PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Investigations of the fuel injection and atomization with the use of laser illumination

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Badanie wtrysku i rozpylenia paliwa z wykorzystaniem oświetlenia laserowego
Języki publikacji
EN
Abstrakty
EN
The paper presents some aspects of the application of selected methods of optical research whose aim is to obtain information on the course of the atomization and evaporation processes in the combustion chamber. The paper shows images of a gasoline fuel spray when injected to a high-pressure chamber. These images have been recorded using conventional sources of light and laser illumination. Research with the use of a YAG pulsed laser of high illumination pulse energy enabled an assessment of the fuel distribution in the transverse cross-section of the fuel spray. The paper describes such a possibility of modification of the experiment using laser illumination as to obtain information on the spatial distribution of both the liquid and gaseous phase of the injected fuel.
PL
W artykule omówiono niektóre aspekty stosowania wybranych metod badań optycznych, których celem jest uzyskanie informacji o przebiegu procesu rozpylenia i odparowania paliwa w komorze spalania silnika spalinowego. Przedstawione zostały obrazy strugi benzyny wtryskiwanej do komory ciśnieniowej zarejestrowane przy wykorzystaniu konwencjonalnych źródeł światła i oświetlenia laserem. Badania z wykorzystaniem lasera impulsowego typu YAG o dużej energii impulsu oświetlającego umożliwiły ocenę rozkładu paliwa w poprzecznym przekroju strugi paliwa. Opisano możliwość takiej modyfikacji eksperymentu prowadzonego z oświetleniem laserowym, aby uzyskać informację zarówno o przestrzennym rozkładzie fazy ciekłej, jak i fazy gazowej wtryskiwanego paliwa.
Czasopismo
Rocznik
Strony
469--475
Opis fizyczny
Bibliogr. 11 poz., il., pełen tekst na CD
Twórcy
autor
  • Faculty of Machines and Transport at Poznan University of Technology
autor
  • Faculty of Machines and Transport at Poznan University of Technology
autor
  • Faculty of Machines and Transport at Poznan University of Technology
autor
  • Faculty of Machines and Transport at Poznan University of Technology
Bibliografia
  • [1] Golloch R.: Downsizing bei Verbrennungsmotoren: Ein wirkungsvolles Konzept zur Kraftstoffverbrauchssenkung, Springer Verlag, 2001.
  • [2] Heiduk T., Kuhn M., Stichlmeir M., Unselt F.: Der neue 1,8-L-TFSI-Motor von Audi Teil 2: Gemischbildung, Brennverfahren und Aufladung, MTZ 07-08, 2011.
  • [3] Intelligent Laser Applications GmbH http://www.ila.de/
  • [4] La Vision, LIF Seminar 16-18 October 2012, Göttingen.
  • [5] Pielecha I., Wisłocki K., Czajka J., Maslennikov D.: The influence of the interactions of fuel doses on the fuel atomization in a high pressure direct fuel injection, 24 rd European Conference on Liquid Atomization and Spray Systems – ILASS – Europe 2011, Estoril 2011.
  • [6] Vanhaelst R., Thiele O., Berg T., Hahne B., Stellet H.-P., Wildhagen F., Hentschel W., Jördens C., Czajka J., Wislocki K., Pielecha I.: Development of an in-cylinder-optical infrared sensor for the determination of EGR and residual gas rates inside SI and diesel engines. International Congress Engine Combustion Processes, 14-15.03.2013. Ludwigsburg, Germany.
  • [7] Wislocki K., Pielecha I., Maslennikov D., Czajka J.: Analysis of Bio-Diesel Spray Atomization in Common-Rail Piezoinjector System, SAE Technical Paper 2010-01-2282, 2010.
  • [8] Wislocki K., Pielecha I., Czajka J., Stobnicki, P.: Experimental and Numerical Investigations into Diesel High-Pressure Spray – Wall Interaction under Various Ambient Conditions. SAE Technical Paper 2012-01-1662, 2012.
  • [9] www.continuumlasers.com
  • [10] Zhao H., Ladommatos N.: Optical Diagnostics for in-Cylinder Mixture Formation Measurements in IC-Engines Prog. Energy Combust. Sci. Vol 24, pp. 297-336, Elsevier Science Ltd, 1998.
  • [11] Zhao H.: Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines, SAE International, Warrendale 2012.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-e4372060-039b-450d-b767-5a2ac4125699
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.