Deform 3D and Solidworks FEM tests in conditions of sliding friction

• Autorzy: Lenik K. , Korga S.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of this study is to compare systems, modelling and FEM analysis for metal forming on the example of upsetting conditions in a specially constructed tribological apparatus. Design/methodology/approach: Modelling and analysis of the process of upsetting the traffic conditions using the Deform 3D software ver. 10 and Solidworks 2010 - Simulation Module. Findings: The paper presents a comparison of the results of tests conducted in real and virtual conditions. It describes the adopted common features and different research methods. Research limitations/implications: The research of sample upsetting in movement conditions enables to determinate the effectiveness of accepted research methods. Practical implications: Finite element method can be used as an effective tool for the study of phenomena forming when considering different operating conditions of individual elements provided the appropriate tools for FEA. Originality/value: The use of sliding friction apparatus and FEM for plastic deformation processes in research.

Słowa kluczowe

EN

FEM analysis; tribological processes; sliding friction; plastic deformation modeling

PL

analiza MES; procesy tribologiczne; tarcie ślizgowe; modelowanie deformacji tworzywa

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2012
• Tom: Vol. 56, nr 2
• Strony: 89--92

Twórcy

autor

Lenik K.

• Department of Fundamental Technics, Lublin University of Technology, ul. Nadbystrzycka 38, 20-618 Lublin, Poland

autor

Korga S.

• Department of Fundamental Technics, Lublin University of Technology, ul. Nadbystrzycka 38, 20-618 Lublin, Poland

Bibliografia

• [1] J. Podgórski, E. Błazik-Borowa, The introduction to FEM in statics of machine construction, Lublin, 2001(in Polish).
• [2] L.A. Dobrzański, Technical material selection with characteristic charts, Gliwice, 2000 (in Polish).
• [3] K. Lenik et al., Test device for frictional resistance patent, WUP PL-170088B1 (in Polish).
• [4] K. Lenik, S. Korga, FEM applications to model friction processes in plastic strain conditions, Archives of Materials Science and Engineering 41/2 (2010) 121-124.
• [5] G. Rakowski, FEM – selected problems, Warsaw, 1996 (in Polish).
• [6] K. Lenik, M. Paszeczko, Z. Durjagina, K. Dziedzic, M. Barszcz, The surface self organization in process friction and corrosion of composite materials, Archives of Materials Science and Engineering 30/1 (2008) 9-12.
• [7] J. Kopac, A. Stoić, M. Lucić, Experimental investigation of dynamic instability of the turning process, Computational Materials Science and Surface Engineering 1/2 (2009) 84-91.
• [8] F. Ayari, T. Lazghab, E. Bayraktar, Parametric Finite Element Analisis of square cup deep drawing, Computational Ma-terials Science and Surface Engineering 1/2 (2009) 106-111.
• [9] W. Kajzer, A. Kajzer, J. Marciniak, FEM analysis of compression screws used for small bone treatment, Journal of Achievements in Materials and Manufacturing Engi-neering 33/2 (2009) 189-196.
• [10] B. Smolian, S. Smokvina Hanza, D. Iljkić, G.E. Totten, I. Felde, Computer simulation of mechanical properties of steal dies, Proceedings of the 2nd International Conference on Heat Treatment and Surface Engineering of Tools and Dies, Ljuljana, Slovenia, 2008.
• [11] M.C. Cakir Y. Isik, Finite element analysis of cutting tools prior to fracture in hard turning operations, Materials and Design 26/2 (2005) 105-112.
• [12] B. Smolian, D. IIjkić, S. Smokvina Hanza, Computer simulation of working stress of heat treated steel specimen, Journal of Achievements in Materials and Manufacturing Engineering 34/2 (2009) 152-156.
• [13] J.L. Andreasen, L. De Chifre, Automatic Chip-Breaking Detection in Turning by Frequency Analysis of Cutting Force, CIRP Annals - Manufacturing Technology 42/1 (1993) 45-48.
• [14] J. Trzaska, L.A Dobrzański, A. Jagiełło, Computer programme for prediction steel parameters after heat treatment, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 171-174.