Analysis of an electromagnetic energy harvester using the 3D finite element method

• Autorzy: Kulik M.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the analysis of a vibration electromagnetic energy harvester using the 3D finite element method. The computations were carried out for the system consisting of coreless coil, four movable permanent magnets which induce voltage and the two stationary ones for providing additional force. The magnetic flux linkage, derived from 2D and 3D finite element models, was compared showing the need to use a 3D model in designing.

• Wydawca: Oficyna Wydawnicza Politechniki Opolskiej
• Czasopismo: Zeszyty Naukowe. Elektryka / Politechnika Opolska
• Rocznik: 2018
• Tom: z. 76
• Strony: 63--64
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Kulik M.

• Faculty of Electrical Engineering, Automatic Control and Informatics Institute of Drive Systems and Robotics

Bibliografia

• [1] BEEBY S.P., TUDOR M.J., WHITE N.M.: Energy harvesting vibration sources for microsystems applications, Meas. Sci. Technol., Vol. 17, No. 12, pp. R175–R195, 2006
• [2] JAGIEȽA M., KULIK M.: Wideband electromagnetic converter of mechanical vibrations energy into electrical energy, Patent application, Patent Office of the Republic of Poland, 2017
• [3] GEUZAINE C., REMACLE J.-F.: Gmsh: a three-dimensional finite element mesh generator with built-in pre- and post-processing facilities, Int. Journal for Numerical Methods in Eng., Vol. 79, Issue 11, pp. 1309–1331, 2009
• [4] ONELAB, www.onelab.info, [April 9th, 2018]

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).