High compression spark ignition engine with variable compression ratio using Active Combustion Chamber

• Autorzy: Kubiak Przemysław , Glogowski Michal , Soghabatyan Tigran , Mrowicki Adam , D'Errico Gianluca

Identyfikatory

DOI

10.14669/AM.VOL86.ART1

• Języki publikacji: EN

Abstrakty

EN

Abstract In this article Authors present the continuation of the calculations for theoretical ACC engine cycle, considering additionally “VCR function” – changeable compression level. For this purpose the self-acting volume change, realized by ACC system, was used. The ACC system was adjusted appropriately to control the compression level. The analysis is based on three cases, representing delayed, premature and optimal reaction of ACC system. Reactions are presented in form of plots with indicated pressure in the combustion chamber. As the result of the conducted analysis and interpretation of obtained graphs, the calculation approach of compression ratio for ACC presented in previous article is being challenged. For the optimal reaction of ACC system, the theoretical operation schematics are devised and presented in the key points of the work. Based on the schematics, the values of theoretical efficiency were calculated for different cycles of theoretical ACC engine, in which regulation of compression ratio takes place. Moreover, the presented analysis includes graphs with optimal courses of indicated pressure for significantly different work parameters of ACC engine, showing its regulation possibilities. Also the time scaled graphs (with millisecond as basic time unit) are presented to show the possibilities of dynamic ACC systems, which are comparable with the combustion time (from 3 to 0,5 ms). In this paper the general discussion is started about the compression ratio in more complex kinematic systems including ACC.

Słowa kluczowe

EN

internal combustion engine; theoretical cycle; variable compression ratio; additional volume; active combustion chamber

• Wydawca: Wydawnictwo Naukowe Sieci Badawczej Łukasiewicz - Przemysłowego Instytutu Motoryzacji
• Czasopismo: Archiwum Motoryzacji
• Rocznik: 2019
• Tom: Vol. 86, nr 4
• Strony: 5--26
• Opis fizyczny: Bibliogr. 28 poz., rys., tab., wykr., wz.

Twórcy

autor

Kubiak Przemysław

• Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, 1/15 Stefanowskiego Str., 90-924 Lodz, Polska

autor

Glogowski Michal

• Department of Process Equipment, Lodz University of Technology, Wolczanska 213 Str., 90-924 Lodz, Polska

autor

Soghabatyan Tigran

• Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, 1/15 Stefanowskiego Str., 90-924 Lodz, Polska

autor

Mrowicki Adam

• Department of Vehicles and Fundamentals of Machine Design, Lodz University of Technology, 1/15 Stefanowskiego Str., 90-924 Lodz, Polska

autor

D'Errico Gianluca

• Department of Energy, Politecnico di Milano, Via Lambruschini 4, 20156 Milano, Italy

