Modelling of the similar depth profiles of two different kinds of ions, implanted to WC-Co tools, used in wood-based material machining

• Autorzy: Barlak Marek , Wilkowski Jacek , Werner Zbigniew

Identyfikatory

DOI

10.5604/01.3001.0053.8668

• Języki publikacji: EN

Abstrakty

EN

Modelling of the similar depth profiles of two different kinds of ions, implanted to WC-Co tools, used in wood-based material machining. An attempt was made to model the similar depth profiles of ions of two commonly used gases, i.e., nitrogen and argon, for the parameter values possible to obtain using classical implanters. Modelling was executed in two stages. Similar profiles were obtained for the acceleration voltage value of 35 kV in the case of nitrogen and the sum of the acceleration voltages of 65+32.5 kV in the case of argon. The difference in the obtained profile parameter values, such as: the peak volume dopant concentration of the implanted element, the projected range and the range straggling, was less than 1%.

PL

Modelowanie podobnych głębokościowych profili dwóch różnych rodzajów jonów, implantowanych do narzędzi WC-Co, wykorzystywanych w obróbce materiałów drewnopochodnych. Podjęto próbę modelowania tożsamych głębokościowych profili implantowanych jonów dwóch powszechnie stosowanych gazów, tj. azotu i argonu, dla wartości parametrów możliwych do uzyskania w przypadku klasycznych implantatorów. Modelowanie było prowadzone dwuetapowo. Tożsame profile zostały uzyskane dla wartości napięcia przyspieszającego na poziomie 35 kV w przypadku azotu i sumy napięć 65+32,5 kV w przypadku argonu. Różnica w wartości znaczących parametrów uzyskanych profili, takich jak: maksymalna koncentracja objętościowa implantowanego pierwiastka, zasięg rzutowany oraz rozrzut zasięgu, była mniejsza niż 1%.

Słowa kluczowe

EN

ion implantation; depth profiles; modeling; WC-Co tools; wood machining

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2023
• Tom: No. 122
• Strony: 47--56
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Barlak Marek

• Plasma/Ion Beam Technology Division, Material Physics Department, National Centre for Nuclear Research Świerk, 7 Andrzeja Sołtana St., 05-400 Otwock, Poland

autor

Wilkowski Jacek

• Department of Mechanical Processing of Wood, Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences, 159 Nowoursynowska St., 02-776 Warsaw, Poland

autor

Werner Zbigniew

• Plasma/Ion Beam Technology Division, Material Physics Department, National Centre for Nuclear Research Świerk, 7 Andrzeja Sołtana St., 05-400 Otwock, Poland

Bibliografia

• 1. BARLAK M., WILKOWSKI J., WERNER Z., 2016: Ion implantation changes of tribological and corrosion resistance properties of materials used in wood industry, Annals of Warsaw University of Life Science - SGGW, Forestry and Wood Technology 94, 19-27.
• 2. BARLAK M., WILKOWSKI J., BORUSZEWSKI P., WERNER Z., PAŁUBICKI B., 2017: Changes of functional properties of materials used in wood industry after ion implantation processes, Annals of Warsaw University of Life Science - SGGW, Forestry and Wood Technology 97, 133-139.
• 3. BARLAK M., WILKOWSKI J., SZYMANOWSKI K., CZARNIAK P., PODZIEWSKI P., WERNER Z., ZAGÓRSKI J., STASZKIEWICZ B., 2019a: Influence of the ion implantation of nitrogen and selected metals on the lifetime of WC-Co indexable knives during MDF machining, Annals of Warsaw University of Life Science - SGGW, Forestry and Wood Technology 108, 45-52. DOI: 10.5604/01.3001.0013.7680.
• 4. BARLAK M., WILKOWSKI J., WERNER Z., 2019b: Modelling of the ion implantation modification of WC-Co indexable knives for wood machining, Annals of 61Warsaw University of Life Science - SGGW, Forestry and Wood Technology 106, 57- 61 DOI: 10.5604/01.3001.0013.7737.
• 5. BARLAK M., WILKOWSKI J., WERNER Z., 2019c: Modelling of nitrogen implantation processes into WC-Co indexable knives for wood-based material machining using ion implanters with or without direct ion beam, Annals of Warsaw University of Life Science - SGGW, Forestry and Wood Technology 108, 68-78. DOI: 10.5604/01.3001.0013.7684.
• 6. BARLAK M., WILKOWSKI J., WERNER Z., 2019d: The selected problems of the modelling of the depth profiles of the elements implanted to the tools used in wood material machining, Biuletyn Informacyjny OB-RPPD 3-4, 118-134. DOI: 10.32086/biuletyn.2019.5.
• 7. DEARNALEY G., ARPS J., 2006: Ion surface treatment of materials. in Y Pauleau, ed. Materials surface processing by directed energy techniques, 1st edition. Elsevier Science Publishers Ltd., London, UK. 101-120.
• 8. KO P., 1998: Tribology in secondary wood machining. in S Bahadur and JH Magee, eds. Wear processes in manufacturing, 1st edition. American Society for Testing and Materials, Atlanta, GA. 101-120.
• 9. RAEBEL S., WORZALA F., CONRAD J., 1990: PSII nitrogen implanted M2 tool steel for wear resistance in wood machining tools. in S Shaker, ed. Surface engineering, 1st edition. Elsevier Science Publishers Ltd., London, UK. 198-207.
• 10. SRIM. Stopping and Range of Ions in Matter: http://www.srim.org/.
• 11. SUSPRE. Surrey University Sputter Profile From Energy Deposition https://uknibc.co.uk/SUSPRE/.
• 12. WILKOWSKI J., BARLAK M., WERNER Z., ZAGÓRSKI J., CZARNIAK P.,PODZIEWSKI P., SZYMANOWSKI K., 2019: Technical note: Lifetime improvement and the cutting forces in nitrogen-implanted drills during wood-based material machining, Wood and Fiber Science 51, 209-220. DOI: 10.22382/wfs-2019-021.
• 13. WILKOWSKI J., BARLAK M., BOTTGER R., WERNER Z., KONARSKI P., PISAREK M., WACHOWICZ, J., VON BORANY J., AURIGA A., 2021: Effect of nitrogen ion implantation on the life time of WC-Co tools used in particleboard milling. Wood Material Science & Engineering 17, 521-532. DOI: 10.1080/17480272.2021.1900391.
• 14. WILKOWSKI J., BARLAK M., KWIDZIŃSKI Z., WILCZYŃSKI A., FILIPCZUK P., PĘDZIK M., DREWCZYŃSKI M., ZAGÓRSKI J., STASZKIEWICZ B., ROGOZIŃSKI T., 2022: Influence of ion implantation on the wear and lifetime of circular saw blades in industrial production of wooden door frames, Applied Sciences12, 10211. DOI: 10.3390/app122010211.
• 15. WILKOWSKI J., BARLAK M., 2022: Infinite life time of cutting tools - theoretical considerations in context of the relativistic tribology, Biuletyn Informacyjny OB RPPD 1-2, 43-58.