Application of reverse engineering technology in part design for shipbuilding industry

• Autorzy: Deja Mariusz , Dobrzyński Michał , Rymkiewicz Marcin

Identyfikatory

DOI

10.2478/pomr-2019-0032

• Języki publikacji: EN

Abstrakty

EN

In the shipbuilding industry, it is difficult to create CAD models of existing or prototype parts, especially with many freeform surfaces. The paper presents the creation of the CAD 3D model of a shipbuilding component with the application of the reverse engineering technology. Based on the data obtained from the digitization process, the component is reconstructed in point cloud processing programs and the CAD model is created. Finally, the accuracy of the digital model is estimated.

Słowa kluczowe

EN

reverse engineering; laser scanning; freeform surface; measurement techniques

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2019
• Tom: nr 2
• Strony: 126--133
• Opis fizyczny: Bibliogr. 26 poz., rys., tab.

Twórcy

autor

Deja Mariusz

• Gdańsk University of Technology Faculty of Mechanical Engineering Department of Manufacturing and Production Engineering G. Narutowicza 11/12, 80-233 Gdańsk Poland

autor

Dobrzyński Michał

• Gdańsk University of Technology Faculty of Mechanical Engineering Department of Manufacturing and Production Engineering G. Narutowicza 11/12, 80-233 Gdańsk Poland

autor

Rymkiewicz Marcin

• Scan 3D J. Sobieskiego 13, 81-198 Gdynia Poland

Bibliografia

• 1. 3D Measurement Solutions for Every Industry. https:// www.faro.com/metrology-3d-documentation-solutionsfrom-faro/3d-measurement-solutions-for-every-industry , dostęp: 29.11.2018.
• 2. ABBAS, Mohd Azwan, et al. Improvements to the accuracy of prototype ship models measurement method using terrestrial laser scanner. Measurement, 2017, 100: 301-310.
• 3. ACKERMANN, S., et al. Digital photogrammetry for high precision 3D measurements in shipbuilding field. In: 6th CIRP International Conference on ICME-Intelligent Computation in Manufacturing Engineering. 2008.
• 4. ANWER, Nabil; MATHIEU, Luc. From reverse engineering to shape engineering in mechanical design. CIRP Annals, 2016, 65.1: 165-168.
• 5. BUONAMICI, Francesco, et al. Reverse engineering of mechanical parts: A template-based approach. Journal of Computational Design and Engineering, 2018, 5.2: 145-159.
• 6. DEJA, Mariusz, et al. Application of Rapid Prototyping Technology in the Manufacturing of Turbine Blade with Small Diameter Holes. Polish Maritime Research, 2018, 25.s1: 119-123.
• 7. GÓMEZ, A., et al. Manufacturing of custom-made parts for assembly of large aircraft components. Procedia engineering, 2015, 132: 1006-1013.
• 8. KACZYŃSKI, Piotr, et al. Leakage flow reduction in different configuration of labyrinth seal on a turbine blade tip. In: Journal of Physics: Conference Series. IOP Publishing, 2018. p. 012012.
• 9. KO, Kwang Hee, et al. Development of software for computing forming information using a component based approach. International Journal of Naval Architecture and Ocean Engineering, 2009, 1.2: 78-88.
• 10. KOELMAN, Herbert J. Application of a photogrammetrybased system to measure and re-engineer ship hulls and ship parts: An industrial practices-based report. ComputerAided Design, 2010, 42.8: 731-743.
• 11. LI, Lingling, et al. An integrated approach of reverse engineering aided remanufacturing process for worn components. Robotics and Computer-Integrated Manufacturing, 2017, 48: 39-50.
• 12. MENNA, F.; TROISI, S. Low cost reverse engineering techniques for 3D modelling of propellers. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 2010, 38. Part 5: 452-457.
• 13. NSRP ASE Ship Check Data Capture Follow-on Project (NSRP ASE 05-01) Final Report (FY06), 2007.
• 14. PARK, Jung Seo; SHIN, Jong Gye; KO, Kwang Hee. Geometric assessment for fabrication of large hull pieces in shipbuilding. Computer-Aided Design, 2007, 39.10: 870-881.
• 15. PAULIC, Matej, et al. Reverse engineering of parts with optical scanning and additive manufacturing. Procedia Engineering, 2014, 69: 795-803.
• 16. ROCA-PARDIÑAS, Javier, et al. Assessing planar asymmetries in shipbuilding from point clouds. Measurement, 2017, 100: 252-261.
• 17. TASSETTI, N.; MARTELLI, Michele; BUGLIONI, Gabriele. Reverse engineering techniques for trawler hull 3D modelling and energy efficiency evaluation. In: Proc of NAV 2015 18th International Conference on Ships and Shipping Research. 2015. p. 24-26.
• 18. Using Artec 3D scanning technology to keep naval ships in perfect condition. https://www.artec3d.com/news/3dscanning-reverse-engineering-for-navy , dostęp: 29.11.2018
• 19. WANG, Jun, et al. A framework for 3D model reconstruction in reverse engineering. Computers & Industrial Engineering, 2012, 63.4: 1189-1200.
• 20. ZHANG, Yu. Research into the engineering application of reverse engineering technology. Journal of Materials Processing Technology, 2003, 139.1-3: 472-475.
• 21. Geomagic Design X: https://www.3dsystems.com/software/ geomagic-design-x [accessed on January 22, 2019].
• 22. COSTA-JOVER, Agustí, et al. Using the terrestrial laser scanner and simple methodologies for geometrically assessing complex masonry vaults. Journal of Cultural Heritage, 2018, https://doi.org/10.1016/j.culher.2018.10.003.
• 23. GUARATO, Alexandre Zuquete, et al. Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing. The International Journal of Advanced Manufacturing Technology, 2018, 95.1-4: 1315-1324.
• 24. HOLST, Christoph, et al. Terrestrial Laser Scanner TwoFace Measurements for Analyzing the Elevation-Dependent Deformation of the Onsala Space Observatory 20-m Radio Telescope’s Main Reflector in a Bundle Adjustment. Sensors, 2017, 17.8: 1833.
• 25. ŠTALMACH, Ondrej, et al. Conversion of data from the laser scanner to the Ansys Workbench. In: MATEC Web of Conferences. EDP Sciences, 2019. p. 02003.
• 26. ZHANG, Hongyao; LI, Lun; ZHAO, Jibin. Robot automation grinding process for nuclear reactor coolant pump based on reverse engineering. The International Journal of Advanced Manufacturing Technology, 2019, 1-13.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).