Simplified and approximated correlations of heat transfer effectiveness for steam condenser

• Autorzy: Laskowski R. M. , Lewandowski J.
• Języki publikacji: EN

Abstrakty

EN

This paper presents two simplified and approximated relations of heat transfer effectivneness for steam condenser. The proposed relations of heat transfer effectivneness are a function of the measured and reference parameters. Correctness of relations were verified on the basis of data from the characteristics and measured data for the 200 MW steam condenser. A comparison of the outlet cooling water temperature calculated from the proposed relations and Beckman formula were performed. Formula proposed by Beckman for steam condenser of heat transfer effectivneness, in simplified form, is a function of saturation temperature, mass flow rate of cooling water and the reference parameter. It contains two constant exponents, which must be determined on the basis of the measured data. To assess the accuracy of the correlations the average value and standard deviation were used. The proposed correlations have simpler forms, but are slightly less accurate compared to the Beckman correlation.

Słowa kluczowe

EN

heat transfer effectiveness; steam condenser; approximated correlation

PL

efektywność wymiany ciepła; kondensator pary; przybliżona zależność

• Wydawca: Institute of Heat Engineering, Warsaw University of Technology
• Czasopismo: Journal of Power Technologies
• Rocznik: 2012
• Tom: Vol. 92, nr 4
• Strony: 258--265
• Opis fizyczny: Bibliogr. 14 poz., wykr.

Twórcy

autor

Laskowski R. M.

• Institute of Heat Engineering, Warsaw University of Technology, Poland

autor

Lewandowski J.

• Institute of Heat Engineering, Warsaw University of Technology, Poland

Bibliografia

• [1] F. P. Incropera, D. P. Dewitt, Introduction to heat transfer, John Wiley & Sons, 2002.
• [2] J. P. Holman, Heat transfer, McGraw-Hill, 2010.
• [3] E. Kostowski, Heat Transfer (in Polish), WP´S Gliwice, 2000.
• [4] T. S. Wiśniewski, Heat Transfer (in Polish), WNT Warszawa, 1997.
• [5] Y. A. Cengel, Heat transfer, McGraw-Hill, 1998.
• [6] Y. A. Cengel, Heat and mass transfer, McGraw-Hill, 2007.
• [7] G. Beckman, G. Heil, Mathematische Modelle für die Beurteilung von Kraftwerksprozessen, EKM Mitteillungen 10/1965.
• [8] P. Bogusz, O. Kopczyński, J. Lewandowski, Simplified model of heat exchanger (in Polish), XVIII th Congress of the Thermodynamics 22 (2002) 129–135.
• [9] O. Kopczyński, J. Lewandowski, A concept of thermal - flow state diagnostic system for heat exchangers (in Polish), International Conference Research and Development in Power Engineering (2001) 169–178.
• [10] G. Szapajko, H. Rusinowski, Empirical modelling of heat exchangers in a CHP Plant with bleed-condensing turbine, Archives of Thermodynamics Vol. 29, 2008, No. 4.
• [11] G. Szapajko, H. Rusinowski, Theoretical-empirical model of the steam-water cycle of the power unit, Acta Montanistica Slovaca 15 (2010) 24–27.
• [12] R. M. Laskowski, The application of the Buckingham theorem to modeling high-pressure regenerative heat exchangers in changed conditions, Journal of Power Technologies 91 (4) (2011) 198–205.
• [13] R. M. Laskowski, The concept of a new approximate relation for heat transfer effectiveness for a cross-flow heat exchanger with unmixed fluids, Journal of Power Technologies 91 (2) (2011) 93–101.
• [14] W. Żakowski, W. Kołodziej, Mathematics (in Polish), WNT Warsaw, 1993.