630-022-1529-5
• 29. Raghu P, Nallusamy N, Spray characteristics of biodiesel fuel in constant volume chamber using multi-response optimization tech-nique. Journal of Thermal Science, 2016, 25(6):581–588.
• 30. Yu S, Yin B, Jia H, Wen S, Li X, Yu J. Theoretical and experimental comparison of internal flow and spray characteristics between diesel and biodiesel. Fuel. 2017 Nov 1;208:20–9. DOI:10.1016/j.fuel.2017.06.136
• 31. McCaffery C, Zhu H, Sabbir Ahmed CM, Canchola A, Chen JY, Li C, et al. Effects of hydrogenated vegetable oil (HVO) and HVO/biodiesel blends on the physicochemical and toxicological properties of emis-sions from an off-road heavy-duty diesel engine. Fuel. 2022 Sep;323:124283. https://doi.org/10.1016/j.fuel.2022.124283
• 32. Aatola H, Larmi M, Sarjovaara T, Mikkonen S. Hydrotreated Vegeta-ble Oil (HVO) as a Renewable Diesel Fuel: Trade-off between NOx, Particulate Emission, and Fuel Consumption of a Heavy Duty En-gine. SAE International Journal of Engines. 2008 Oct 6;1(1):1251–62. DOI:10.4271/2008-01-2500
• 33. Roque LFA, Berlini R, de Z, Coronado CJR, Pinto GM, Cintra AJA, et al. Experimental analysis and life cycle assessment of green diesel (HVO) in dual-fuel operation with bioethanol. 2023 Jan 1;389: 135989–9. https://doi.org/10.1016/j.jclepro.2023.135989
• 34. Jiménez Espadafor F, Torres García M, Becerra Villanueva J, More-no Gutiérrez J. The viability of pure vegetable oil as an alternative fuel for large ships. Transportation Research Part D: Transport and Environment. 2009 Oct;14(7):461–9. https://doi.org/10.1016/j.trd.2009.05.005
• 35. Chiaramonti D, Prussi M. Pure vegetable oil for energy and transport. International Journal of Oil, Gas and Coal Technology. 2009;2(2):186. DOI: 10.1504/IJOGCT.2009.024886