Bibliografia

• [1] Alkidas AC. Heat transfer characteristics of a spark-ignition engine. Journal of Heat Transfer, 102(2), 1980, 189-193, DOI:10.1115/1.3244258.
• [2] Balcerzak M, Dąbrowski A, Kapitaniak T, Jach A.. Optimization of the Control System Parameters with Use of the New Simple Method of the Largest Lyapunov Exponent Estimation. Mechanics and Mechanical Engineering,17(3), 2013, 225–239.
• [3] Beale WT. U.S. Patent No. 6,170,442. Washington DC: U.S. Patent and Trademark Office, 2001.
• [4] Boretti A. Towards 40% efficiency with BMEP exceeding 30 bar in directly injected, turbocharged, spark ignition ethanol engines. Energy conversion and management, 57, 2012, 154-166, DOI: 10.1016/j.enconman.2011.12.011.
• [5] Brzeski P, Pavlovskaia E, Kapitaniak T, Perlikowski P. The application of inerter in tuned mass absorber. International Journal of Non-Linear Mechanics, 70, 2015, 20-29, DOI: 10.1016/j.ijnonlinmec.2014.10.013.
• [6] Colton RJ. U.S. Patent No. 2,914,047. Washington, DC: U.S. Patent and Trademark Office,1959.
• [7] Dąbrowski A. Energy–vector method in mechanical oscillations. Chaos, Solitons & Fractals, 39(4), 2009, 1684-1697, DOI: 10.1016/j.chaos.2007.06.096.
• [8] Dąbrowski A. Estimation of the largest Lyapunov exponent from the perturbation vector and its derivative dot product. Nonlinear Dynamics, 67(1), 2012, 283-291, DOI 10.1007/s11071-011-9977-6.
• [9] Dąbrowski A. The largest transversal Lyapunov exponent and master stability function from the perturbation vector and its derivative dot product (TLEVDP). Nonlinear Dynamics, 69(3), 2012, 1225-1235, DOI 10.1007/s11071-012-0342-1.
• [10] Dąbrowski A, Kapitaniak T. Using chaos to reduce oscillations: experimental results. Chaos, Solitons & Fractals, 39(4), 2009, 1677-1683, DOI: 10.1016/j.chaos.2007.06.126.
• [11] Dąbrowski A, Jach A, Kapitaniak T. Application of artificial neural networks in parametrical investigations of the energy flow and synchronization. Journal of Theoretical and Applied Mechanics, 48, 2009, 871-896.
• [12] Douaud AM, Eyzat P. Four-octane-number method for predicting the anti-knock behavior of fuels and engines. SAE Transactions, 1978, 294-308, DOI: 10.4271/780080.
• [13] Ghojel JI. Review of the development and applications of the Wiebe function: a tribute to the contribution of Ivan Wiebe to engine research. International Journal of Engine Research, 11(4), 2010, 297-312, DOI:10.1243/14680874JER06510.
• [14] Głogowski M. Patent No: US8,720,397 B2, 2014.
• [15] Głogowski M, Kubiak P, Šarić Ž, Barta D. New teoretical cycle for active combustion chamber engine. Archiwum Motoryzacji, 83(1), 2019, 23-42, DOI: 10.14669/AM.VOL83.ART2.
• [16] Guy E. U.S. Patent No. 5,476,072. Washington, DC: U.S. Patent and Trademark Office, 1995.
• [17] Haraldsson G, Tunestål P, Johansson B, Hyvönen J. HCCI combustion phasing in a multi cylinder engine using variable compression ratio. SAE Transactions, 2002, 2654-2663, DOI: 10.4271/2002-01-2858.
• [18] Haraldsson G, Tunestål P, Johansson B, Hyvönen J. HCCI combustion phasing with closed-loop combustion control using variable compression ratio in a multi cylinder engine. SAE Transactions, 2003,1233-1245, DOI:10.4271/2003-01-1830.
• [19] Heywood JB. Internal engine combustion fundamentals. McGraw-Hill, 1988.
• [20] Howard GE. Internal Combustion Motor, US2419450, 1947.
• [21] Hunicz J, Geca M, Rysak A, Litak G, Kordos P. Combustion timing variability in a light boosted controlled autoignition engine with direct fuel injection. Journal of Vibroengineering, 15(3), 2013, 1093-1101.
• [22] Kanesaka H. U.S. Patent No. 5,123,388. Washington, DC: U.S. Patent and Trademark Office, 1992.
• [23] Kirke P, Morris FS. Improvements in internal combustion engines GB190827740A, 1908.
• [24] Shadloo MS, Poultangari R, Jamalabadi MA, Rashidi MM. A new and efficient mechanism for spark ignition engines. Energy conversion and management, 96, 2015, 418-429, DOI: 10.1016/j.enconman.2015.03.017.
• [25] Turner JWG, Blundell DW, Pearson RJ, Patel R, Larkman DB, BurkeP, Kee RJ. Project omnivore: a variable compression ratio atac 2-stroke engine for Ultra-wide-range HCCI operation on a variety of fuels. SAE International Journal of Engines, 3(1), 2010, 938-955, DOI: 10.4271/2010-01-1249.
• [26] Vibe II, Meißner F. Brennverlauf und kreisprozess von verbrennungsmotoren. Verlag Technik, 1970.
• [27] Woschni G. A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE Technical paper No. 670931, 1967, DOI: 10.4271/670931.
• [28] Zhan YL, Wan BY, Wang XZ, Hu, YH. A simulation model for the main engine of the modern containership. In Proceedings of 2004 International Conference on Machine Learning and Cybernetics (IEEE Cat. No. 04EX826), 5, 2004, 2996-3002, DOI: 10.1109/ICMLC.2004.1378546.