Design and implementation of plug-and-play analog resistance temperature sensor

• Autorzy: Jevtic N. , Drndarevic V.
• Języki publikacji: EN

Abstrakty

EN

In this paper the design and implementation of a plug-and-play analog resistance temperature sensor is presented. The smart temperature sensor consists of an analog sensor element with transducer electronic data sheet (TEDS) memory device and a network- capable application processor (NCAP) connected through a mixed-mode interface (MMI). The mixed-mode interface and NCAP front-end electronic support have been implemented by the use of a standard 8-bit microcontroller. NCAP’s application processing and network communication functions are implemented based on the concept of virtual instrumentation using a PC. The implemented NCAP can also be used as a plug-and-play stand-alone data acquisition system or as development system for plug-and-play sensors compliant with the IEEE 1451.4 standard. Details of sensor implementation and test results are included in the paper.

Słowa kluczowe

EN

smart sensor; PT100; IEEE 1451.4; mixed mode interface; TEDS; NCAP; LabVIEW

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2013
• Tom: Vol. 20, nr 4
• Strony: 565--580
• Opis fizyczny: Bibliogr. 24 poz., rys., tab., wykr., wzory

Twórcy

autor

Jevtic N.

• University of Belgrade, Faculty of Transport and Traffic Engineering, Belgrade, Serbia

autor

Drndarevic V.

• University of Belgrade, School of Electrical Engineering, Belgrade, Serbia

Bibliografia

• [1] Bojko, T. (2005). Smart sensor solutions for mechanical measurements and diagnostic. Metrology and Measurement Systems, 12(1), 95-103.
• [2] Frank, R. (2000). Understanding Smart Sensors, 2nd ed. Norwood: Artech House.
• [3] Drndarevic, V., Bolic, M. (2008). Gamma Radiation Monitoring with Internet-Based Sensor Network. Instrum. Sci. Technol., 36(2), 121-133.
• [4] Wobschall, D. (2005). A Minimal Dot 4 NCAP with Compatible Sensor Bus. In Proceedings of Sensosrs for Industry Conference. Houston, TX, 139-142.
• [5] Ramos, H. G., Postolache, O., Pereira, M., Girao, P. S. (2006). Embedding IEEE 1451.4 smart sensing node in a Wireless Air Quality Monitoring Network. In Proceedings of 49th IEEE International Midwest Symposium on Circuits and Systems (MWSCAS). San Juan, PR, 177-181.
• [6] Licht, T. R. (2001). The 1451.4 Proposed Standard. IEEE Instru. Meas. Mag., 4(1), 12-18.
• [7] IEEE The Institute of Electrical and Electronics Engineers. (2004). 1451.4 IEEE Standard for A Smart Transducer Interface for Sensors and Actuators - Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats. New York: IEEE.
• [8] Lee, K. B., Song, E. Y. (2008). Understanding IEEE 1451-Networked Smart Transducer Interface Standard. IEEE Instru. Meas. Mag., 11(2), 11-17.
• [9] Ulivieri, N., Distante, C., Luca, T., Rocchi, S., Siciliano, P. (2006). IEEE1451.4: A way to standardize gas sensor. Sensor. Actuat. B-Chem., 114(1), 141-151.
• [10] Kim, J. D., Kim, D. J., Byun, H. G., Ham, Y. K., Jung, W. S., Han, D. W., Park, J. S., Lee, H. L. (2007). The definition of basic TEDS of IEEE 1451.4 for sensors for an electronic tongue and the proposal of new template TEDS for electrochemical devices. Talanta, 71(4), 1642-1651.
• [11] Yurish, S. Y. (2005). IEEE 1451 Standard and Frequency Output Sensors: How to obtain a Broad-Based Industry Adoption. Sensors & Transducers Magazine, 59(9), 412-418. http://www.sensorsportal.com.
• [12] Liu, J., Li, Y., Zhao, H. (2010). A Temperature Measurement System Based on PT100. In Proceedings of International Conference on Electrical and Control Engineering (ICECE 2006). Wuhan, China, 296-298.
• [13] Svelto, C., Galzerano, G., Bava, E. (2001). Compact and accurate digital thermometer based on Anderson’s loop and Pt-100 sensor. Measurement, 29, 287-292.
• [14] DS2433 4Kb 1-Wire EEPROM. (June 2012). http://datasheets.maximintegrated.com/en/ds/DS2433.pdf.
• [15] 1-Wire Devices. (June 2012). http://www.maximintegrated.com/products/1-wire/.
• [16] AT90USB1286 Microcontroller. (June 2012). http://www.atmel.com/devices/at90usb1286.aspx.
• [17] Jevtic, N., Drndarevic, V. (2012). Development of Smart Transducers Compliant with the IEEE 1451.4 Standard. In Proceedings of 8th IEEE International Symposium on Instrumentation and Control Technology (ISICT). London, UK, 126-131.
• [18] Evaluation of measurement data. (2008). Guide to the expression of uncertainty in measurement, JCGM 100, GUM 1995 with minor corrections, First edition.
• [19] Dzwonkowski, A., Swedrowski, L. (2012). Uncertainty analysis of measuring system for instantaneous power research. Metrology and Measurement Systems, 12(3), 573-582.
• [20] Atmel AVR Studio. (December 2012). http://www.atmel.com/tools/atmelstudio.aspx.
• [21] National Instruments LabVIEW. (June 2013). http://sine.ni.com/np/app/main/p/docid/nav-104/lang/pl/.
• [22] Agilent 34401A Data Sheet. (June 2013). http://cp.literature.agilent.com/litweb/pdf/5968-0162EN.pdf.
• [23] Jones C. H. (December 2012). IEEE 1451.4 Smart Transducers Template Description Language. http://standards.ieee.org.
• [24] How to Install the TEDS Library into LabVIEW. (June 2013).http://digital.ni.com/public.nsf/allkb/DE722DD48F72175986256EFB00545EB8

Uwagi

EN

This research was supported by the Serbian Ministry of Science and Technological Development in project TR36047 and TR32043.