Numerical simulation of wear of basalt lava spinning rolls

• Autorzy: Klimpel A. , Lisiecki A. , Janicki D.
• Języki publikacji: EN

Abstrakty

EN

Purpose: of this paper: Results of the study of wear phenomena of cascade spinning rolls during stone wool production process are described. Design/methodology/approach: The study was based on direct process observations, chemical analysis and temperature measurements of basalt lava, metallographic examinations of the spinning rolls deposits. It was showed that the deposits of spinning rolls are worn in very different way, depending on the roll position in rolls cascade. Findings: Predominant wear phenomena of the fully austenitic Grade 310 deposit of spinning roll no 1 is molten basalt lava corrosion-oxidation accompanied by low and high cycle thermal fatigue, high temperature basalt lava erosion at low velocity of basalt lava stream impinging the working surface at high angle. Predominant wear phenomena of the austenitic-ferritic Grade S32304 deposit of spinning roll no 2 is high temperature basalt lava erosion at very high velocity of lava stream impinging the working surface at high angle what is the cause of much faster wear of then spinning roll no 1. High temperature erosion wear is accompanied by molten basalt lava corrosion-oxidation and low and high cycle thermal fatigue processes. Predominant wear phenomena of the austenitic-ferritic Grade S32304 deposits spinning roll no 3 and roll no 4 is high temperature basalt lava abrasion as sprayed by rolls no 1 and no 2 fibers of solidifying basalt lava impinge the working surface of spinning rolls no 3 and no 4. Research limitations/implications: The mechanisms of high temperature erosion demands further investigations and detailed studies. Practical implications: The wear resistance of basalt lava spinning rolls can be increased. Originality/value: The mechanisms of surface layer wear of basalt lava spinning rolls were determined.

Słowa kluczowe

EN

welding; spinning rolls; basalt lava

PL

spawanie; rolki rozwłókniarki; lawa bazaltowa

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2006
• Tom: Vol. 18, nr 1-2
• Strony: 391--394
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Klimpel A.

• Welding Department, Silesian University of Technology, ul. Konarskiego 18a, Gliwice 44-100, Poland

autor

Lisiecki A.

• Welding Department, Silesian University of Technology, ul. Konarskiego 18a, Gliwice 44-100, Poland

autor

Janicki D.

• Welding Department, Silesian University of Technology, ul. Konarskiego 18a, Gliwice 44-100, Poland

Bibliografia

• [1] G.E. Linnert.: Welding Metallurgy Carbon and Alloy Steels. AWS. Miami, Florida, 1994. Ed. 4. Vol.1. Fundamentals. Chapter 6, s.628-633. Ed.4. Vol. 2. Technology. Chapter 10. s.100-107.
• [2] A.M Fox.: Atomic and Lasers Physics.: www.shef.ac.uk/ph ysics/teaching/phy332/laser_notes.pdf.
• [3] J. Buława.: Application of laser in Polish Industry. Bulletin of Welding Institute, Gliwice, 5/2001.
• [4] M. Banasik.: Molecular CO2 lasers and welding application, Polish Welding Journal. no 9/2000.
• [5] Publishing House The Chronicle. The Chronicle of Technique. Warszawa 1992.
• [6] J. Kusiński.: Application of lasers in material engineering. Swietokrzyska Polytechnic. Mechanics. 2001.
• [7] B.W. Schilling.: Encyclopedia of Optical Engineering. http://www2.dekker.com.
• [8] A. Cenian, E. Zaremba, M. Frankowski.: Lasers in medicine: http://www.imp.gda.pl/implaser/mat_szkol_r1.htm.
• [9] T. Fiszer.: Action of laser.: http://www.ftj.agh.edu.pl/~fiszer/laser/lasery.htm.
• [10] R. Aldrich.: Laser Fundamentals.: http://www.fas.org/man/dod-101/navy/docs/laser/fundamentals.htm.
• [11] Properties of laser light.: www.biofiz.am.wroc.pl/instrukcje/c28.pdf.
• [12] L Migliore.: Lasers materials procesing. Marcel Dekker Inc 1996.
• [13] Laser Machining Processes - TEM Mode, Beam Diameter, Focal Spot Size and Depth of Focus. http://www.columbia.edu/cu/mechanical/mrl/ntm/level2/ch02/html/l2c02s07.html.
• [14] A. Klimpel.: High power diode lasers in welding. Polish Welding Journal, no. 8/1999.
• [15] T. Szulc.: Laser Cutting – opportunities and limitation. Polish Welding Journal, no. 8-10/2002.
• [16] List of laser types.: http://en.wikipedia.org/wiki/List_of_laser_types.
• [17] MEOS - CO2 laser work station.: http://meos.com/Downloads.htm..
• [18] P.L. Smith.: A tiny package houses a powerhouse of a laser. American Machinist.: http://www.americanmachinist.com/304/Technologies/LasersPlasmaCut/Article/False/9141/.
• [19] C.A. Walsh., H.K.D.H. Bhadeshia., A. Lau., B. Matthias., R. Oesterlein., J. Drechsel.: Characteristics of High-Power Diode Laser Welds for Industrial Assembly.: www.msm.cam.ac.uk/phase-trans/2001/carrie.pdf.