Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The study has been intended to determine the most essential mechanical and fatigue properties as well as impact strength of the 30HGSNA steel, to gain own data on the above-mentioned characteristics of materials to be used further on in numerical analyses of life estimates of aeronautical structural components. The scope of the study comprised the following assignments:
- determination of the most fundamental mechanical properties and impact strength of materials,
- low-cycle fatigue testing and evaluation of the Manson-Coffin curves,
- high-cycle fatigue testing and evaluation of the Wöhler curves,
- investigation into fatigue crack growth rates at constant and variable load-cycle amplitudes (determination of curves da/dN = f(ΔK, R), coefficients in Paris and NASGRO equations, coefficients in the Wheeler models of delay, the value of Kth(R)),
- crack toughness testing under the plane-state-of-strain conditions at room temperature (determination of the KIc(R)). The strength/fatigue testing was carried out in the Laboratory for Materials Strength Testing of the AFIT’s Division for Aeronautical Systems Reliability and Safety, the lab being accredited by the Polish Centre for Accreditation (Accreditation Certificate No.: AB 430).
- determination of the most fundamental mechanical properties and impact strength of materials,
- low-cycle fatigue testing and evaluation of the Manson-Coffin curves,
- high-cycle fatigue testing and evaluation of the Wöhler curves,
- investigation into fatigue crack growth rates at constant and variable load-cycle amplitudes (determination of curves da/dN = f(ΔK, R), coefficients in Paris and NASGRO equations, coefficients in the Wheeler models of delay, the value of Kth(R)),
- crack toughness testing under the plane-state-of-strain conditions at room temperature (determination of the KIc(R)). The strength/fatigue testing was carried out in the Laboratory for Materials Strength Testing of the AFIT’s Division for Aeronautical Systems Reliability and Safety, the lab being accredited by the Polish Centre for Accreditation (Accreditation Certificate No.: AB 430).
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
74--83
Opis fizyczny
Bibliogr. 2 poz., rys., tab., wykr., wzory
Twórcy
autor
- Air Force Institute of Technology, Warsaw, Poland
autor
- Air Force Institute of Technology, Warsaw, Poland
Bibliografia
- 1. American Society fot Testing and Materials. (2004). Standard Practice for Strain-Controlled Testing. E 606. West Conshonocken, PA: ASTM International. (DOI 10.1520/E0606-04E01)
- 2. PN-ISO (1996) Metals - Sheets and Tapes – Determination of Tensile Strain-Hardening Exponent. 10275. Polish Committee for Standardization, Warsaw, Poland.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-e2b5b561-846a-4b64-8379-f328b2234a75
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.